615 lines
16 KiB
Plaintext
Executable file
615 lines
16 KiB
Plaintext
Executable file
/*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2015-2017 Broadcom. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Broadcom nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
compatible = "brcm,stingray";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER0_L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER0_L2>;
|
|
};
|
|
|
|
cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER1_L2>;
|
|
};
|
|
|
|
cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x101>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER1_L2>;
|
|
};
|
|
|
|
cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x200>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER2_L2>;
|
|
};
|
|
|
|
cpu@201 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x201>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER2_L2>;
|
|
};
|
|
|
|
cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x300>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER3_L2>;
|
|
};
|
|
|
|
cpu@301 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72", "arm,armv8";
|
|
reg = <0x0 0x301>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&CLUSTER3_L2>;
|
|
};
|
|
|
|
CLUSTER0_L2: l2-cache@0 {
|
|
compatible = "cache";
|
|
};
|
|
|
|
CLUSTER1_L2: l2-cache@100 {
|
|
compatible = "cache";
|
|
};
|
|
|
|
CLUSTER2_L2: l2-cache@200 {
|
|
compatible = "cache";
|
|
};
|
|
|
|
CLUSTER3_L2: l2-cache@300 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
memory: memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x80000000 0 0x40000000>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
mhb: syscon@60401000 {
|
|
compatible = "brcm,sr-mhb", "syscon";
|
|
reg = <0 0x60401000 0 0x38c>;
|
|
};
|
|
|
|
scr {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x61000000 0x05000000>;
|
|
|
|
ccn: ccn@0 {
|
|
compatible = "arm,ccn-502";
|
|
reg = <0x00000000 0x900000>;
|
|
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gic: interrupt-controller@2c00000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-controller;
|
|
reg = <0x02c00000 0x010000>, /* GICD */
|
|
<0x02e00000 0x600000>; /* GICR */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
gic_its: gic-its@63c20000 {
|
|
compatible = "arm,gic-v3-its";
|
|
msi-controller;
|
|
#msi-cells = <1>;
|
|
reg = <0x02c20000 0x10000>;
|
|
};
|
|
};
|
|
|
|
smmu: mmu@3000000 {
|
|
compatible = "arm,mmu-500";
|
|
reg = <0x03000000 0x80000>;
|
|
#global-interrupts = <1>;
|
|
interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
|
|
#iommu-cells = <2>;
|
|
};
|
|
};
|
|
|
|
crmu: crmu {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x66400000 0x100000>;
|
|
|
|
#include "stingray-clock.dtsi"
|
|
|
|
otp: otp@1c400 {
|
|
compatible = "brcm,ocotp-v2";
|
|
reg = <0x0001c400 0x68>;
|
|
brcm,ocotp-size = <2048>;
|
|
status = "okay";
|
|
};
|
|
|
|
cdru: syscon@1d000 {
|
|
compatible = "brcm,sr-cdru", "syscon";
|
|
reg = <0x0001d000 0x400>;
|
|
};
|
|
|
|
gpio_crmu: gpio@24800 {
|
|
compatible = "brcm,iproc-gpio";
|
|
reg = <0x00024800 0x4c>;
|
|
ngpios = <6>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
#include "stingray-fs4.dtsi"
|
|
#include "stingray-sata.dtsi"
|
|
#include "stingray-pcie.dtsi"
|
|
|
|
hsls {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x68900000 0x17700000>;
|
|
|
|
#include "stingray-pinctrl.dtsi"
|
|
|
|
mdio_mux_iproc: mdio-mux@20000 {
|
|
compatible = "brcm,mdio-mux-iproc";
|
|
reg = <0x00020000 0x250>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio@0 { /* PCIe serdes */
|
|
reg = <0x0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio@2 { /* SATA */
|
|
reg = <0x2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio@3 { /* USB */
|
|
reg = <0x3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mdio@10 { /* RGMII */
|
|
reg = <0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
pwm: pwm@10000 {
|
|
compatible = "brcm,iproc-pwm";
|
|
reg = <0x00010000 0x1000>;
|
|
clocks = <&crmu_ref25m>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer0: timer@30000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00030000 0x1000>;
|
|
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer1: timer@40000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00040000 0x1000>;
|
|
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
};
|
|
|
|
timer2: timer@50000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00050000 0x1000>;
|
|
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer3: timer@60000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00060000 0x1000>;
