55 lines
1.6 KiB
Plaintext
Executable file
55 lines
1.6 KiB
Plaintext
Executable file
* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
|
|
|
|
The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
|
|
an active array size of 2592H x 1944V. It is programmable through a serial I2C
|
|
interface.
|
|
|
|
Required Properties:
|
|
- compatible: Value should be "ovti,ov5645".
|
|
- clocks: Reference to the xclk clock.
|
|
- clock-names: Should be "xclk".
|
|
- clock-frequency: Frequency of the xclk clock.
|
|
- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
|
|
to the hardware pin PWDNB which is physically active low.
|
|
- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
|
|
the hardware pin RESETB.
|
|
- vdddo-supply: Chip digital IO regulator.
|
|
- vdda-supply: Chip analog regulator.
|
|
- vddd-supply: Chip digital core regulator.
|
|
|
|
The device node must contain one 'port' child node for its digital output
|
|
video port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
|
|
&i2c1 {
|
|
...
|
|
|
|
ov5645: ov5645@78 {
|
|
compatible = "ovti,ov5645";
|
|
reg = <0x78>;
|
|
|
|
enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&camera_rear_default>;
|
|
|
|
clocks = <&clks 200>;
|
|
clock-names = "xclk";
|
|
clock-frequency = <23880000>;
|
|
|
|
vdddo-supply = <&camera_dovdd_1v8>;
|
|
vdda-supply = <&camera_avdd_2v8>;
|
|
vddd-supply = <&camera_dvdd_1v2>;
|
|
|
|
port {
|
|
ov5645_ep: endpoint {
|
|
clock-lanes = <1>;
|
|
data-lanes = <0 2>;
|
|
remote-endpoint = <&csi0_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|