51 lines
1.4 KiB
Plaintext
Executable file
51 lines
1.4 KiB
Plaintext
Executable file
X-Powers AC100 Codec/RTC IC Device Tree bindings
|
|
|
|
AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
|
|
separated, including power supplies and interrupt lines, but share
|
|
a common register address space and host interface.
|
|
|
|
Required properties:
|
|
- compatible: "x-powers,ac100"
|
|
- reg: The I2C slave address or RSB hardware address for the chip
|
|
- sub-nodes:
|
|
- codec
|
|
- compatible: "x-powers,ac100-codec"
|
|
- interrupts: SoC NMI / GPIO interrupt connected to the
|
|
IRQ_AUDIO pin
|
|
- #clock-cells: Shall be 0
|
|
- clock-output-names: "4M_adda"
|
|
|
|
- see clock/clock-bindings.txt for common clock bindings
|
|
|
|
- rtc
|
|
- compatible: "x-powers,ac100-rtc"
|
|
- clocks: A phandle to the codec's "4M_adda" clock
|
|
- #clock-cells: Shall be 1
|
|
- clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
|
|
|
|
- see clock/clock-bindings.txt for common clock bindings
|
|
|
|
Example:
|
|
|
|
ac100: codec@e89 {
|
|
compatible = "x-powers,ac100";
|
|
reg = <0xe89>;
|
|
|
|
ac100_codec: codec {
|
|
compatible = "x-powers,ac100-codec";
|
|
interrupt-parent = <&r_pio>;
|
|
interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
|
|
#clock-cells = <0>;
|
|
clock-output-names = "4M_adda";
|
|
};
|
|
|
|
ac100_rtc: rtc {
|
|
compatible = "x-powers,ac100-rtc";
|
|
interrupt-parent = <&nmi_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&ac100_codec>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
|
|
};
|
|
};
|