c05564c4d8
Android 13
3129 lines
84 KiB
C
Executable file
3129 lines
84 KiB
C
Executable file
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2020 MediaTek Inc.
|
|
* Author: Owen Chen <owen.chen@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "clk-mt6765-pg.h"
|
|
|
|
#include <dt-bindings/clock/mt6765-clk.h>
|
|
|
|
/*#define TOPAXI_PROTECT_LOCK*/
|
|
/* need to ignore for bring up */
|
|
#ifdef CONFIG_FPGA_EARLY_PORTING
|
|
#define IGNORE_MTCMOS_CHECK
|
|
#endif
|
|
#if !defined(MT_CCF_DEBUG) \
|
|
|| !defined(CLK_DEBUG) || !defined(DUMMY_REG_TEST)
|
|
#define MT_CCF_DEBUG 0
|
|
#define CONTROL_LIMIT 0
|
|
#define DUMMY_REG_TEST 0
|
|
#define SUBSYS_IF_ON 0
|
|
#define MTCMOS_FORCE_OFF 0
|
|
#endif
|
|
|
|
#define CHECK_PWR_ST 1
|
|
|
|
#define CONN_TIMEOUT_RECOVERY 5
|
|
#define CONN_TIMEOUT_STEP1 4
|
|
|
|
#ifndef GENMASK
|
|
#define GENMASK(h, l) (((U32_C(1) << ((h) - (l) + 1)) - 1) << (l))
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM64
|
|
#define IOMEM(a) ((void __force __iomem *)((a)))
|
|
#endif
|
|
|
|
#define mt_reg_sync_writel(v, a) \
|
|
do { \
|
|
__raw_writel((v), IOMEM(a)); \
|
|
/* sync up */ \
|
|
mb(); } \
|
|
while (0)
|
|
#define spm_read(addr) __raw_readl(IOMEM(addr))
|
|
#define spm_write(addr, val) mt_reg_sync_writel(val, addr)
|
|
|
|
#define clk_writel(addr, val) \
|
|
mt_reg_sync_writel(val, addr)
|
|
|
|
#define clk_readl(addr) __raw_readl(IOMEM(addr))
|
|
|
|
/*
|
|
* MTCMOS
|
|
*/
|
|
|
|
#define STA_POWER_DOWN 0
|
|
#define STA_POWER_ON 1
|
|
#define SUBSYS_PWR_DOWN 0
|
|
#define SUBSYS_PWR_ON 1
|
|
|
|
struct subsys;
|
|
|
|
struct subsys_ops {
|
|
int (*prepare)(struct subsys *sys);
|
|
int (*unprepare)(struct subsys *sys);
|
|
int (*enable)(struct subsys *sys);
|
|
int (*disable)(struct subsys *sys);
|
|
int (*get_state)(struct subsys *sys);
|
|
};
|
|
|
|
struct subsys {
|
|
const char *name;
|
|
uint32_t sta_mask;
|
|
void __iomem *ctl_addr;
|
|
uint32_t sram_pdn_bits;
|
|
uint32_t sram_pdn_ack_bits;
|
|
uint32_t bus_prot_mask;
|
|
struct subsys_ops *ops;
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(clk_ops_lock);
|
|
static DEFINE_SPINLOCK(mtcmos_ops_lock);
|
|
|
|
#define mtk_clk_lock(flags) spin_lock_irqsave(&clk_ops_lock, flags)
|
|
#define mtk_clk_unlock(flags) \
|
|
spin_unlock_irqrestore(&clk_ops_lock, flags)
|
|
#define mtk_mtcmos_lock(flags) spin_lock_irqsave(&mtcmos_ops_lock, flags)
|
|
#define mtk_mtcmos_unlock(flags) \
|
|
spin_unlock_irqrestore(&mtcmos_ops_lock, flags)
|
|
|
|
/*static struct subsys_ops general_sys_ops;*/
|
|
|
|
static struct subsys_ops MD1_sys_ops;
|
|
static struct subsys_ops CONN_sys_ops;
|
|
static struct subsys_ops DPY_sys_ops;
|
|
static struct subsys_ops DIS_sys_ops;
|
|
static struct subsys_ops MFG_sys_ops;
|
|
static struct subsys_ops ISP_sys_ops;
|
|
static struct subsys_ops IFR_sys_ops;
|
|
static struct subsys_ops MFG_CORE0_sys_ops;
|
|
static struct subsys_ops MFG_ASYNC_sys_ops;
|
|
static struct subsys_ops CAM_sys_ops;
|
|
static struct subsys_ops VCODEC_sys_ops;
|
|
|
|
static void __iomem *infracfg_base;/* infracfg_ao */
|
|
static void __iomem *spm_base;/* spm */
|
|
static void __iomem *infra_base;/* infra */
|
|
static void __iomem *smi_common_base;/* smi_common */
|
|
static void __iomem *conn_base; /* connsys*/
|
|
static void __iomem *conn_mcu_base; /* connsys MCU */
|
|
|
|
#define INFRACFG_REG(offset) (infracfg_base + offset)
|
|
#define SPM_REG(offset) (spm_base + offset)
|
|
#define INFRA_REG(offset) (infra_base + offset)
|
|
#define SMI_COMMON_REG(offset) (smi_common_base + offset)
|
|
#define CONN_HIF_REG(offset) (conn_base + offset)
|
|
#define CONN_MCU_REG(offset) (conn_mcu_base + offset)
|
|
|
|
/* Define MTCMOS power control */
|
|
#define PWR_RST_B (0x1 << 0)
|
|
#define PWR_ISO (0x1 << 1)
|
|
#define PWR_ON (0x1 << 2)
|
|
#define PWR_ON_2ND (0x1 << 3)
|
|
#define PWR_CLK_DIS (0x1 << 4)
|
|
#define SRAM_CKISO (0x1 << 5)
|
|
#define SRAM_ISOINT_B (0x1 << 6)
|
|
|
|
/**************************************
|
|
* for non-CPU MTCMOS
|
|
**************************************/
|
|
#define POWERON_CONFIG_EN SPM_REG(0x0000)
|
|
#define SPM_POWER_ON_VAL0 SPM_REG(0x0004)
|
|
#define SPM_POWER_ON_VAL1 SPM_REG(0x0008)
|
|
#define PWR_STATUS SPM_REG(0x0180)
|
|
#define PWR_STATUS_2ND SPM_REG(0x0184)
|
|
#define VCODEC_PWR_CON SPM_REG(0x0300)
|
|
#define ISP_PWR_CON SPM_REG(0x0308)
|
|
#define DIS_PWR_CON SPM_REG(0x030C)
|
|
#define MFG_CORE1_PWR_CON SPM_REG(0x0310)
|
|
#define AUDIO_PWR_CON SPM_REG(0x0314)
|
|
#define IFR_PWR_CON SPM_REG(0x0318)
|
|
#define DPY_PWR_CON SPM_REG(0x031C)
|
|
#define MD1_PWR_CON SPM_REG(0x0320)
|
|
#define VPU_TOP_PWR_CON SPM_REG(0x0324)
|
|
#define CONN_PWR_CON SPM_REG(0x032C)
|
|
#define VPU_CORE2_PWR_CON SPM_REG(0x0330)
|
|
#define MFG_ASYNC_PWR_CON SPM_REG(0x0334)
|
|
#define MFG_PWR_CON SPM_REG(0x0338)
|
|
#define VPU_CORE0_PWR_CON SPM_REG(0x033C)
|
|
#define VPU_CORE1_PWR_CON SPM_REG(0x0340)
|
|
#define CAM_PWR_CON SPM_REG(0x0344)
|
|
#define MFG_2D_PWR_CON SPM_REG(0x0348)
|
|
#define MFG_CORE0_PWR_CON SPM_REG(0x034C)
