161 lines
4.6 KiB
Plaintext
Executable file
161 lines
4.6 KiB
Plaintext
Executable file
Qualcomm Technologies, Inc. RPMh Regulators
|
|
|
|
rpmh-regulator devices support PMIC regulator management via the Voltage
|
|
Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS
|
|
processor communicates with these hardware blocks via a Resource State
|
|
Coordinator (RSC) using command packets. The VRM allows changing three
|
|
parameters for a given regulator: enable state, output voltage, and operating
|
|
mode. The XOB allows changing only a single parameter for a given regulator:
|
|
its enable state. Despite its name, the XOB is capable of controlling the
|
|
enable state of any PMIC peripheral. It is used for clock buffers, low-voltage
|
|
switches, and LDO/SMPS regulators which have a fixed voltage and mode.
|
|
|
|
=======================
|
|
Required Node Structure
|
|
=======================
|
|
|
|
RPMh regulators must be described in two levels of device nodes. The first
|
|
level describes the PMIC containing the regulators and must reside within an
|
|
RPMh device node. The second level describes each regulator within the PMIC
|
|
which is to be used on the board. Each of these regulators maps to a single
|
|
RPMh resource.
|
|
|
|
The names used for regulator nodes must match those supported by a given PMIC.
|
|
Supported regulator node names:
|
|
PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
|
|
PMI8998: bob
|
|
PM8005: smps1 - smps4
|
|
|
|
========================
|
|
First Level Nodes - PMIC
|
|
========================
|
|
|
|
- compatible
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
|
|
"qcom,pmi8998-rpmh-regulators" or
|
|
"qcom,pm8005-rpmh-regulators".
|
|
|
|
- qcom,pmic-id
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: RPMh resource name suffix used for the regulators found on
|
|
this PMIC. Typical values: "a", "b", "c", "d", "e", "f".
|
|
|
|
- vdd-s1-supply
|
|
- vdd-s2-supply
|
|
- vdd-s3-supply
|
|
- vdd-s4-supply
|
|
Usage: optional (PM8998 and PM8005 only)
|
|
Value type: <phandle>
|
|
Definition: phandle of the parent supply regulator of one or more of the
|
|
regulators for this PMIC.
|
|
|
|
- vdd-s5-supply
|
|
- vdd-s6-supply
|
|
- vdd-s7-supply
|
|
- vdd-s8-supply
|
|
- vdd-s9-supply
|
|
- vdd-s10-supply
|
|
- vdd-s11-supply
|
|
- vdd-s12-supply
|
|
- vdd-s13-supply
|
|
- vdd-l1-l27-supply
|
|
- vdd-l2-l8-l17-supply
|
|
- vdd-l3-l11-supply
|
|
- vdd-l4-l5-supply
|
|
- vdd-l6-supply
|
|
- vdd-l7-l12-l14-l15-supply
|
|
- vdd-l9-supply
|
|
- vdd-l10-l23-l25-supply
|
|
- vdd-l13-l19-l21-supply
|
|
- vdd-l16-l28-supply
|
|
- vdd-l18-l22-supply
|
|
- vdd-l20-l24-supply
|
|
- vdd-l26-supply
|
|
- vin-lvs-1-2-supply
|
|
Usage: optional (PM8998 only)
|
|
Value type: <phandle>
|
|
Definition: phandle of the parent supply regulator of one or more of the
|
|
regulators for this PMIC.
|
|
|
|
- vdd-bob-supply
|
|
Usage: optional (PMI8998 only)
|
|
Value type: <phandle>
|
|
Definition: BOB regulator parent supply phandle
|
|
|
|
===============================
|
|
Second Level Nodes - Regulators
|
|
===============================
|
|
|
|
- qcom,always-wait-for-ack
|
|
Usage: optional
|
|
Value type: <empty>
|
|
Definition: Boolean flag which indicates that the application processor
|
|
must wait for an ACK or a NACK from RPMh for every request
|
|
sent for this regulator including those which are for a
|
|
strictly lower power state.
|
|
|
|
Other properties defined in Documentation/devicetree/bindings/regulator.txt
|
|
may also be used. regulator-initial-mode and regulator-allowed-modes may be
|
|
specified for VRM regulators using mode values from
|
|
include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass
|
|
may be specified for BOB type regulators managed via VRM.
|
|
regulator-allow-set-load may be specified for LDO type regulators managed via
|
|
VRM.
|
|
|
|
========
|
|
Examples
|
|
========
|
|
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
|
|
&apps_rsc {
|
|
pm8998-rpmh-regulators {
|
|
compatible = "qcom,pm8998-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
|
|
|
|
smps2 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
pm8998_s5: smps5 {
|
|
regulator-min-microvolt = <1904000>;
|
|
regulator-max-microvolt = <2040000>;
|
|
};
|
|
|
|
ldo7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allowed-modes =
|
|
<RPMH_REGULATOR_MODE_LPM
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-allow-set-load;
|
|
};
|
|
|
|
lvs1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
pmi8998-rpmh-regulators {
|
|
compatible = "qcom,pmi8998-rpmh-regulators";
|
|
qcom,pmic-id = "b";
|
|
|
|
bob {
|
|
regulator-min-microvolt = <3312000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-allowed-modes =
|
|
<RPMH_REGULATOR_MODE_AUTO
|
|
RPMH_REGULATOR_MODE_HPM>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
};
|