231 lines
7 KiB
Plaintext
Executable file
231 lines
7 KiB
Plaintext
Executable file
Texas Instruments eDMA
|
|
|
|
The eDMA3 consists of two components: Channel controller (CC) and Transfer
|
|
Controller(s) (TC). The CC is the main entry for DMA users since it is
|
|
responsible for the DMA channel handling, while the TCs are responsible to
|
|
execute the actual DMA tansfer.
|
|
|
|
------------------------------------------------------------------------------
|
|
eDMA3 Channel Controller
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Should be:
|
|
- "ti,edma3-tpcc" for the channel controller(s) on OMAP,
|
|
AM33xx and AM43xx SoCs.
|
|
- "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
|
|
channel controller(s) on 66AK2G.
|
|
- #dma-cells: Should be set to <2>. The first number is the DMA request
|
|
number and the second is the TC the channel is serviced on.
|
|
- reg: Memory map of eDMA CC
|
|
- reg-names: "edma3_cc"
|
|
- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT.
|
|
- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
|
|
- ti,tptcs: List of TPTCs associated with the eDMA in the following form:
|
|
<&tptc_phandle TC_priority_number>. The highest priority is 0.
|
|
|
|
SoC-specific Required properties:
|
|
--------------------------------
|
|
The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
|
|
- ti,hwmods: Name of the hwmods associated to the eDMA CC.
|
|
|
|
The following are mandatory properties for 66AK2G SoCs only:
|
|
- power-domains:Should contain a phandle to a PM domain provider node
|
|
and an args specifier containing the device id
|
|
value. This property is as per the binding,
|
|
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
|
|
|
|
Optional properties:
|
|
-------------------
|
|
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
|
|
these channels will be SW triggered channels. See example.
|
|
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
|
|
the driver, they are allocated to be used by for example the
|
|
DSP. See example.
|
|
|
|
------------------------------------------------------------------------------
|
|
eDMA3 Transfer Controller
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Should be:
|
|
- "ti,edma3-tptc" for the transfer controller(s) on OMAP,
|
|
AM33xx and AM43xx SoCs.
|
|
- "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
|
|
transfer controller(s) on 66AK2G.
|
|
- reg: Memory map of eDMA TC
|
|
- interrupts: Interrupt number for TCerrint.
|
|
|
|
SoC-specific Required properties:
|
|
--------------------------------
|
|
The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
|
|
- ti,hwmods: Name of the hwmods associated to the eDMA TC.
|
|
|
|
The following are mandatory properties for 66AK2G SoCs only:
|
|
- power-domains:Should contain a phandle to a PM domain provider node
|
|
and an args specifier containing the device id
|
|
value. This property is as per the binding,
|
|
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
|
|
|
|
Optional properties:
|
|
-------------------
|
|
- interrupt-names: "edma3_tcerrint"
|
|
|
|
------------------------------------------------------------------------------
|
|
Examples:
|
|
|
|
1.
|
|
edma: edma@49000000 {
|
|
compatible = "ti,edma3-tpcc";
|
|
ti,hwmods = "tpcc";
|
|
reg = <0x49000000 0x10000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <12 13 14>;
|
|
interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
|
|
|
|
/* Channel 20 and 21 is allocated for memcpy */
|
|
ti,edma-memcpy-channels = <20 21>;
|
|
/* The following PaRAM slots are reserved: 35-44 and 100-109 */
|
|
ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
|
|
};
|
|
|
|
edma_tptc0: tptc@49800000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc0";
|
|
reg = <0x49800000 0x100000>;
|
|
interrupts = <112>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
|
|
edma_tptc1: tptc@49900000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc1";
|
|
reg = <0x49900000 0x100000>;
|
|
interrupts = <113>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
|
|
edma_tptc2: tptc@49a00000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc2";
|
|
reg = <0x49a00000 0x100000>;
|
|
interrupts = <114>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
|
|
sham: sham@53100000 {
|
|
compatible = "ti,omap4-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x53100000 0x200>;
|
|
interrupts = <109>;
|
|
/* DMA channel 36 executed on eDMA TC0 - low priority queue */
|
|
dmas = <&edma 36 0>;
|
|
dma-names = "rx";
|
|
};
|
|
|
|
mcasp0: mcasp@48038000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
ti,hwmods = "mcasp0";
|
|
reg = <0x48038000 0x2000>,
|
|
<0x46000000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <80>, <81>;
|
|
interrupt-names = "tx", "rx";
|
|
/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
|
|
dmas = <&edma 8 2>,
|
|
<&edma 9 2>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
2.
|
|
edma1: edma@2728000 {
|
|
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
|
|
reg = <0x02728000 0x8000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "edma3_ccint", "emda3_mperr",
|
|
"edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
|
|
|
|
/*
|
|
* memcpy is disabled, can be enabled with:
|
|
* ti,edma-memcpy-channels = <12 13 14 15>;
|
|
* for example.
|
|
*/
|
|
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
edma1_tptc0: tptc@27b0000 {
|
|
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x027b0000 0x400>;
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
edma1_tptc1: tptc@27b8000 {
|
|
compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x027b8000 0x400>;
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
mmc0: mmc@23000000 {
|
|
compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
|
|
reg = <0x23000000 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
|
|
dmas = <&edma1 24 0>, <&edma1 25 0>;
|
|
dma-names = "tx", "rx";
|
|
bus-width = <4>;
|
|
ti,needs-special-reset;
|
|
no-1-8-v;
|
|
max-frequency = <96000000>;
|
|
power-domains = <&k2g_pds 0xb>;
|
|
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
|
|
clock-names = "fck", "mmchsdb_fck";
|
|
};
|
|
|
|
------------------------------------------------------------------------------
|
|
DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
|
|
binding.
|
|
|
|
Required properties:
|
|
- compatible : "ti,edma3"
|
|
- #dma-cells: Should be set to <1>
|
|
Clients should use a single channel number per DMA request.
|
|
- reg: Memory map for accessing module
|
|
- interrupts: Exactly 3 interrupts need to be specified in the order:
|
|
1. Transfer completion interrupt.
|
|
2. Memory protection interrupt.
|
|
3. Error interrupt.
|
|
Optional properties:
|
|
- ti,hwmods: Name of the hwmods associated to the EDMA
|
|
- ti,edma-xbar-event-map: Crossbar event to channel map
|
|
|
|
Deprecated properties:
|
|
Listed here in case one wants to boot an old kernel with new DTB. These
|
|
properties might need to be added to the new DTS files.
|
|
- ti,edma-regions: Number of regions
|
|
- ti,edma-slots: Number of slots
|
|
- dma-channels: Specify total DMA channels per CC
|
|
|
|
Example:
|
|
|
|
edma: edma@49000000 {
|
|
reg = <0x49000000 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <12 13 14>;
|
|
compatible = "ti,edma3";
|
|
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
|
|
#dma-cells = <1>;
|
|
ti,edma-xbar-event-map = /bits/ 16 <1 12
|
|
2 13>;
|
|
};
|