81 lines
2.2 KiB
Plaintext
Executable file
81 lines
2.2 KiB
Plaintext
Executable file
Abilis Systems TB10x pin controller
|
|
===================================
|
|
|
|
Required properties
|
|
-------------------
|
|
|
|
- compatible: should be "abilis,tb10x-iomux";
|
|
- reg: should contain the physical address and size of the pin controller's
|
|
register range.
|
|
|
|
|
|
Function definitions
|
|
--------------------
|
|
|
|
Functions are defined (and referenced) by sub-nodes of the pin controller.
|
|
Every sub-node defines exactly one function (implying a set of pins).
|
|
Every function is associated to one named pin group inside the pin controller
|
|
driver and these names are used to associate pin group predefinitions to pin
|
|
controller sub-nodes.
|
|
|
|
Required function definition subnode properties:
|
|
- abilis,function: should be set to the name of the function's pin group.
|
|
|
|
The following pin groups are available:
|
|
- GPIO ports: gpioa, gpiob, gpioc, gpiod, gpioe, gpiof, gpiog,
|
|
gpioh, gpioi, gpioj, gpiok, gpiol, gpiom, gpion
|
|
- Serial TS input ports: mis0, mis1, mis2, mis3, mis4, mis5, mis6, mis7
|
|
- Parallel TS input ports: mip1, mip3, mip5, mip7
|
|
- Serial TS output ports: mos0, mos1, mos2, mos3
|
|
- Parallel TS output port: mop
|
|
- CI+ port: ciplus
|
|
- CableCard (Mcard) port: mcard
|
|
- Smart card ports: stc0, stc1
|
|
- UART ports: uart0, uart1
|
|
- SPI ports: spi1, spi3
|
|
- JTAG: jtag
|
|
|
|
All other ports of the chip are not multiplexed and thus not managed by this
|
|
driver.
|
|
|
|
|
|
GPIO ranges definition
|
|
----------------------
|
|
|
|
The named pin groups of GPIO ports can be used to define GPIO ranges as
|
|
explained in Documentation/devicetree/bindings/gpio/gpio.txt.
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
iomux: iomux@ff10601c {
|
|
compatible = "abilis,tb10x-iomux";
|
|
reg = <0xFF10601c 0x4>;
|
|
pctl_gpio_a: pctl-gpio-a {
|
|
abilis,function = "gpioa";
|
|
};
|
|
pctl_uart0: pctl-uart0 {
|
|
abilis,function = "uart0";
|
|
};
|
|
};
|
|
uart@ff100000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xFF100000 0x100>;
|
|
clock-frequency = <166666666>;
|
|
interrupts = <25 1>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pctl_uart0>;
|
|
};
|
|
gpioa: gpio@ff140000 {
|
|
compatible = "abilis,tb10x-gpio";
|
|
reg = <0xFF140000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpio = <3>;
|
|
gpio-ranges = <&iomux 0 0>;
|
|
gpio-ranges-group-names = "gpioa";
|
|
};
|