92 lines
2.7 KiB
Plaintext
Executable file
92 lines
2.7 KiB
Plaintext
Executable file
Freescale i.MX General Power Controller
|
|
=======================================
|
|
|
|
The i.MX6 General Power Control (GPC) block contains DVFS load tracking
|
|
counters and Power Gating Control (PGC).
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following:
|
|
- fsl,imx6q-gpc
|
|
- fsl,imx6qp-gpc
|
|
- fsl,imx6sl-gpc
|
|
- fsl,imx6sx-gpc
|
|
- reg: should be register base and length as documented in the
|
|
datasheet
|
|
- interrupts: Should contain one interrupt specifier for the GPC interrupt
|
|
- clocks: Must contain an entry for each entry in clock-names.
|
|
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
|
|
- clock-names: Must include the following entries:
|
|
- ipg
|
|
|
|
The power domains are generic power domain providers as documented in
|
|
Documentation/devicetree/bindings/power/power_domain.txt. They are described as
|
|
subnodes of the power gating controller 'pgc' node of the GPC and should
|
|
contain the following:
|
|
|
|
Required properties:
|
|
- reg: Must contain the DOMAIN_INDEX of this power domain
|
|
The following DOMAIN_INDEX values are valid for i.MX6Q:
|
|
ARM_DOMAIN 0
|
|
PU_DOMAIN 1
|
|
The following additional DOMAIN_INDEX value is valid for i.MX6SL:
|
|
DISPLAY_DOMAIN 2
|
|
The following additional DOMAIN_INDEX value is valid for i.MX6SX:
|
|
PCI_DOMAIN 3
|
|
|
|
- #power-domain-cells: Should be 0
|
|
|
|
Optional properties:
|
|
- clocks: a number of phandles to clocks that need to be enabled during domain
|
|
power-up sequencing to ensure reset propagation into devices located inside
|
|
this power domain
|
|
- power-supply: a phandle to the regulator powering this domain
|
|
|
|
Example:
|
|
|
|
gpc: gpc@20dc000 {
|
|
compatible = "fsl,imx6q-gpc";
|
|
reg = <0x020dc000 0x4000>;
|
|
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX6QDL_CLK_IPG>;
|
|
clock-names = "ipg";
|
|
|
|
pgc {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
power-domain@0 {
|
|
reg = <0>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_pu: power-domain@1 {
|
|
reg = <1>;
|
|
#power-domain-cells = <0>;
|
|
power-supply = <®_pu>;
|
|
clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
|
|
<&clks IMX6QDL_CLK_GPU3D_SHADER>,
|
|
<&clks IMX6QDL_CLK_GPU2D_CORE>,
|
|
<&clks IMX6QDL_CLK_GPU2D_AXI>,
|
|
<&clks IMX6QDL_CLK_OPENVG_AXI>,
|
|
<&clks IMX6QDL_CLK_VPU_AXI>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
Specifying power domain for IP modules
|
|
======================================
|
|
|
|
IP cores belonging to a power domain should contain a 'power-domains' property
|
|
that is a phandle pointing to the power domain the device belongs to.
|
|
|
|
Example of a device that is part of the PU power domain:
|
|
|
|
vpu: vpu@2040000 {
|
|
reg = <0x02040000 0x3c000>;
|
|
/* ... */
|
|
power-domains = <&pd_pu>;
|
|
/* ... */
|
|
};
|