103 lines
3.3 KiB
Plaintext
Executable file
103 lines
3.3 KiB
Plaintext
Executable file
Generic USB Device Properties
|
|
|
|
Usually, we only use device tree for hard wired USB device.
|
|
The reference binding doc is from:
|
|
http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
|
|
|
|
Four types of device-tree nodes are defined: "host-controller nodes"
|
|
representing USB host controllers, "device nodes" representing USB devices,
|
|
"interface nodes" representing USB interfaces and "combined nodes"
|
|
representing simple USB devices.
|
|
|
|
A combined node shall be used instead of a device node and an interface node
|
|
for devices of class 0 or 9 (hub) with a single configuration and a single
|
|
interface.
|
|
|
|
A "hub node" is a combined node or an interface node that represents a USB
|
|
hub.
|
|
|
|
|
|
Required properties for device nodes:
|
|
- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
|
|
The textual representation of VID and PID shall be in lower case hexadecimal
|
|
with leading zeroes suppressed. The other compatible strings from the above
|
|
standard binding could also be used, but a device adhering to this binding
|
|
may leave out all except for "usbVID,PID".
|
|
- reg: the number of the USB hub port or the USB host-controller port to which
|
|
this device is attached. The range is 1-255.
|
|
|
|
|
|
Required properties for device nodes with interface nodes:
|
|
- #address-cells: shall be 2
|
|
- #size-cells: shall be 0
|
|
|
|
|
|
Required properties for interface nodes:
|
|
- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
|
|
the product id, CN is the configuration value and IN is the interface
|
|
number. The textual representation of VID, PID, CN and IN shall be in lower
|
|
case hexadecimal with leading zeroes suppressed. The other compatible
|
|
strings from the above standard binding could also be used, but a device
|
|
adhering to this binding may leave out all except for
|
|
"usbifVID,PID.configCN.IN".
|
|
- reg: the interface number and configuration value
|
|
|
|
The configuration component is not included in the textual representation of
|
|
an interface-node unit address for configuration 1.
|
|
|
|
|
|
Required properties for combined nodes:
|
|
- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
|
|
The textual representation of VID and PID shall be in lower case hexadecimal
|
|
with leading zeroes suppressed. The other compatible strings from the above
|
|
standard binding could also be used, but a device adhering to this binding
|
|
may leave out all except for "usbVID,PID".
|
|
- reg: the number of the USB hub port or the USB host-controller port to which
|
|
this device is attached. The range is 1-255.
|
|
|
|
|
|
Required properties for hub nodes with device nodes:
|
|
- #address-cells: shall be 1
|
|
- #size-cells: shall be 0
|
|
|
|
|
|
Required properties for host-controller nodes with device nodes:
|
|
- #address-cells: shall be 1
|
|
- #size-cells: shall be 0
|
|
|
|
|
|
Example:
|
|
|
|
&usb1 { /* host controller */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hub@1 { /* hub connected to port 1 */
|
|
compatible = "usb5e3,608";
|
|
reg = <1>;
|
|
};
|
|
|
|
device@2 { /* device connected to port 2 */
|
|
compatible = "usb123,4567";
|
|
reg = <2>;
|
|
};
|
|
|
|
device@3 { /* device connected to port 3 */
|
|
compatible = "usb123,abcd";
|
|
reg = <3>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
interface@0 { /* interface 0 of configuration 1 */
|
|
compatible = "usbif123,abcd.config1.0";
|
|
reg = <0 1>;
|
|
};
|
|
|
|
interface@0,2 { /* interface 0 of configuration 2 */
|
|
compatible = "usbif123,abcd.config2.0";
|
|
reg = <0 2>;
|
|
};
|
|
};
|
|
};
|