|
|
#define VDE_PWR_CON SPM_REG(0x0370)
|
|
#define MD_SRAM_ISO_CON SPM_REG(0x0394)
|
|
#define MD_EXTRA_PWR_CON SPM_REG(0x0398)
|
|
|
|
#define SPM_PROJECT_CODE 0xB16
|
|
|
|
#define INFRA_TOPAXI_SI0_CTL INFRACFG_REG(0x0200)
|
|
#define INFRA_TOPAXI_PROTECTEN INFRACFG_REG(0x0220)
|
|
#define INFRA_TOPAXI_PROTECTEN_STA0 INFRACFG_REG(0x0224)
|
|
|
|
#define INFRA_TOPAXI_PROTECTEN_1 INFRACFG_REG(0x0250)
|
|
|
|
#define INFRA_TOPAXI_PROTECTEN_SET INFRACFG_REG(0x02A0)
|
|
#define INFRA_TOPAXI_PROTECTEN_STA1 INFRACFG_REG(0x0228)
|
|
#define INFRA_TOPAXI_PROTECTEN_CLR INFRACFG_REG(0x02A4)
|
|
|
|
#define INFRA_TOPAXI_PROTECTEN_1_SET INFRACFG_REG(0x02A8)
|
|
#define INFRA_TOPAXI_PROTECTEN_STA0_1 INFRACFG_REG(0x0254)
|
|
#define INFRA_TOPAXI_PROTECTEN_STA1_1 INFRACFG_REG(0x0258)
|
|
#define INFRA_TOPAXI_PROTECTEN_1_CLR INFRACFG_REG(0x02AC)
|
|
|
|
/* fix with infra config address */
|
|
#define INFRA_TOPAXI_SI0_STA INFRA_REG(0x0000)
|
|
#define INFRA_TOPAXI_SI1_STA INFRA_REG(0x0004)
|
|
#define INFRA_TOPAXI_SI2_STA INFRA_REG(0x0028)
|
|
#define INFRA_TOPAXI_SI3_STA INFRA_REG(0x002C)
|
|
#define INFRA_TOPAXI_SI4_STA INFRA_REG(0x0030)
|
|
#define INFRA_TOPAXI_MI_STA INFRA_REG(0x0008)
|
|
#define INFRA_MCI_SI0_STA INFRA_REG(0x0010)
|
|
#define INFRA_MCI_SI2_STA INFRA_REG(0x0018)
|
|
#define INFRA_BUS_IDLE_STA4 INFRA_REG(0x018C)
|
|
|
|
|
|
/* SMI COMMON */
|
|
#define SMI_COMMON_SMI_CLAMP SMI_COMMON_REG(0x03C0)
|
|
#define SMI_COMMON_SMI_CLAMP_SET SMI_COMMON_REG(0x03C4)
|
|
#define SMI_COMMON_SMI_CLAMP_CLR SMI_COMMON_REG(0x03C8)
|
|
|
|
/* CONN HIF */
|
|
#define CONN_HIF_TOP_MISC CONN_HIF_REG(0x0104)
|
|
#define CONN_HIF_DBG_IDX CONN_HIF_REG(0x012C)
|
|
#define CONN_HIF_DBG_PROBE CONN_HIF_REG(0x0130)
|
|
#define CONN_HIF_BUSY_STATUS CONN_HIF_REG(0x0138)
|
|
#define CONN_HIF_PDMA_BUSY_STATUS CONN_HIF_REG(0x0168)
|
|
|
|
/* CONN MCU */
|
|
#define CONN_MCU_CLOCK_CONTROL CONN_MCU_REG(0x0100)
|
|
#define CONN_MCU_BUS_CONTROL CONN_MCU_REG(0x0110)
|
|
#define CONN_MCU_EMI_CONTROL CONN_MCU_REG(0x0150)
|
|
#define CONN_MCU_DEBUG_SELECT CONN_MCU_REG(0x0400)
|
|
#define CONN_MCU_DEBUG_STATUS CONN_MCU_REG(0x040C)
|
|
#define CONN_MCU_BUSHANGCR CONN_MCU_REG(0x0440)
|
|
#define CONN_MCU_BUSHANGADDR CONN_MCU_REG(0x0444)
|
|
|
|
/* Define MTCMOS Bus Protect Mask */
|
|
#define MD1_PROT_STEP1_0_MASK ((0x1 << 7))
|
|
#define MD1_PROT_STEP1_0_ACK_MASK ((0x1 << 7))
|
|
#define MD1_PROT_STEP2_0_MASK ((0x1 << 3) \
|
|
|(0x1 << 4))
|
|
#define MD1_PROT_STEP2_0_ACK_MASK ((0x1 << 3) \
|
|
|(0x1 << 4))
|
|
#define MD1_PROT_STEP2_1_MASK ((0x1 << 6))
|
|
#define MD1_PROT_STEP2_1_ACK_MASK ((0x1 << 6))
|
|
#define CONN_PROT_STEP1_0_MASK ((0x1 << 13))
|
|
#define CONN_PROT_STEP1_0_ACK_MASK ((0x1 << 13))
|
|
#define CONN_PROT_STEP1_1_MASK ((0x1 << 18))
|
|
#define CONN_PROT_STEP1_1_ACK_MASK ((0x1 << 18))
|
|
#define CONN_PROT_STEP2_0_MASK ((0x1 << 14) \
|
|
|(0x1 << 16))
|
|
#define CONN_PROT_STEP2_0_ACK_MASK ((0x1 << 14) \
|
|
|(0x1 << 16))
|
|
#define DPY_PROT_STEP1_0_MASK ((0x1 << 0) \
|
|
|(0x1 << 5) \
|
|
|(0x1 << 23) \
|
|
|(0x1 << 26))
|
|
#define DPY_PROT_STEP1_0_ACK_MASK ((0x1 << 0) \
|
|
|(0x1 << 5) \
|
|
|(0x1 << 23) \
|
|
|(0x1 << 26))
|
|
#define DPY_PROT_STEP1_1_MASK ((0x1 << 10) \
|
|
|(0x1 << 11) \
|
|
|(0x1 << 12) \
|
|
|(0x1 << 13) \
|
|
|(0x1 << 14) \
|
|
|(0x1 << 15) \
|
|
|(0x1 << 16) \
|
|
|(0x1 << 17))
|
|
#define DPY_PROT_STEP1_1_ACK_MASK ((0x1 << 10) \
|
|
|(0x1 << 11) \
|
|
|(0x1 << 12) \
|
|
|(0x1 << 13) \
|
|
|(0x1 << 14) \
|
|
|(0x1 << 15) \
|
|
|(0x1 << 16) \
|
|
|(0x1 << 17))
|
|
#define DPY_PROT_STEP2_0_MASK ((0x1 << 1) \
|
|
|(0x1 << 2) \
|
|
|(0x1 << 3) \
|
|
|(0x1 << 4) \
|
|
|(0x1 << 10) \
|
|
|(0x1 << 11) \
|
|
|(0x1 << 21) \
|
|
|(0x1 << 22))
|
|
#define DPY_PROT_STEP2_0_ACK_MASK ((0x1 << 1) \
|
|
|(0x1 << 2) \
|
|
|(0x1 << 3) \
|
|
|(0x1 << 4) \
|
|
|(0x1 << 10) \
|
|
|(0x1 << 11) \
|
|
|(0x1 << 21) \
|
|
|(0x1 << 22))
|
|
#define DIS_PROT_STEP1_0_MASK ((0x1 << 19) \
|
|
|(0x1 << 20))
|
|
#define DIS_PROT_STEP1_0_ACK_MASK ((0x1 << 19) \
|
|
|(0x1 << 20))
|
|
#define DIS_PROT_STEP2_0_MASK ((0x1 << 16) \
|
|
|(0x1 << 17))
|
|
#define DIS_PROT_STEP2_0_ACK_MASK ((0x1 << 16) \
|
|
|(0x1 << 17))
|
|
#define DIS_PROT_STEP3_0_MASK ((0x1 << 10) \
|
|
|(0x1 << 11))
|
|
#define DIS_PROT_STEP3_0_ACK_MASK ((0x1 << 10) \
|
|
|(0x1 << 11))
|
|
#define DIS_PROT_STEP4_0_MASK ((0x1 << 1) \
|
|
|(0x1 << 2))
|
|
#define DIS_PROT_STEP4_0_ACK_MASK ((0x1 << 1) \
|
|
|(0x1 << 2))
|
|
#define MFG_PROT_STEP1_0_MASK ((0x1 << 25))
|
|
#define MFG_PROT_STEP1_0_ACK_MASK ((0x1 << 25))
|
|
#define MFG_PROT_STEP2_0_MASK ((0x1 << 21) \
|
|
|(0x1 << 22))
|
|
#define MFG_PROT_STEP2_0_ACK_MASK ((0x1 << 21) \
|
|
|(0x1 << 22))
|
|
#define ISP_PROT_STEP1_0_MASK ((0x1 << 20))
|
|
#define ISP_PROT_STEP1_0_ACK_MASK ((0x1 << 20))
|
|
#define ISP_PROT_STEP2_0_MASK ((0x1 << 2))
|
|
#define ISP_PROT_STEP2_0_ACK_MASK ((0x1 << 2))
|
|
#define CAM_PROT_STEP1_0_MASK ((0x1 << 19) \
|
|
|(0x1 << 21))
|
|
#define CAM_PROT_STEP1_0_ACK_MASK ((0x1 << 19) \
|
|
|(0x1 << 21))
|
|
#define CAM_PROT_STEP2_0_MASK ((0x1 << 20))