|
|
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer4: timer@70000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00070000 0x1000>;
|
|
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer5: timer@80000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00080000 0x1000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer6: timer@90000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x00090000 0x1000>;
|
|
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer7: timer@a0000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x000a0000 0x1000>;
|
|
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>,
|
|
<&hsls_25m_div2_clk>,
|
|
<&hsls_div4_clk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@b0000 {
|
|
compatible = "brcm,iproc-i2c";
|
|
reg = <0x000b0000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt0: watchdog@c0000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x000c0000 0x1000>;
|
|
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
timeout-sec = <60>;
|
|
};
|
|
|
|
gpio_hsls: gpio@d0000 {
|
|
compatible = "brcm,iproc-gpio";
|
|
reg = <0x000d0000 0x864>;
|
|
ngpios = <151>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-ranges = <&pinmux 0 0 16>,
|
|
<&pinmux 16 71 2>,
|
|
<&pinmux 18 131 8>,
|
|
<&pinmux 26 83 6>,
|
|
<&pinmux 32 123 4>,
|
|
<&pinmux 36 43 24>,
|
|
<&pinmux 60 89 2>,
|
|
<&pinmux 62 73 4>,
|
|
<&pinmux 66 95 28>,
|
|
<&pinmux 94 127 4>,
|
|
<&pinmux 98 139 10>,
|
|
<&pinmux 108 16 27>,
|
|
<&pinmux 135 77 6>,
|
|
<&pinmux 141 67 4>,
|
|
<&pinmux 145 149 6>;
|
|
};
|
|
|
|
i2c1: i2c@e0000 {
|
|
compatible = "brcm,iproc-i2c";
|
|
reg = <0x000e0000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: uart@100000 {
|
|
device_type = "serial";
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x00100000 0x1000>;
|
|
reg-shift = <2>;
|
|
clock-frequency = <25000000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: uart@110000 {
|
|
device_type = "serial";
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x00110000 0x1000>;
|
|
reg-shift = <2>;
|
|
clock-frequency = <25000000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: uart@120000 {
|
|
device_type = "serial";
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x00120000 0x1000>;
|
|
reg-shift = <2>;
|
|
clock-frequency = <25000000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: uart@130000 {
|
|
device_type = "serial";
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x00130000 0x1000>;
|
|
reg-shift = <2>;
|
|
clock-frequency = <25000000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssp0: spi@180000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x00180000 0x1000>;
|
|
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
|
|
clock-names = "spiclk", "apb_pclk";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssp1: spi@190000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x00190000 0x1000>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
|
|
clock-names = "spiclk", "apb_pclk";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hwrng: hwrng@220000 {
|
|
compatible = "brcm,iproc-rng200";
|
|
reg = <0x00220000 0x28>;
|
|
};
|
|
|
|
dma0: dma@310000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x00310000 0x1000>;
|
|
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
clocks = <&hsls_div2_clk>;
|
|
clock-names = "apb_pclk";
|
|
iommus = <&smmu 0x6000 0x0000>;
|
|
};
|
|
|
|
enet: ethernet@340000{
|
|
compatible = "brcm,amac";
|
|
reg = <0x00340000 0x1000>;
|
|
reg-names = "amac_base";
|
|
dma-coherent;
|
|
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
|
|
status= "disabled";
|
|
};
|
|
|
|
nand: nand@360000 {
|
|
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
|
|
reg = <0x00360000 0x600>,
|
|
<0x0050a408 0x600>,
|
|
<0x00360f00 0x20>;
|
|
reg-names = "nand", "iproc-idm", "iproc-ext";
|
|
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
brcm,nand-has-wp;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio0: sdhci@3f1000 {
|
|
compatible = "brcm,sdhci-iproc";
|
|
reg = <0x003f1000 0x100>;
|
|
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
|
|
bus-width = <8>;
|
|
clocks = <&sdio0_clk>;
|
|
iommus = <&smmu 0x6002 0x0000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio1: sdhci@3f2000 {
|
|
compatible = "brcm,sdhci-iproc";
|
|
reg = <0x003f2000 0x100>;
|
|
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
|
|
bus-width = <8>;
|
|
clocks = <&sdio1_clk>;
|
|
iommus = <&smmu 0x6003 0x0000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|