82 lines
2.5 KiB
Plaintext
Executable file
82 lines
2.5 KiB
Plaintext
Executable file
Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
|
|
-------------------------------------------------------------
|
|
|
|
Required properties:
|
|
|
|
- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
|
|
"samsung,exynos4210-csis" for Exynos4210 (S5PC210),
|
|
"samsung,exynos4212-csis" for Exynos4212/Exynos4412,
|
|
"samsung,exynos5250-csis" for Exynos5250;
|
|
- reg : offset and length of the register set for the device;
|
|
- interrupts : should contain MIPI CSIS interrupt; the format of the
|
|
interrupt specifier depends on the interrupt controller;
|
|
- bus-width : maximum number of data lanes supported (SoC specific);
|
|
- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
|
|
- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V);
|
|
- clocks : list of clock specifiers, corresponding to entries in
|
|
clock-names property;
|
|
- clock-names : must contain "csis", "sclk_csis" entries, matching entries
|
|
in the clocks property.
|
|
|
|
Optional properties:
|
|
|
|
- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
|
|
value when this property is not specified is 166 MHz;
|
|
- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
|
|
external clock from CMU will be used, or the bus clock if
|
|
if it's not specified.
|
|
|
|
The device node should contain one 'port' child node with one child 'endpoint'
|
|
node, according to the bindings defined in Documentation/devicetree/bindings/
|
|
media/video-interfaces.txt. The following are properties specific to those nodes.
|
|
|
|
port node
|
|
---------
|
|
|
|
- reg : (required) must be 3 for camera C input (CSIS0) or 4 for
|
|
camera D input (CSIS1);
|
|
|
|
endpoint node
|
|
-------------
|
|
|
|
- data-lanes : (required) an array specifying active physical MIPI-CSI2
|
|
data input lanes and their mapping to logical lanes; the
|
|
array's content is unused, only its length is meaningful;
|
|
|
|
- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
|
|
|
|
|
|
Example:
|
|
|
|
reg0: regulator@0 {
|
|
};
|
|
|
|
reg1: regulator@1 {
|
|
};
|
|
|
|
/* SoC properties */
|
|
|
|
csis_0: csis@11880000 {
|
|
compatible = "samsung,exynos4210-csis";
|
|
reg = <0x11880000 0x1000>;
|
|
interrupts = <0 78 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
/* Board properties */
|
|
|
|
csis_0: csis@11880000 {
|
|
clock-frequency = <166000000>;
|
|
vddio-supply = <®0>;
|
|
vddcore-supply = <®1>;
|
|
port {
|
|
reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
|
|
csis0_ep: endpoint {
|
|
remote-endpoint = <...>;
|
|
data-lanes = <1>, <2>;
|
|
samsung,csis-hs-settle = <12>;
|
|
};
|
|
};
|
|
};
|