|
|
#define CAM_PROT_STEP2_0_ACK_MASK ((0x1 << 20))
|
|
#define CAM_PROT_STEP2_1_MASK ((0x1 << 3))
|
|
#define CAM_PROT_STEP2_1_ACK_MASK ((0x1 << 3))
|
|
|
|
/* Define MTCMOS Power Status Mask */
|
|
|
|
#define MD1_PWR_STA_MASK (0x1 << 0)
|
|
#define CONN_PWR_STA_MASK (0x1 << 1)
|
|
#define DPY_PWR_STA_MASK (0x1 << 2)
|
|
#define DIS_PWR_STA_MASK (0x1 << 3)
|
|
#define MFG_PWR_STA_MASK (0x1 << 4)
|
|
#define ISP_PWR_STA_MASK (0x1 << 5)
|
|
#define IFR_PWR_STA_MASK (0x1 << 6)
|
|
#define MFG_CORE0_PWR_STA_MASK (0x1 << 7)
|
|
#define MFG_ASYNC_PWR_STA_MASK (0x1 << 23)
|
|
#define CAM_PWR_STA_MASK (0x1 << 25)
|
|
#define VCODEC_PWR_STA_MASK (0x1 << 26)
|
|
|
|
/* Define CPU SRAM Mask */
|
|
|
|
/* Define Non-CPU SRAM Mask */
|
|
#define MD1_SRAM_PDN (0x1 << 8)
|
|
#define MD1_SRAM_PDN_ACK (0x0 << 12)
|
|
#define MD1_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define DPY_SRAM_PDN (0xF << 8)
|
|
#define DPY_SRAM_PDN_ACK (0xF << 12)
|
|
#define DPY_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define DPY_SRAM_PDN_ACK_BIT1 (0x1 << 13)
|
|
#define DPY_SRAM_PDN_ACK_BIT2 (0x1 << 14)
|
|
#define DPY_SRAM_PDN_ACK_BIT3 (0x1 << 15)
|
|
#define DIS_SRAM_PDN (0x1 << 8)
|
|
#define DIS_SRAM_PDN_ACK (0x1 << 12)
|
|
#define DIS_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define MFG_SRAM_PDN (0x1 << 8)
|
|
#define MFG_SRAM_PDN_ACK (0x1 << 12)
|
|
#define MFG_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define ISP_SRAM_PDN (0x1 << 8)
|
|
#define ISP_SRAM_PDN_ACK (0x1 << 12)
|
|
#define ISP_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define IFR_SRAM_PDN (0x1 << 8)
|
|
#define IFR_SRAM_PDN_ACK (0x1 << 12)
|
|
#define IFR_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define MFG_CORE0_SRAM_PDN (0x1 << 8)
|
|
#define MFG_CORE0_SRAM_PDN_ACK (0x1 << 12)
|
|
#define MFG_CORE0_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define CAM_SRAM_PDN (0x3 << 8)
|
|
#define CAM_SRAM_PDN_ACK (0x3 << 12)
|
|
#define CAM_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
#define CAM_SRAM_PDN_ACK_BIT1 (0x1 << 13)
|
|
#define VCODEC_SRAM_PDN (0x1 << 8)
|
|
#define VCODEC_SRAM_PDN_ACK (0x1 << 12)
|
|
#define VCODEC_SRAM_PDN_ACK_BIT0 (0x1 << 12)
|
|
|
|
static struct subsys syss[] = /* NR_SYSS *//* FIXME: set correct value */
|
|
{
|
|
[SYS_MD1] = {
|
|
.name = __stringify(SYS_MD1),
|
|
.sta_mask = MD1_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &MD1_sys_ops,
|
|
},
|
|
[SYS_CONN] = {
|
|
.name = __stringify(SYS_CONN),
|
|
.sta_mask = CONN_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &CONN_sys_ops,
|
|
},
|
|
[SYS_DPY] = {
|
|
.name = __stringify(SYS_DPY),
|
|
.sta_mask = DPY_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &DPY_sys_ops,
|
|
},
|
|
[SYS_DIS] = {
|
|
.name = __stringify(SYS_DIS),
|
|
.sta_mask = DIS_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &DIS_sys_ops,
|
|
},
|
|
[SYS_MFG] = {
|
|
.name = __stringify(SYS_MFG),
|
|
.sta_mask = MFG_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &MFG_sys_ops,
|
|
},
|
|
[SYS_ISP] = {
|
|
.name = __stringify(SYS_ISP),
|
|
.sta_mask = ISP_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &ISP_sys_ops,
|
|
},
|
|
[SYS_IFR] = {
|
|
.name = __stringify(SYS_IFR),
|
|
.sta_mask = IFR_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &IFR_sys_ops,
|
|
},
|
|
[SYS_MFG_CORE0] = {
|
|
.name = __stringify(SYS_MFG_CORE0),
|
|
.sta_mask = MFG_CORE0_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &MFG_CORE0_sys_ops,
|
|
},
|
|
[SYS_MFG_ASYNC] = {
|
|
.name = __stringify(SYS_MFG_ASYNC),
|
|
.sta_mask = MFG_ASYNC_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &MFG_ASYNC_sys_ops,
|
|
},
|
|
[SYS_CAM] = {
|
|
.name = __stringify(SYS_CAM),
|
|
.sta_mask = CAM_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &CAM_sys_ops,
|
|
},
|
|
[SYS_VCODEC] = {
|
|
.name = __stringify(SYS_VCODEC),
|
|
.sta_mask = VCODEC_PWR_STA_MASK,
|
|
/* .ctl_addr = NULL, */
|
|
.sram_pdn_bits = 0,
|
|
.sram_pdn_ack_bits = 0,
|
|
.bus_prot_mask = 0,
|
|
.ops = &VCODEC_sys_ops,
|
|
},
|
|
};
|
|
|
|
LIST_HEAD(pgcb_list);
|
|
|
|
struct pg_callbacks *register_pg_callback(struct pg_callbacks *pgcb)
|
|
{
|
|
INIT_LIST_HEAD(&pgcb->list);
|
|
|
|
list_add(&pgcb->list, &pgcb_list);
|
|
|
|
return pgcb;
|
|
}
|
|
EXPORT_SYMBOL(register_pg_callback);
|
|
|
|
static struct subsys *id_to_sys(unsigned int id)
|
|
{
|
|
return id < NR_SYSS ? &syss[id] : NULL;
|
|
}
|
|
|
|
enum dbg_id {
|
|
DBG_ID_MD1_BUS = 0,
|
|
DBG_ID_CONN_BUS,
|
|
DBG_ID_DPY_BUS,
|
|
DBG_ID_DIS_BUS,
|
|
DBG_ID_MFG_BUS,
|
|
DBG_ID_ISP_BUS,
|
|
DBG_ID_IFR_BUS,
|
|
DBG_ID_MFG_CORE0_BUS,
|
|
DBG_ID_MFG_ASYNC_BUS,
|
|
DBG_ID_CAM_BUS,
|
|
DBG_ID_VCODEC_BUS = 10,
|
|
|
|
DBG_ID_MD1_PWR = 11,
|
|
DBG_ID_CONN_PWR,
|
|
DBG_ID_DPY_PWR,
|
|
DBG_ID_DIS_PWR,
|
|
DBG_ID_MFG_PWR,
|
|
DBG_ID_ISP_PWR,
|
|
DBG_ID_IFR_PWR,
|
|
DBG_ID_MFG_CORE0_PWR,
|
|
DBG_ID_MFG_ASYNC_PWR,
|
|
DBG_ID_CAM_PWR,
|
|
DBG_ID_VCODEC_PWR,
|
|
DBG_ID_NUM = 22,
|
|
};
|
|
|
|
#define ID_MADK 0xFF000000
|
|
#define STA_MASK 0x00F00000
|
|
