83 lines
2.1 KiB
Plaintext
Executable file
83 lines
2.1 KiB
Plaintext
Executable file
Microsemi Ocelot network Switch
|
|
===============================
|
|
|
|
The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
|
|
VSC7514)
|
|
|
|
Required properties:
|
|
- compatible: Should be "mscc,vsc7514-switch"
|
|
- reg: Must contain an (offset, length) pair of the register set for each
|
|
entry in reg-names.
|
|
- reg-names: Must include the following entries:
|
|
- "sys"
|
|
- "rew"
|
|
- "qs"
|
|
- "hsio"
|
|
- "qsys"
|
|
- "ana"
|
|
- "portX" with X from 0 to the number of last port index available on that
|
|
switch
|
|
- interrupts: Should contain the switch interrupts for frame extraction and
|
|
frame injection
|
|
- interrupt-names: should contain the interrupt names: "xtr", "inj"
|
|
- ethernet-ports: A container for child nodes representing switch ports.
|
|
|
|
The ethernet-ports container has the following properties
|
|
|
|
Required properties:
|
|
|
|
- #address-cells: Must be 1
|
|
- #size-cells: Must be 0
|
|
|
|
Each port node must have the following mandatory properties:
|
|
- reg: Describes the port address in the switch
|
|
|
|
Port nodes may also contain the following optional standardised
|
|
properties, described in binding documents:
|
|
|
|
- phy-handle: Phandle to a PHY on an MDIO bus. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt for details.
|
|
|
|
Example:
|
|
|
|
switch@1010000 {
|
|
compatible = "mscc,vsc7514-switch";
|
|
reg = <0x1010000 0x10000>,
|
|
<0x1030000 0x10000>,
|
|
<0x1080000 0x100>,
|
|
<0x10d0000 0x10000>,
|
|
<0x11e0000 0x100>,
|
|
<0x11f0000 0x100>,
|
|
<0x1200000 0x100>,
|
|
<0x1210000 0x100>,
|
|
<0x1220000 0x100>,
|
|
<0x1230000 0x100>,
|
|
<0x1240000 0x100>,
|
|
<0x1250000 0x100>,
|
|
<0x1260000 0x100>,
|
|
<0x1270000 0x100>,
|
|
<0x1280000 0x100>,
|
|
<0x1800000 0x80000>,
|
|
<0x1880000 0x10000>;
|
|
reg-names = "sys", "rew", "qs", "hsio", "port0",
|
|
"port1", "port2", "port3", "port4", "port5",
|
|
"port6", "port7", "port8", "port9", "port10",
|
|
"qsys", "ana";
|
|
interrupts = <21 22>;
|
|
interrupt-names = "xtr", "inj";
|
|
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port0: port@0 {
|
|
reg = <0>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
port1: port@1 {
|
|
reg = <1>;
|
|
phy-handle = <&phy1>;
|
|
};
|
|
};
|
|
};
|