89 lines
2.7 KiB
Plaintext
Executable file
89 lines
2.7 KiB
Plaintext
Executable file
* Xilinx AXI PCIe Root Port Bridge DT description
|
|
|
|
Required properties:
|
|
- #address-cells: Address representation for root ports, set to <3>
|
|
- #size-cells: Size representation for root ports, set to <2>
|
|
- #interrupt-cells: specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 1.
|
|
- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
|
|
- reg: Should contain AXI PCIe registers location and length
|
|
- device_type: must be "pci"
|
|
- interrupts: Should contain AXI PCIe interrupt
|
|
- interrupt-map-mask,
|
|
interrupt-map: standard PCI properties to define the mapping of the
|
|
PCI interface to interrupt numbers.
|
|
- ranges: ranges for the PCI memory regions (I/O space region is not
|
|
supported by hardware)
|
|
Please refer to the standard PCI bus binding document for a more
|
|
detailed explanation
|
|
|
|
Optional properties for Zynq/Microblaze:
|
|
- bus-range: PCI bus numbers covered
|
|
|
|
Interrupt controller child node
|
|
+++++++++++++++++++++++++++++++
|
|
Required properties:
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #address-cells: specifies the number of cells needed to encode an
|
|
address. The value must be 0.
|
|
- #interrupt-cells: specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 1.
|
|
|
|
NOTE:
|
|
The core provides a single interrupt for both INTx/MSI messages. So,
|
|
created a interrupt controller node to support 'interrupt-map' DT
|
|
functionality. The driver will create an IRQ domain for this map, decode
|
|
the four INTx interrupts in ISR and route them to this domain.
|
|
|
|
|
|
Example:
|
|
++++++++
|
|
Zynq:
|
|
pci_express: axi-pcie@50000000 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "xlnx,axi-pcie-host-1.00.a";
|
|
reg = < 0x50000000 0x1000000 >;
|
|
device_type = "pci";
|
|
interrupts = < 0 52 4 >;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc 1>,
|
|
<0 0 0 2 &pcie_intc 2>,
|
|
<0 0 0 3 &pcie_intc 3>,
|
|
<0 0 0 4 &pcie_intc 4>;
|
|
ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
|
|
|
|
pcie_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
|
|
Microblaze:
|
|
pci_express: axi-pcie@10000000 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "xlnx,axi-pcie-host-1.00.a";
|
|
reg = <0x10000000 0x4000000>;
|
|
device_type = "pci";
|
|
interrupt-parent = <µblaze_0_intc>;
|
|
interrupts = <1 2>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc 1>,
|
|
<0 0 0 2 &pcie_intc 2>,
|
|
<0 0 0 3 &pcie_intc 3>,
|
|
<0 0 0 4 &pcie_intc 4>;
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
|
|
|
|
pcie_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
};
|