#define STEP_MASK 0x000000FF
|
|
|
|
#define INCREASE_STEPS \
|
|
do { DBG_STEP++; } while (0)
|
|
|
|
static int DBG_ID;
|
|
static int DBG_STA;
|
|
static int DBG_STEP;
|
|
/*
|
|
* ram console data0 define
|
|
* [31:24] : DBG_ID
|
|
* [23:20] : DBG_STA
|
|
* [7:0] : DBG_STEP
|
|
*/
|
|
static void ram_console_update(void)
|
|
{
|
|
struct pg_callbacks *pgcb;
|
|
u32 data[8] = {0x0};
|
|
u32 i = 0, j = 0;
|
|
static u32 pre_data;
|
|
static int k;
|
|
static bool print_once = true;
|
|
|
|
if (DBG_ID < 0 || DBG_ID >= DBG_ID_NUM)
|
|
return;
|
|
|
|
data[i] = ((DBG_ID << 24) & ID_MADK)
|
|
| ((DBG_STA << 20) & STA_MASK)
|
|
| (DBG_STEP & STEP_MASK);
|
|
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN_1);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN_STA0);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN_STA1);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN_STA0_1);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_PROTECTEN_STA1_1);
|
|
data[++i] = clk_readl(INFRA_TOPAXI_SI3_STA);
|
|
|
|
if (pre_data == data[0])
|
|
k++;
|
|
else if (pre_data != data[0]) {
|
|
k = 0;
|
|
pre_data = data[0];
|
|
print_once = true;
|
|
}
|
|
|
|
if (k > 5000 && print_once) {
|
|
enum subsys_id id =
|
|
(enum subsys_id)(DBG_ID % (DBG_ID_NUM / 2));
|
|
|
|
print_once = false;
|
|
k = 0;
|
|
if (DBG_ID == DBG_ID_CONN_BUS) {
|
|
if (DBG_STEP <= 1 && DBG_STA == STA_POWER_DOWN) {
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR,
|
|
CONN_PROT_STEP1_0_MASK);
|
|
}
|
|
}
|
|
#ifdef CONFIG_DEBUG_FS
|
|
print_enabled_clks_once();
|
|
#endif
|
|
|
|
/* Space for clk in AEE is not enough,
|
|
* use pr log instead.
|
|
*/
|
|
pr_notice("CONN_HIF_TOP_MISC=0x%08x\n",
|
|
clk_readl(CONN_HIF_TOP_MISC));
|
|
pr_notice("CONN_HIF_BUSY_STATUS=0x%08x\n",
|
|
clk_readl(CONN_HIF_BUSY_STATUS));
|
|
pr_notice("CONN_HIF_PDMA_BUSY_STATUS=0x%08x\n",
|
|
clk_readl(CONN_HIF_PDMA_BUSY_STATUS));
|
|
|
|
clk_writel(CONN_HIF_DBG_IDX, 0x2222);
|
|
pr_notice("CONN_HIF_DBG_PROBE=0x%08x\n",
|
|
clk_readl(CONN_HIF_DBG_PROBE));
|
|
clk_writel(CONN_HIF_DBG_IDX, 0x3333);
|
|
pr_notice("CONN_HIF_DBG_PROBE=0x%08x\n",
|
|
clk_readl(CONN_HIF_DBG_PROBE));
|
|
clk_writel(CONN_HIF_DBG_IDX, 0x4444);
|
|
pr_notice("CONN_HIF_DBG_PROBE=0x%08x\n",
|
|
clk_readl(CONN_HIF_DBG_PROBE));
|
|
|
|
pr_notice("CONN_MCU_EMI_CONTROL=0x%08x\n",
|
|
clk_readl(CONN_MCU_EMI_CONTROL));
|
|
pr_notice("CONN_MCU_CLOCK_CONTROL=0x%08x\n",
|
|
clk_readl(CONN_MCU_CLOCK_CONTROL));
|
|
pr_notice("CONN_MCU_BUS_CONTROL=0x%08x\n",
|
|
clk_readl(CONN_MCU_BUS_CONTROL));
|
|
pr_notice("CONN_MCU_BUSHANGCR=0x%08x\n",
|
|
clk_readl(CONN_MCU_BUSHANGCR));
|
|
pr_notice("CONN_MCU_BUSHANGADDR=0x%08x\n",
|
|
clk_readl(CONN_MCU_BUSHANGADDR));
|
|
|
|
clk_writel(CONN_MCU_DEBUG_SELECT, 0x003e3d00);
|
|
pr_notice("CONN_MCU_DEBUG_STATUS=0x%08x\n",
|
|
clk_readl(CONN_MCU_DEBUG_STATUS));
|
|
clk_writel(CONN_MCU_DEBUG_SELECT, 0x00403f00);
|
|
pr_notice("CONN_MCU_DEBUG_STATUS=0x%08x\n",
|
|
clk_readl(CONN_MCU_DEBUG_STATUS));
|
|
clk_writel(CONN_MCU_DEBUG_SELECT, 0x00424100);
|
|
pr_notice("CONN_MCU_DEBUG_STATUS=0x%08x\n",
|
|
clk_readl(CONN_MCU_DEBUG_STATUS));
|
|
clk_writel(CONN_MCU_DEBUG_SELECT, 0x00444300);
|
|
pr_notice("CONN_MCU_DEBUG_STATUS=0x%08x\n",
|
|
clk_readl(CONN_MCU_DEBUG_STATUS));
|
|
|
|
list_for_each_entry_reverse(pgcb, &pgcb_list, list) {
|
|
if (pgcb->debug_dump)
|
|
pgcb->debug_dump(id);
|
|
}
|
|
|
|
if (DBG_ID == DBG_ID_CONN_BUS) {
|
|
if (DBG_STEP <= 1 && DBG_STA == STA_POWER_DOWN) {
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET,
|
|
CONN_PROT_STEP1_0_MASK);
|
|
j = 0;
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& CONN_PROT_STEP1_0_ACK_MASK)
|
|
!= CONN_PROT_STEP1_0_ACK_MASK) {
|
|
udelay(1);
|
|
if (j > 1000)
|
|
break;
|
|
j++;
|
|
}
|
|
|
|
if (j > 1000)
|
|
DBG_STEP = CONN_TIMEOUT_STEP1;
|
|
else
|
|
DBG_STEP = CONN_TIMEOUT_RECOVERY;
|
|
|
|
data[0] = ((DBG_ID << 24) & ID_MADK)
|
|
| ((DBG_STA << 20) & STA_MASK)
|
|
| (DBG_STEP & STEP_MASK);
|
|
pre_data = data[0];
|
|
}
|
|
}
|
|
|
|
if (DBG_ID >= (DBG_ID_NUM / 2))
|
|
pr_notice("%s %s MTCMOS PWR hang at %s flow step %d\n",
|
|
"[clkmgr]",
|
|
syss[(DBG_ID - (DBG_ID_NUM / 2))].name,
|
|
DBG_STA ? "pwron":"pdn",
|
|
DBG_STEP);
|
|
else
|
|
pr_notice("%s %s MTCMOS BUS hang at %s flow step %d\n",
|
|
"[clkmgr]",
|
|
syss[DBG_ID].name,
|
|
DBG_STA ? "pwron":"pdn",
|
|
DBG_STEP);
|
|
|
|
for (i = 1; i < ARRAY_SIZE(data); i++)
|
|
pr_notice("%s: clk[%d] = 0x%x\n", __func__, i, data[i]);
|
|
|
|
pr_notice("INFRA_TOPAXI_SI0_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_SI0_STA));
|
|
pr_notice("INFRA_TOPAXI_SI1_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_SI1_STA));
|
|
pr_notice("INFRA_TOPAXI_SI2_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_SI2_STA));
|
|
pr_notice("INFRA_TOPAXI_SI3_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_SI3_STA));
|
|
pr_notice("INFRA_TOPAXI_SI4_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_SI4_STA));
|
|
pr_notice("INFRA_TOPAXI_MI_STA =0x%x\n",
|
|
spm_read(INFRA_TOPAXI_MI_STA));
|
|
