62 lines
2 KiB
Plaintext
Executable file
62 lines
2 KiB
Plaintext
Executable file
Analog Device AXI-DMAC DMA controller
|
|
|
|
Required properties:
|
|
- compatible: Must be "adi,axi-dmac-1.00.a".
|
|
- reg: Specification for the controllers memory mapped register map.
|
|
- interrupts: Specification for the controllers interrupt.
|
|
- clocks: Phandle and specifier to the controllers AXI interface clock
|
|
- #dma-cells: Must be 1.
|
|
|
|
Required sub-nodes:
|
|
- adi,channels: This sub-node must contain a sub-node for each DMA channel. For
|
|
the channel sub-nodes the following bindings apply. They must match the
|
|
configuration options of the peripheral as it was instantiated.
|
|
|
|
Required properties for adi,channels sub-node:
|
|
- #size-cells: Must be 0
|
|
- #address-cells: Must be 1
|
|
|
|
Required channel sub-node properties:
|
|
- reg: Which channel this node refers to.
|
|
- adi,length-width: Width of the DMA transfer length register.
|
|
- adi,source-bus-width,
|
|
adi,destination-bus-width: Width of the source or destination bus in bits.
|
|
- adi,source-bus-type,
|
|
adi,destination-bus-type: Type of the source or destination bus. Must be one
|
|
of the following:
|
|
0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
|
|
1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
|
|
2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
|
|
|
|
Optional channel properties:
|
|
- adi,cyclic: Must be set if the channel supports hardware cyclic DMA
|
|
transfers.
|
|
- adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
|
|
|
|
DMA clients connected to the AXI-DMAC DMA controller must use the format
|
|
described in the dma.txt file using a one-cell specifier. The value of the
|
|
specifier refers to the DMA channel index.
|
|
|
|
Example:
|
|
|
|
dma: dma@7c420000 {
|
|
compatible = "adi,axi-dmac-1.00.a";
|
|
reg = <0x7c420000 0x10000>;
|
|
interrupts = <0 57 0>;
|
|
clocks = <&clkc 16>;
|
|
#dma-cells = <1>;
|
|
|
|
adi,channels {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
dma-channel@0 {
|
|
reg = <0>;
|
|
adi,source-bus-width = <32>;
|
|
adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
|
|
adi,destination-bus-width = <64>;
|
|
adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
|
|
};
|
|
};
|
|
};
|