623 lines
16 KiB
Plaintext
Executable file
623 lines
16 KiB
Plaintext
Executable file
/*
|
|
* DTS File for HiSilicon Hi3798cv200 SoC.
|
|
*
|
|
* Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
|
|
*
|
|
* Released under the GPLv2 only.
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <dt-bindings/clock/histb-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/reset/ti-syscon.h>
|
|
|
|
/ {
|
|
compatible = "hisilicon,hi3798cv200";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <0x0 0x2>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <0x0 0x3>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@f1001000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
|
|
<0x0 0xf1002000 0x0 0x100>; /* GICC */
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
soc: soc@f0000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0xf0000000 0x10000000>;
|
|
|
|
crg: clock-reset-controller@8a22000 {
|
|
compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
|
|
reg = <0x8a22000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <2>;
|
|
|
|
gmacphyrst: reset-controller {
|
|
compatible = "ti,syscon-reset";
|
|
#reset-cells = <1>;
|
|
ti,reset-bits =
|
|
<0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
|
|
DEASSERT_SET|STATUS_NONE)>,
|
|
<0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
|
|
DEASSERT_SET|STATUS_NONE)>;
|
|
};
|
|
};
|
|
|
|
sysctrl: system-controller@8000000 {
|
|
compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
|
|
reg = <0x8000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <2>;
|
|
};
|
|
|
|
perictrl: peripheral-controller@8a20000 {
|
|
compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
|
|
"simple-mfd";
|
|
reg = <0x8a20000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8a20000 0x1000>;
|
|
|
|
usb2_phy1: usb2-phy@120 {
|
|
compatible = "hisilicon,hi3798cv200-usb2-phy";
|
|
reg = <0x120 0x4>;
|
|
clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
|
|
resets = <&crg 0xbc 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb2_phy1_port0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 8>;
|
|
};
|
|
|
|
usb2_phy1_port1: phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 9>;
|
|
};
|
|
};
|
|
|
|
usb2_phy2: usb2-phy@124 {
|
|
compatible = "hisilicon,hi3798cv200-usb2-phy";
|
|
reg = <0x124 0x4>;
|
|
clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
|
|
resets = <&crg 0xbc 6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb2_phy2_port0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 10>;
|
|
};
|
|
};
|
|
|
|
combphy0: phy@850 {
|
|
compatible = "hisilicon,hi3798cv200-combphy";
|
|
reg = <0x850 0x8>;
|
|
#phy-cells = <1>;
|
|
clocks = <&crg HISTB_COMBPHY0_CLK>;
|
|
resets = <&crg 0x188 4>;
|
|
assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
|
|
assigned-clock-rates = <100000000>;
|
|
hisilicon,fixed-mode = <PHY_TYPE_USB3>;
|
|
};
|
|
|
|
combphy1: phy@858 {
|
|
compatible = "hisilicon,hi3798cv200-combphy";
|
|
reg = <0x858 0x8>;
|
|
#phy-cells = <1>;
|
|
clocks = <&crg HISTB_COMBPHY1_CLK>;
|
|
resets = <&crg 0x188 12>;
|
|
assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
|
|
assigned-clock-rates = <100000000>;
|
|
hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
|
|
};
|
|
};
|
|
|
|
pmx0: pinconf@8a21000 {
|
|
compatible = "pinconf-single";
|
|
reg = <0x8a21000 0x180>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <7>;
|
|
pinctrl-single,gpio-range = <
|
|
&range 0 8 2 /* GPIO 0 */
|
|
&range 8 1 0 /* GPIO 1 */
|
|
&range 9 4 2
|
|
&range 13 1 0
|
|
&range 14 1 1
|
|
&range 15 1 0
|
|
&range 16 5 0 /* GPIO 2 */
|
|
&range 21 3 1
|
|
&range 24 4 1 /* GPIO 3 */
|
|
&range 28 2 2
|
|
&range 86 1 1
|
|
&range 87 1 0
|
|
&range 30 4 2 /* GPIO 4 */
|
|
&range 34 3 0
|
|
&range 37 1 2
|
|
&range 38 3 2 /* GPIO 6 */
|
|
&range 41 5 0
|
|
&range 46 8 1 /* GPIO 7 */
|
|
&range 54 8 1 /* GPIO 8 */
|
|
&range 64 7 1 /* GPIO 9 */
|
|
&range 71 1 0
|
|
&range 72 6 1 /* GPIO 10 */
|
|
&range 78 1 0
|
|
&range 79 1 1
|
|
&range 80 6 1 /* GPIO 11 */
|
|
&range 70 2 1
|
|
&range 88 8 0 /* GPIO 12 */
|
|
>;
|
|
|
|
range: gpio-range {
|
|
#pinctrl-single,gpio-range-cells = <3>;
|
|
};
|
|
};
|
|
|
|
uart0: serial@8b00000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x8b00000 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sysctrl HISTB_UART0_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@8b02000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x8b02000 0x1000>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_UART2_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@8b10000 {
|
|
compatible = "hisilicon,hix5hd2-i2c";
|
|
reg = <0x8b10000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&crg HISTB_I2C0_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@8b11000 {
|
|
compatible = "hisilicon,hix5hd2-i2c";
|
|
reg = <0x8b11000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&crg HISTB_I2C1_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@8b12000 {
|
|
compatible = "hisilicon,hix5hd2-i2c";
|
|
reg = <0x8b12000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&crg HISTB_I2C2_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@8b13000 {
|
|
compatible = "hisilicon,hix5hd2-i2c";
|
|
reg = <0x8b13000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&crg HISTB_I2C3_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@8b14000 {
|
|
compatible = "hisilicon,hix5hd2-i2c";
|
|
reg = <0x8b14000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&crg HISTB_I2C4_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@8b1a000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x8b1a000 0x1000>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-cs = <1>;
|
|
cs-gpios = <&gpio7 1 0>;
|
|
clocks = <&crg HISTB_SPI0_CLK>;
|
|