pr_notice("INFRA_MCI_SI0_STA =0x%x\n",
|
|
spm_read(INFRA_MCI_SI0_STA));
|
|
pr_notice("INFRA_MCI_SI2_STA =0x%x\n",
|
|
spm_read(INFRA_MCI_SI2_STA));
|
|
}
|
|
|
|
#ifdef CONFIG_MTK_RAM_CONSOLE
|
|
for (i = 0; ARRAY_SIZE(data) < 8; i++)
|
|
aee_rr_rec_clk(i, data[i]);
|
|
/*todo: add each domain's debug register to ram console*/
|
|
#endif
|
|
}
|
|
|
|
/* auto-gen begin*/
|
|
static int spm_mtcmos_ctrl_md1_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MD1_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off MD1" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, MD1_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& MD1_PROT_STEP1_0_ACK_MASK)
|
|
!= MD1_PROT_STEP1_0_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, MD1_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& MD1_PROT_STEP2_0_ACK_MASK)
|
|
!= MD1_PROT_STEP2_0_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, MD1_PROT_STEP2_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& MD1_PROT_STEP2_1_ACK_MASK)
|
|
!= MD1_PROT_STEP2_1_ACK_MASK)
|
|
ram_console_update();
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, MD1_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, MD1_PROT_STEP2_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
*releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, MD1_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on MD1" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
int spm_mtcmos_ctrl_md1_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MD1_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="MD_EXTRA_PWR_CON[0]=1"*/
|
|
spm_write(MD_EXTRA_PWR_CON,
|
|
spm_read(MD_EXTRA_PWR_CON) | (0x1 << 0));
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(MD1_PWR_CON,
|
|
spm_read(MD1_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(MD1_PWR_CON,
|
|
spm_read(MD1_PWR_CON) | PWR_ISO);
|
|
/* TINFO="MD_SRAM_ISO_CON[0]=0"*/
|
|
spm_write(MD_SRAM_ISO_CON,
|
|
spm_read(MD_SRAM_ISO_CON) & ~(0x1 << 0));
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) | MD1_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
#endif
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & MD1_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & MD1_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Finish to turn off MD1" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on MD1" */
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & MD1_PWR_STA_MASK)
|
|
!= MD1_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & MD1_PWR_STA_MASK)
|
|
!= MD1_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~(0x1 << 8));
|
|
/* TINFO="MD_SRAM_ISO_CON[0]=1"*/
|
|
spm_write(MD_SRAM_ISO_CON,
|
|
spm_read(MD_SRAM_ISO_CON) | (0x1 << 0));
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(MD1_PWR_CON, spm_read(MD1_PWR_CON) | PWR_RST_B);
|
|
/* TINFO="MD_EXTRA_PWR_CON[0]=0"*/
|
|
spm_write(MD_EXTRA_PWR_CON,
|
|
spm_read(MD_EXTRA_PWR_CON) & ~(0x1 << 0));
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_conn_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_CONN_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off CONN" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, CONN_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& CONN_PROT_STEP1_0_ACK_MASK)
|
|
!= CONN_PROT_STEP1_0_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step1 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET,
|
|
CONN_PROT_STEP1_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& CONN_PROT_STEP1_1_ACK_MASK)
|
|
== CONN_PROT_STEP1_1_ACK_MASK) {
|
|
ram_console_update();
|
|
if (DBG_STEP == CONN_TIMEOUT_RECOVERY)
|
|
break;
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, CONN_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& CONN_PROT_STEP2_0_ACK_MASK)
|
|
!= CONN_PROT_STEP2_0_ACK_MASK)
|
|
ram_console_update();
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR,
|
|
CONN_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR,
|
|
CONN_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR,
|
|
CONN_PROT_STEP1_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on CONN" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_conn_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_CONN_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(CONN_PWR_CON, spm_read(CONN_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & CONN_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & CONN_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
#endif
|
|
/* TINFO="Finish to turn off CONN" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on CONN" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(CONN_PWR_CON, spm_read(CONN_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & CONN_PWR_STA_MASK)
|
|
!= CONN_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & CONN_PWR_STA_MASK)
|
|
!= CONN_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(CONN_PWR_CON,
|
|
spm_read(CONN_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(CONN_PWR_CON, spm_read(CONN_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(CONN_PWR_CON, spm_read(CONN_PWR_CON) | PWR_RST_B);
