59 lines
2.6 KiB
Plaintext
Executable file
59 lines
2.6 KiB
Plaintext
Executable file
SiFive Platform-Level Interrupt Controller (PLIC)
|
|
-------------------------------------------------
|
|
|
|
SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
|
|
(PLIC) high-level specification in the RISC-V Privileged Architecture
|
|
specification. The PLIC connects all external interrupts in the system to all
|
|
hart contexts in the system, via the external interrupt source in each hart.
|
|
|
|
A hart context is a privilege mode in a hardware execution thread. For example,
|
|
in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
|
|
privilege modes per hart; machine mode and supervisor mode.
|
|
|
|
Each interrupt can be enabled on per-context basis. Any context can claim
|
|
a pending enabled interrupt and then release it once it has been handled.
|
|
|
|
Each interrupt has a configurable priority. Higher priority interrupts are
|
|
serviced first. Each context can specify a priority threshold. Interrupts
|
|
with priority below this threshold will not cause the PLIC to raise its
|
|
interrupt line leading to the context.
|
|
|
|
While the PLIC supports both edge-triggered and level-triggered interrupts,
|
|
interrupt handlers are oblivious to this distinction and therefore it is not
|
|
specified in the PLIC device-tree binding.
|
|
|
|
While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
|
|
"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
|
|
contains a specific memory layout, which is documented in chapter 8 of the
|
|
SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
|
|
|
|
Required properties:
|
|
- compatible : "sifive,plic-1.0.0" and a string identifying the actual
|
|
detailed implementation in case that specific bugs need to be worked around.
|
|
- #address-cells : should be <0> or more.
|
|
- #interrupt-cells : should be <1> or more.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- reg : Should contain 1 register range (address and length).
|
|
- interrupts-extended : Specifies which contexts are connected to the PLIC,
|
|
with "-1" specifying that a context is not present. Each node pointed
|
|
to should be a riscv,cpu-intc node, which has a riscv node as parent.
|
|
- riscv,ndev: Specifies how many external interrupts are supported by
|
|
this controller.
|
|
|
|
Example:
|
|
|
|
plic: interrupt-controller@c000000 {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
|
|
interrupt-controller;
|
|
interrupts-extended = <
|
|
&cpu0-intc 11
|
|
&cpu1-intc 11 &cpu1-intc 9
|
|
&cpu2-intc 11 &cpu2-intc 9
|
|
&cpu3-intc 11 &cpu3-intc 9
|
|
&cpu4-intc 11 &cpu4-intc 9>;
|
|
reg = <0xc000000 0x4000000>;
|
|
riscv,ndev = <10>;
|
|
};
|