67 lines
1.8 KiB
Plaintext
Executable file
67 lines
1.8 KiB
Plaintext
Executable file
Binding for sbs-manager
|
|
|
|
Required properties:
|
|
- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
|
|
number compatible string might be used in order to take care of vendor
|
|
specific registers.
|
|
- reg: integer, i2c address of the device. Should be <0xa>.
|
|
Optional properties:
|
|
- gpio-controller: Marks the port as GPIO controller.
|
|
See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
|
|
- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
|
|
is used to specify optional parameters:
|
|
See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
|
|
|
|
From OS view the device is basically an i2c-mux used to communicate with up to
|
|
four smart battery devices at address 0xb. The driver actually implements this
|
|
behaviour. So standard i2c-mux nodes can be used to register up to four slave
|
|
batteries. Channels will be numerated starting from 1 to 4.
|
|
|
|
Example:
|
|
|
|
batman@a {
|
|
compatible = "lltc,ltc1760", "sbs,sbs-manager";
|
|
reg = <0x0a>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
battery@b {
|
|
compatible = "ti,bq2060", "sbs,sbs-battery";
|
|
reg = <0x0b>;
|
|
sbs,battery-detect-gpios = <&batman 1 1>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
battery@b {
|
|
compatible = "ti,bq2060", "sbs,sbs-battery";
|
|
reg = <0x0b>;
|
|
sbs,battery-detect-gpios = <&batman 2 1>;
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
battery@b {
|
|
compatible = "ti,bq2060", "sbs,sbs-battery";
|
|
reg = <0x0b>;
|
|
sbs,battery-detect-gpios = <&batman 3 1>;
|
|
};
|
|
};
|
|
};
|