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_dpy_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_DPY_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off DPY" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, DPY_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& DPY_PROT_STEP1_0_ACK_MASK)
|
|
!= DPY_PROT_STEP1_0_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step1 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, DPY_PROT_STEP1_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& DPY_PROT_STEP1_1_ACK_MASK)
|
|
!= DPY_PROT_STEP1_1_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, DPY_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& DPY_PROT_STEP2_0_ACK_MASK)
|
|
!= DPY_PROT_STEP2_0_ACK_MASK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, DPY_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, DPY_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 1" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, DPY_PROT_STEP1_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on DPY" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_dpy_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_DPY_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | DPY_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DPY_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(DPY_PWR_CON) & DPY_SRAM_PDN_ACK)
|
|
!= DPY_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & DPY_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & DPY_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off DPY" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on DPY" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & DPY_PWR_STA_MASK)
|
|
!= DPY_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & DPY_PWR_STA_MASK)
|
|
!= DPY_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) | PWR_RST_B);
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DPY_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(DPY_PWR_CON) & DPY_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~(0x1 << 9));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DPY_SRAM_PDN_ACK_BIT1 = 0" */
|
|
while (spm_read(DPY_PWR_CON) & DPY_SRAM_PDN_ACK_BIT1)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~(0x1 << 10));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DPY_SRAM_PDN_ACK_BIT2 = 0" */
|
|
while (spm_read(DPY_PWR_CON) & DPY_SRAM_PDN_ACK_BIT2)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
spm_write(DPY_PWR_CON, spm_read(DPY_PWR_CON) & ~(0x1 << 11));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DPY_SRAM_PDN_ACK_BIT3 = 0" */
|
|
while (spm_read(DPY_PWR_CON) & DPY_SRAM_PDN_ACK_BIT3)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
}
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_dis_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_DIS_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off DIS" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, DIS_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& DIS_PROT_STEP1_0_ACK_MASK)
|
|
!= DIS_PROT_STEP1_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, DIS_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& DIS_PROT_STEP2_0_ACK_MASK)
|
|
!= DIS_PROT_STEP2_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step3 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, DIS_PROT_STEP3_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& DIS_PROT_STEP3_0_ACK_MASK)
|
|
!= DIS_PROT_STEP3_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step4 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, DIS_PROT_STEP4_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& DIS_PROT_STEP4_0_ACK_MASK)
|
|
!= DIS_PROT_STEP4_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | DIS_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DIS_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(DIS_PWR_CON) & DIS_SRAM_PDN_ACK)
|
|
!= DIS_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until DIS_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(DIS_PWR_CON) & DIS_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Release bus protect - step4 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, DIS_PROT_STEP4_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step3 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, DIS_PROT_STEP3_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, DIS_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, DIS_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on DIS" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_dis_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_DIS_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & DIS_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & DIS_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off DIS" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on DIS" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & DIS_PWR_STA_MASK)
|
|
!= DIS_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & DIS_PWR_STA_MASK)
|
|
