41 lines
1.5 KiB
Plaintext
Executable file
41 lines
1.5 KiB
Plaintext
Executable file
NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
|
|
|
|
Required properties:
|
|
- compatible : For Tegra20, must contain "nvidia,tegra20-efuse". For Tegra30,
|
|
must contain "nvidia,tegra30-efuse". For Tegra114, must contain
|
|
"nvidia,tegra114-efuse". For Tegra124, must contain "nvidia,tegra124-efuse".
|
|
Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
|
|
<chip> is tegra132.
|
|
Details:
|
|
nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
|
|
due to a hardware bug. Tegra20 also lacks certain information which is
|
|
available in later generations such as fab code, lot code, wafer id,..
|
|
nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
|
|
The differences between these SoCs are the size of the efuse array,
|
|
the location of the spare (OEM programmable) bits and the location of
|
|
the speedo data.
|
|
- reg: Should contain 1 entry: the entry gives the physical address and length
|
|
of the fuse registers.
|
|
- clocks: Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: Must include the following entries:
|
|
- fuse
|
|
- resets: Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names: Must include the following entries:
|
|
- fuse
|
|
|
|
Example:
|
|
|
|
fuse@7000f800 {
|
|
compatible = "nvidia,tegra20-efuse";
|
|
reg = <0x7000f800 0x400>,
|
|
<0x70000000 0x400>;
|
|
clocks = <&tegra_car TEGRA20_CLK_FUSE>;
|
|
clock-names = "fuse";
|
|
resets = <&tegra_car 39>;
|
|
reset-names = "fuse";
|
|
};
|
|
|
|
|