68 lines
1.9 KiB
Plaintext
Executable file
68 lines
1.9 KiB
Plaintext
Executable file
CS43130 DAC
|
|
|
|
Required properties:
|
|
|
|
- compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131",
|
|
"cirrus,cs43198"
|
|
|
|
- reg : the I2C address of the device for I2C
|
|
|
|
- VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply:
|
|
power supplies for the device, as covered in
|
|
Documentation/devicetree/bindings/regulator/regulator.txt.
|
|
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpios : Active low GPIO used to reset the device
|
|
|
|
- cirrus,xtal-ibias:
|
|
When external MCLK is generated by external crystal
|
|
oscillator, CS43130 can be used to provide bias current
|
|
for external crystal. Amount of bias current sent is
|
|
set as:
|
|
1 = 7.5uA
|
|
2 = 12.5uA
|
|
3 = 15uA
|
|
|
|
- cirrus,dc-measure:
|
|
Boolean, define to enable headphone DC impedance measurement.
|
|
|
|
- cirrus,ac-measure:
|
|
Boolean, define to enable headphone AC impedance measurement.
|
|
DC impedance must also be enabled for AC impedance measurement.
|
|
|
|
- cirrus,dc-threshold:
|
|
Define 2 DC impedance thresholds in ohms for HP output control.
|
|
Default values are 50 and 120 Ohms.
|
|
|
|
- cirrus,ac-freq:
|
|
Define the frequencies at which to measure HP AC impedance.
|
|
Only used if "cirrus,dc-measure" is defined.
|
|
Exactly 10 frequencies must be defined.
|
|
If this properties is undefined, by default,
|
|
following frequencies are used:
|
|
<24 43 93 200 431 928 2000 4309 9283 20000>
|
|
The above frequencies are logarithmically equally spaced.
|
|
Log base is 10.
|
|
|
|
Example:
|
|
|
|
cs43130: audio-codec@30 {
|
|
compatible = "cirrus,cs43130";
|
|
reg = <0x30>;
|
|
reset-gpios = <&axi_gpio 54 0>;
|
|
VA-supply = <&dummy_vreg>;
|
|
VP-supply = <&dummy_vreg>;
|
|
VL-supply = <&dummy_vreg>;
|
|
VCP-supply = <&dummy_vreg>;
|
|
VD-supply = <&dummy_vreg>;
|
|
cirrus,xtal-ibias = <2>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <55 8>;
|
|
cirrus,dc-measure;
|
|
cirrus,ac-measure;
|
|
cirrus,dc-threshold = /bits/ 16 <20 100>;
|
|
cirrus,ac-freq = /bits/ 16 <24 43 93 200 431 928 2000 4309 9283 20000>;
|
|
};
|