38 lines
1.4 KiB
Plaintext
Executable file
38 lines
1.4 KiB
Plaintext
Executable file
* Device tree bindings for Texas Instruments DaVinci timer
|
|
|
|
This document provides bindings for the 64-bit timer in the DaVinci
|
|
architecture devices. The timer can be configured as a general-purpose 64-bit
|
|
timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
|
|
timers, each half can operate in conjunction (chain mode) or independently
|
|
(unchained mode) of each other.
|
|
|
|
The timer is a free running up-counter and can generate interrupts when the
|
|
counter reaches preset counter values.
|
|
|
|
Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
|
|
watchdog timers.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ti,da830-timer".
|
|
- reg : specifies base physical address and count of the registers.
|
|
- interrupts : interrupts generated by the timer.
|
|
- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
|
|
"cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
|
|
"cmpint7" ("cmpintX" may be omitted if not present in the
|
|
hardware).
|
|
- clocks : the clock feeding the timer clock.
|
|
|
|
Example:
|
|
|
|
clocksource: timer@20000 {
|
|
compatible = "ti,da830-timer";
|
|
reg = <0x20000 0x1000>;
|
|
interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
|
|
<80>, <81>;
|
|
interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
|
|
"cmpint2", "cmpint3", "cmpint4", "cmpint5",
|
|
"cmpint6", "cmpint7";
|
|
clocks = <&pll0_auxclk>;
|
|
};
|