clock-names = "apb_pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sd0: mmc@9820000 {
|
|
compatible = "snps,dw-mshc";
|
|
reg = <0x9820000 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_SDIO0_CIU_CLK>,
|
|
<&crg HISTB_SDIO0_BIU_CLK>;
|
|
clock-names = "ciu", "biu";
|
|
resets = <&crg 0x9c 4>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: mmc@9830000 {
|
|
compatible = "hisilicon,hi3798cv200-dw-mshc";
|
|
reg = <0x9830000 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_MMC_CIU_CLK>,
|
|
<&crg HISTB_MMC_BIU_CLK>,
|
|
<&crg HISTB_MMC_SAMPLE_CLK>,
|
|
<&crg HISTB_MMC_DRV_CLK>;
|
|
clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
|
|
resets = <&crg 0xa0 4>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@8b20000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b20000 0x1000>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 0 8>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@8b21000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b21000 0x1000>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <
|
|
&pmx0 0 8 1
|
|
&pmx0 1 9 4
|
|
&pmx0 5 13 1
|
|
&pmx0 6 14 1
|
|
&pmx0 7 15 1
|
|
>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio2: gpio@8b22000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b22000 0x1000>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio3: gpio@8b23000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b23000 0x1000>;
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <
|
|
&pmx0 0 24 4
|
|
&pmx0 4 28 2
|
|
&pmx0 6 86 1
|
|
&pmx0 7 87 1
|
|
>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio4: gpio@8b24000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b24000 0x1000>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio5: gpio@8004000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8004000 0x1000>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio6: gpio@8b26000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b26000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio7: gpio@8b27000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b27000 0x1000>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 46 8>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio8: gpio@8b28000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b28000 0x1000>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 54 8>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio9: gpio@8b29000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b29000 0x1000>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio10: gpio@8b2a000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b2a000 0x1000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio11: gpio@8b2b000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b2b000 0x1000>;
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio12: gpio@8b2c000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x8b2c000 0x1000>;
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&pmx0 0 88 8>;
|
|
clocks = <&crg HISTB_APB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac0: ethernet@9840000 {
|
|
compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
|
|
reg = <0x9840000 0x1000>,
|
|
<0x984300c 0x4>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_ETH0_MAC_CLK>,
|
|
<&crg HISTB_ETH0_MACIF_CLK>;
|
|
clock-names = "mac_core", "mac_ifc";
|
|
resets = <&crg 0xcc 8>,
|
|
<&crg 0xcc 10>,
|
|
<&gmacphyrst 0>;
|
|
reset-names = "mac_core", "mac_ifc", "phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac1: ethernet@9841000 {
|
|
compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
|
|
reg = <0x9841000 0x1000>,
|
|
<0x9843010 0x4>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_ETH1_MAC_CLK>,
|
|
<&crg HISTB_ETH1_MACIF_CLK>;
|
|
clock-names = "mac_core", "mac_ifc";
|
|
resets = <&crg 0xcc 9>,
|
|
<&crg 0xcc 11>,
|
|
<&gmacphyrst 1>;
|
|
reset-names = "mac_core", "mac_ifc", "phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
ir: ir@8001000 {
|
|
compatible = "hisilicon,hix5hd2-ir";
|
|
reg = <0x8001000 0x1000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sysctrl HISTB_IR_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie: pcie@9860000 {
|
|
compatible = "hisilicon,hi3798cv200-pcie";
|
|
reg = <0x9860000 0x1000>,
|
|
<0x0 0x2000>,
|
|
<0x2000000 0x01000000>;
|
|
reg-names = "control", "rc-dbi", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
bus-range = <0 15>;
|
|
num-lanes = <1>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
|
|
0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
|
|
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_PCIE_AUX_CLK>,
|
|
<&crg HISTB_PCIE_PIPE_CLK>,
|
|
<&crg HISTB_PCIE_SYS_CLK>,
|
|
<&crg HISTB_PCIE_BUS_CLK>;
|
|
clock-names = "aux", "pipe", "sys", "bus";
|
|
resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
|
|
reset-names = "soft", "sys", "bus";
|
|
phys = <&combphy1 PHY_TYPE_PCIE>;
|
|
phy-names = "phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: ohci@9880000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x9880000 0x10000>;
|
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_USB2_BUS_CLK>,
|
|
<&crg HISTB_USB2_12M_CLK>,
|
|
<&crg HISTB_USB2_48M_CLK>;
|
|
clock-names = "bus", "clk12", "clk48";
|
|
resets = <&crg 0xb8 12>;
|
|
reset-names = "bus";
|
|
phys = <&usb2_phy1_port0>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: ehci@9890000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x9890000 0x10000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg HISTB_USB2_BUS_CLK>,
|
|
<&crg HISTB_USB2_PHY_CLK>,
|
|
<&crg HISTB_USB2_UTMI_CLK>;
|
|
clock-names = "bus", "phy", "utmi";
|
|
resets = <&crg 0xb8 12>,
|
|
<&crg 0xb8 16>,
|
|
<&crg 0xb8 13>;
|
|
reset-names = "bus", "phy", "utmi";
|
|
phys = <&usb2_phy1_port0>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|