!= DIS_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(DIS_PWR_CON, spm_read(DIS_PWR_CON) | PWR_RST_B);
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_mfg_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MFG_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off MFG" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, MFG_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& MFG_PROT_STEP1_0_ACK_MASK)
|
|
!= MFG_PROT_STEP1_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, MFG_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& MFG_PROT_STEP2_0_ACK_MASK)
|
|
!= MFG_PROT_STEP2_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | MFG_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until MFG_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(MFG_PWR_CON) & MFG_SRAM_PDN_ACK)
|
|
!= MFG_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
/* Need f_fmfg_core_ck for SRAM PDN delay IP. */
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until MFG_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(MFG_PWR_CON) & MFG_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
/* Need f_fmfg_core_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, MFG_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, MFG_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on MFG" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_mfg_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MFG_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & MFG_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & MFG_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
#endif
|
|
/* TINFO="Finish to turn off MFG" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on MFG" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & MFG_PWR_STA_MASK)
|
|
!= MFG_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & MFG_PWR_STA_MASK)
|
|
!= MFG_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(MFG_PWR_CON, spm_read(MFG_PWR_CON) | PWR_RST_B);
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_isp_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_ISP_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off ISP" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, ISP_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& ISP_PROT_STEP1_0_ACK_MASK)
|
|
!= ISP_PROT_STEP1_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(SMI_COMMON_SMI_CLAMP_SET, ISP_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(SMI_COMMON_SMI_CLAMP)
|
|
& ISP_PROT_STEP2_0_ACK_MASK)
|
|
!= ISP_PROT_STEP2_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
#endif
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | ISP_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until ISP_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(ISP_PWR_CON) & ISP_SRAM_PDN_ACK)
|
|
!= ISP_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until ISP_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(ISP_PWR_CON) & ISP_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(SMI_COMMON_SMI_CLAMP_CLR, ISP_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, ISP_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on ISP" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_isp_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_ISP_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & ISP_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & ISP_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
#endif
|
|
/* TINFO="Finish to turn off ISP" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on ISP" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & ISP_PWR_STA_MASK)
|
|
!= ISP_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & ISP_PWR_STA_MASK)
|
|
!= ISP_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(ISP_PWR_CON, spm_read(ISP_PWR_CON) | PWR_RST_B);
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_ifr_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_IFR_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off IFR" */
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | IFR_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until IFR_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(IFR_PWR_CON) & IFR_SRAM_PDN_ACK)
|
|
!= IFR_SRAM_PDN_ACK) {
|
|
/* SRAM PDN delay IP clock is 26MHz.
|
|
* Print SRAM control and ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & IFR_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & IFR_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off IFR" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on IFR" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & IFR_PWR_STA_MASK)
|
|
!= IFR_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & IFR_PWR_STA_MASK)
|
|
!= IFR_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) | PWR_RST_B);
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(IFR_PWR_CON, spm_read(IFR_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until IFR_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(IFR_PWR_CON) & IFR_SRAM_PDN_ACK_BIT0) {
|
|
/* SRAM PDN delay IP clock is 26MHz.
