62 lines
2.2 KiB
Plaintext
Executable file
62 lines
2.2 KiB
Plaintext
Executable file
* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
|
|
|
|
The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
|
|
reading and writing to MultiMedia and SD cards alike.
|
|
|
|
This file documents differences between the core properties described
|
|
by mmc.txt and the properties used by the mmci driver. Using "st" as
|
|
the prefix for a property, indicates support by the ST Micro variant.
|
|
|
|
Required properties:
|
|
- compatible : contains "arm,pl18x", "arm,primecell".
|
|
- vmmc-supply : phandle to the regulator device tree node, mentioned
|
|
as the VCC/VDD supply in the eMMC/SD specs.
|
|
|
|
Optional properties:
|
|
- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
|
|
the ID provided by the HW
|
|
- vqmmc-supply : phandle to the regulator device tree node, mentioned
|
|
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
|
|
- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
|
|
- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
|
|
- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
|
|
- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7].
|
|
- st,sig-dir-cmd : cmd signal direction pin used for CMD.
|
|
- st,sig-pin-fbclk : feedback clock signal pin used.
|
|
|
|
Deprecated properties:
|
|
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
|
|
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
|
|
|
|
Example:
|
|
|
|
sdi0_per1@80126000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80126000 0x1000>;
|
|
interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 29 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
|
|
clock-names = "sdi", "apb_pclk";
|
|
|
|
max-frequency = <100000000>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
cd-gpios = <&gpio2 31 0x4>; // 95
|
|
st,sig-dir-dat0;
|
|
st,sig-dir-dat2;
|
|
st,sig-dir-cmd;
|
|
st,sig-pin-fbclk;
|
|
|
|
vmmc-supply = <&ab8500_ldo_aux3_reg>;
|
|
vqmmc-supply = <&vmmci>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdi0_default_mode>;
|
|
pinctrl-1 = <&sdi0_sleep_mode>;
|
|
};
|