272 lines
6.5 KiB
C
Executable file
272 lines
6.5 KiB
C
Executable file
/*
|
|
* pata_cmd640.c - CMD640 PCI PATA for new ATA layer
|
|
* (C) 2007 Red Hat Inc
|
|
*
|
|
* Based upon
|
|
* linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
|
|
*
|
|
* Copyright (C) 1995-1996 Linus Torvalds & authors (see driver)
|
|
*
|
|
* This drives only the PCI version of the controller. If you have a
|
|
* VLB one then we have enough docs to support it but you can write
|
|
* your own code.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gfp.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_cmd640"
|
|
#define DRV_VERSION "0.0.5"
|
|
|
|
struct cmd640_reg {
|
|
int last;
|
|
u8 reg58[ATA_MAX_DEVICES];
|
|
};
|
|
|
|
enum {
|
|
CFR = 0x50,
|
|
CNTRL = 0x51,
|
|
CMDTIM = 0x52,
|
|
ARTIM0 = 0x53,
|
|
DRWTIM0 = 0x54,
|
|
ARTIM23 = 0x57,
|
|
DRWTIM23 = 0x58,
|
|
BRST = 0x59
|
|
};
|
|
|
|
/**
|
|
* cmd640_set_piomode - set initial PIO mode data
|
|
* @ap: ATA port
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup.
|
|
*/
|
|
|
|
static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct cmd640_reg *timing = ap->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_timing t;
|
|
const unsigned long T = 1000000 / 33;
|
|
const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
|
|
u8 reg;
|
|
int arttim = ARTIM0 + 2 * adev->devno;
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
|
|
if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
|
|
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
|
|
return;
|
|
}
|
|
|
|
/* The second channel has shared timings and the setup timing is
|
|
messy to switch to merge it for worst case */
|
|
if (ap->port_no && pair) {
|
|
struct ata_timing p;
|
|
ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
|
|
ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
|
|
}
|
|
|
|
/* Make the timings fit */
|
|
if (t.recover > 16) {
|
|
t.active += t.recover - 16;
|
|
t.recover = 16;
|
|
}
|
|
if (t.active > 16)
|
|
t.active = 16;
|
|
|
|
/* Now convert the clocks into values we can actually stuff into
|
|
the chip */
|
|
|
|
if (t.recover > 1)
|
|
t.recover--; /* 640B only */
|
|
else
|
|
t.recover = 15;
|
|
|
|
if (t.setup > 4)
|
|
t.setup = 0xC0;
|
|
else
|
|
t.setup = setup_data[t.setup];
|
|
|
|
if (ap->port_no == 0) {
|
|
t.active &= 0x0F; /* 0 = 16 */
|
|
|
|
/* Load setup timing */
|
|
pci_read_config_byte(pdev, arttim, ®);
|
|
reg &= 0x3F;
|
|
reg |= t.setup;
|
|
pci_write_config_byte(pdev, arttim, reg);
|
|
|
|
/* Load active/recovery */
|
|
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
|
|
} else {
|
|
/* Save the shared timings for channel, they will be loaded
|
|
by qc_issue. Reloading the setup time is expensive so we
|
|
keep a merged one loaded */
|
|
pci_read_config_byte(pdev, ARTIM23, ®);
|
|
reg &= 0x3F;
|
|
reg |= t.setup;
|
|
pci_write_config_byte(pdev, ARTIM23, reg);
|
|
timing->reg58[adev->devno] = (t.active << 4) | t.recover;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* cmd640_qc_issue - command preparation hook
|
|
* @qc: Command to be issued
|
|
*
|
|
* Channel 1 has shared timings. We must reprogram the
|
|
* clock each drive 2/3 switch we do.
|
|
*/
|
|
|
|
static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct cmd640_reg *timing = ap->private_data;
|
|
|
|
if (ap->port_no != 0 && adev->devno != timing->last) {
|
|
pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
|
|
timing->last = adev->devno;
|
|
}
|
|
return ata_sff_qc_issue(qc);
|
|
}
|
|
|
|
/**
|
|
* cmd640_port_start - port setup
|
|
* @ap: ATA port being set up
|
|
*
|
|
* The CMD640 needs to maintain private data structures so we
|
|
* allocate space here.
|
|
*/
|
|
|
|
static int cmd640_port_start(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct cmd640_reg *timing;
|
|
|
|
timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
|
|
if (timing == NULL)
|
|
return -ENOMEM;
|
|
timing->last = -1; /* Force a load */
|
|
ap->private_data = timing;
|
|
return 0;
|
|
}
|
|
|
|
static bool cmd640_sff_irq_check(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int irq_reg = ap->port_no ? ARTIM23 : CFR;
|
|
u8 irq_stat, irq_mask = ap->port_no ? 0x10 : 0x04;
|
|
|
|
pci_read_config_byte(pdev, irq_reg, &irq_stat);
|
|
|
|
return irq_stat & irq_mask;
|
|
}
|
|
|
|
static struct scsi_host_template cmd640_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations cmd640_port_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
/* In theory xfer_noirq is not needed once we kill the prefetcher */
|
|
.sff_data_xfer = ata_sff_data_xfer32,
|
|
.sff_irq_check = cmd640_sff_irq_check,
|
|
.qc_issue = cmd640_qc_issue,
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = cmd640_set_piomode,
|
|
.port_start = cmd640_port_start,
|
|
};
|
|
|
|
static void cmd640_hardware_init(struct pci_dev *pdev)
|
|
{
|
|
u8 ctrl;
|
|
|
|
/* CMD640 detected, commiserations */
|
|
pci_write_config_byte(pdev, 0x5B, 0x00);
|
|
/* PIO0 command cycles */
|
|
pci_write_config_byte(pdev, CMDTIM, 0);
|
|
/* 512 byte bursts (sector) */
|
|
pci_write_config_byte(pdev, BRST, 0x40);
|
|
/*
|
|
* A reporter a long time ago
|
|
* Had problems with the data fifo
|
|
* So don't run the risk
|
|
* Of putting crap on the disk
|
|
* For its better just to go slow
|
|
*/
|
|
/* Do channel 0 */
|
|
pci_read_config_byte(pdev, CNTRL, &ctrl);
|
|
pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
|
|
/* Ditto for channel 1 */
|
|
pci_read_config_byte(pdev, ARTIM23, &ctrl);
|
|
ctrl |= 0x0C;
|
|
pci_write_config_byte(pdev, ARTIM23, ctrl);
|
|
}
|
|
|
|
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.port_ops = &cmd640_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
int rc;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
cmd640_hardware_init(pdev);
|
|
|
|
return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int cmd640_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
cmd640_hardware_init(pdev);
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id cmd640[] = {
|
|
{ PCI_VDEVICE(CMD, 0x640), 0 },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cmd640_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cmd640,
|
|
.probe = cmd640_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = cmd640_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(cmd640_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cmd640);
|
|
MODULE_VERSION(DRV_VERSION);
|