134 lines
4.4 KiB
Plaintext
Executable file
134 lines
4.4 KiB
Plaintext
Executable file
* Broadcom iProc PCIe controller with the platform bus interface
|
|
|
|
Required properties:
|
|
- compatible:
|
|
"brcm,iproc-pcie" for the first generation of PAXB based controller,
|
|
used in SoCs including NSP, Cygnus, NS2, and Pegasus
|
|
"brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
|
|
controllers, used in Stingray
|
|
"brcm,iproc-pcie-paxc" for the first generation of PAXC based
|
|
controller, used in NS2
|
|
"brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
|
|
controller, used in Stingray
|
|
PAXB-based root complex is used for external endpoint devices. PAXC-based
|
|
root complex is connected to emulated endpoint devices internal to the ASIC
|
|
- reg: base address and length of the PCIe controller I/O register space
|
|
- #interrupt-cells: set to <1>
|
|
- interrupt-map-mask and interrupt-map, standard PCI properties to define the
|
|
mapping of the PCIe interface to interrupt numbers
|
|
- linux,pci-domain: PCI domain ID. Should be unique for each host controller
|
|
- bus-range: PCI bus numbers covered
|
|
- #address-cells: set to <3>
|
|
- #size-cells: set to <2>
|
|
- device_type: set to "pci"
|
|
- ranges: ranges for the PCI memory and I/O regions
|
|
|
|
Optional properties:
|
|
- phys: phandle of the PCIe PHY device
|
|
- phy-names: must be "pcie-phy"
|
|
- dma-coherent: present if DMA operations are coherent
|
|
- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
|
|
by the ASIC after power on reset. In this case, SW is required to configure
|
|
the mapping, based on inbound memory regions specified by this property.
|
|
|
|
- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
|
|
by the ASIC after power on reset. In this case, SW needs to configure it
|
|
|
|
If the brcm,pcie-ob property is present, the following properties become
|
|
effective:
|
|
|
|
Required:
|
|
- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
|
|
address used by the iProc PCIe core (not the PCIe address)
|
|
|
|
MSI support (optional):
|
|
|
|
For older platforms without MSI integrated in the GIC, iProc PCIe core provides
|
|
an event queue based MSI support. The iProc MSI uses host memories to store
|
|
MSI posted writes in the event queues
|
|
|
|
On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
|
|
|
|
- msi-map: Maps a Requester ID to an MSI controller and associated MSI
|
|
sideband data
|
|
|
|
- msi-parent: Link to the device node of the MSI controller, used when no MSI
|
|
sideband data is passed between the iProc PCIe controller and the MSI
|
|
controller
|
|
|
|
Refer to the following binding documents for more detailed description on
|
|
the use of 'msi-map' and 'msi-parent':
|
|
Documentation/devicetree/bindings/pci/pci-msi.txt
|
|
Documentation/devicetree/bindings/interrupt-controller/msi.txt
|
|
|
|
When the iProc event queue based MSI is used, one needs to define the
|
|
following properties in the MSI device node:
|
|
- compatible: Must be "brcm,iproc-msi"
|
|
- msi-controller: claims itself as an MSI controller
|
|
- interrupts: List of interrupt IDs from its parent interrupt device
|
|
|
|
Optional properties:
|
|
- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
|
|
require the interrupt enable registers to be set explicitly to enable MSI
|
|
|
|
Example:
|
|
pcie0: pcie@18012000 {
|
|
compatible = "brcm,iproc-pcie";
|
|
reg = <0x18012000 0x1000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
|
|
|
|
linux,pci-domain = <0>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
|
|
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
|
|
|
|
phys = <&phy 0 5>;
|
|
phy-names = "pcie-phy";
|
|
|
|
brcm,pcie-ob;
|
|
brcm,pcie-ob-axi-offset = <0x00000000>;
|
|
|
|
msi-parent = <&msi0>;
|
|
|
|
/* iProc event queue based MSI */
|
|
msi0: msi@18012000 {
|
|
compatible = "brcm,iproc-msi";
|
|
msi-controller;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 97 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 98 IRQ_TYPE_NONE>,
|
|
<GIC_SPI 99 IRQ_TYPE_NONE>,
|
|
};
|
|
};
|
|
|
|
pcie1: pcie@18013000 {
|
|
compatible = "brcm,iproc-pcie";
|
|
reg = <0x18013000 0x1000>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
|
|
|
|
linux,pci-domain = <1>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
|
|
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
|
|
|
|
phys = <&phy 1 6>;
|
|
phy-names = "pcie-phy";
|
|
};
|