57 lines
1.6 KiB
Plaintext
Executable file
57 lines
1.6 KiB
Plaintext
Executable file
* Device tree bindings for Atmel Timer Counter Blocks
|
|
- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
|
|
<chip> can be "at91rm9200" or "at91sam9x5"
|
|
- reg: Should contain registers location and length
|
|
- #address-cells: has to be 1
|
|
- #size-cells: has to be 0
|
|
- interrupts: Should contain all interrupts for the TC block
|
|
Note that you can specify several interrupt cells if the TC
|
|
block has one interrupt per channel.
|
|
- clock-names: tuple listing input clock names.
|
|
Required elements: "t0_clk", "slow_clk"
|
|
Optional elements: "t1_clk", "t2_clk"
|
|
- clocks: phandles to input clocks.
|
|
|
|
The TCB can expose multiple subdevices:
|
|
* a timer
|
|
- compatible: Should be "atmel,tcb-timer"
|
|
- reg: Should contain the TCB channels to be used. If the
|
|
counter width is 16 bits (at91rm9200-tcb), two consecutive
|
|
channels are needed. Else, only one channel will be used.
|
|
|
|
Examples:
|
|
|
|
One interrupt per TC block:
|
|
tcb0: timer@fff7c000 {
|
|
compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xfff7c000 0x100>;
|
|
interrupts = <18 4>;
|
|
clocks = <&tcb0_clk>, <&clk32k>;
|
|
clock-names = "t0_clk", "slow_clk";
|
|
|
|
timer@0 {
|
|
compatible = "atmel,tcb-timer";
|
|
reg = <0>, <1>;
|
|
};
|
|
|
|
timer@2 {
|
|
compatible = "atmel,tcb-timer";
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
One interrupt per TC channel in a TC block:
|
|
tcb1: timer@fffdc000 {
|
|
compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xfffdc000 0x100>;
|
|
interrupts = <26 4>, <27 4>, <28 4>;
|
|
clocks = <&tcb1_clk>, <&clk32k>;
|
|
clock-names = "t0_clk", "slow_clk";
|
|
};
|
|
|
|
|