|
|
* Print SRAM control and ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn on IFR" */
|
|
}
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_mfg_core0_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MFG_CORE0_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off MFG_CORE0" */
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | MFG_CORE0_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until MFG_CORE0_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(MFG_CORE0_PWR_CON)
|
|
& MFG_CORE0_SRAM_PDN_ACK)
|
|
!= MFG_CORE0_SRAM_PDN_ACK) {
|
|
ram_console_update();/* n/a */
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & MFG_CORE0_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & MFG_CORE0_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off MFG_CORE0" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on MFG_CORE0" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & MFG_CORE0_PWR_STA_MASK)
|
|
!= MFG_CORE0_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & MFG_CORE0_PWR_STA_MASK)
|
|
!= MFG_CORE0_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) | PWR_RST_B);
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(MFG_CORE0_PWR_CON,
|
|
spm_read(MFG_CORE0_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until MFG_CORE0_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(MFG_CORE0_PWR_CON)
|
|
& MFG_CORE0_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn on MFG_CORE0" */
|
|
}
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_mfg_async_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_MFG_ASYNC_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off MFG_ASYNC" */
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
#endif
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & MFG_ASYNC_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & MFG_ASYNC_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off MFG_ASYNC" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on MFG_ASYNC" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & MFG_ASYNC_PWR_STA_MASK)
|
|
!= MFG_ASYNC_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & MFG_ASYNC_PWR_STA_MASK)
|
|
!= MFG_ASYNC_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(MFG_ASYNC_PWR_CON,
|
|
spm_read(MFG_ASYNC_PWR_CON) | PWR_RST_B);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
#endif
|
|
/* TINFO="Finish to turn on MFG_ASYNC" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_cam_bus_prot(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_CAM_BUS;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off CAM" */
|
|
/* TINFO="Set bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_SET, CAM_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1_1)
|
|
& CAM_PROT_STEP1_0_ACK_MASK)
|
|
!= CAM_PROT_STEP1_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_SET, CAM_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(INFRA_TOPAXI_PROTECTEN_STA1)
|
|
& CAM_PROT_STEP2_0_ACK_MASK)
|
|
!= CAM_PROT_STEP2_0_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set bus protect - step2 : 1" */
|
|
spm_write(SMI_COMMON_SMI_CLAMP_SET, CAM_PROT_STEP2_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
while ((spm_read(SMI_COMMON_SMI_CLAMP)
|
|
& CAM_PROT_STEP2_1_ACK_MASK)
|
|
!= CAM_PROT_STEP2_1_ACK_MASK) {
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | CAM_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until CAM_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(CAM_PWR_CON) & CAM_SRAM_PDN_ACK)
|
|
!= CAM_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
#endif
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until CAM_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(CAM_PWR_CON) & CAM_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~(0x1 << 9));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until CAM_SRAM_PDN_ACK_BIT1 = 0" */
|
|
while (spm_read(CAM_PWR_CON) & CAM_SRAM_PDN_ACK_BIT1)
|
|
ram_console_update();
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_CLR, CAM_PROT_STEP2_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step2 : 1" */
|
|
spm_write(SMI_COMMON_SMI_CLAMP_CLR, CAM_PROT_STEP2_1_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Release bus protect - step1 : 0" */
|
|
spm_write(INFRA_TOPAXI_PROTECTEN_1_CLR, CAM_PROT_STEP1_0_MASK);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* Note that this protect ack check after
|
|
* releasing protect has been ignored
|
|
*/
|
|
#endif
|
|
/* TINFO="Finish to turn on CAM" */
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_cam_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_CAM_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & CAM_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & CAM_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
#endif
|
|
/* TINFO="Finish to turn off CAM" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on CAM" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & CAM_PWR_STA_MASK)
|
|
!= CAM_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & CAM_PWR_STA_MASK)
|
|
!= CAM_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(CAM_PWR_CON, spm_read(CAM_PWR_CON) | PWR_RST_B);
|
|
}
|
|
INCREASE_STEPS;
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
static int spm_mtcmos_ctrl_vcodec_pwr(int state)
|
|
{
|
|
int err = 0;
|
|
|
|
DBG_ID = DBG_ID_VCODEC_PWR;
|
|
DBG_STA = state;
|
|
DBG_STEP = 0;
|
|
|
|
/* TINFO="enable SPM register control" */
|
|
|
|
if (state == STA_POWER_DOWN) {
|
|
/* TINFO="Start to turn off VCODEC" */
|
|
/* TINFO="Set SRAM_PDN = 1" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) | VCODEC_SRAM_PDN);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until VCODEC_SRAM_PDN_ACK = 1" */
|
|
while ((spm_read(VCODEC_PWR_CON) & VCODEC_SRAM_PDN_ACK)
|
|
!= VCODEC_SRAM_PDN_ACK)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_ISO = 1" */
|
|
spm_write(VCODEC_PWR_CON, spm_read(VCODEC_PWR_CON) | PWR_ISO);
|
|
/* TINFO="Set PWR_CLK_DIS = 1" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) | PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_RST_B = 0" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) & ~PWR_RST_B);
|
|
/* TINFO="Set PWR_ON = 0" */
|
|
spm_write(VCODEC_PWR_CON, spm_read(VCODEC_PWR_CON) & ~PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 0" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) & ~PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 0 and PWR_STATUS_2ND = 0" */
|
|
while ((spm_read(PWR_STATUS) & VCODEC_PWR_STA_MASK)
|
|
|| (spm_read(PWR_STATUS_2ND) & VCODEC_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn off VCODEC" */
|
|
} else { /* STA_POWER_ON */
|
|
/* TINFO="Start to turn on VCODEC" */
|
|
/* TINFO="Set PWR_ON = 1" */
|
|
spm_write(VCODEC_PWR_CON, spm_read(VCODEC_PWR_CON) | PWR_ON);
|
|
/* TINFO="Set PWR_ON_2ND = 1" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) | PWR_ON_2ND);
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until PWR_STATUS = 1 and PWR_STATUS_2ND = 1" */
|
|
while (((spm_read(PWR_STATUS) & VCODEC_PWR_STA_MASK)
|
|
!= VCODEC_PWR_STA_MASK)
|
|
|| ((spm_read(PWR_STATUS_2ND) & VCODEC_PWR_STA_MASK)
|
|
!= VCODEC_PWR_STA_MASK)) {
|
|
/* No logic between pwr_on and pwr_ack.
|
|
* Print SRAM / MTCMOS control and
|
|
* PWR_ACK for debug.
|
|
*/
|
|
ram_console_update();
|
|
}
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Set PWR_CLK_DIS = 0" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) & ~PWR_CLK_DIS);
|
|
/* TINFO="Set PWR_ISO = 0" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) & ~PWR_ISO);
|
|
/* TINFO="Set PWR_RST_B = 1" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) | PWR_RST_B);
|
|
/* TINFO="Set SRAM_PDN = 0" */
|
|
spm_write(VCODEC_PWR_CON,
|
|
spm_read(VCODEC_PWR_CON) & ~(0x1 << 8));
|
|
#ifndef IGNORE_MTCMOS_CHECK
|
|
/* TINFO="Wait until VCODEC_SRAM_PDN_ACK_BIT0 = 0" */
|
|
while (spm_read(VCODEC_PWR_CON)
|
|
& VCODEC_SRAM_PDN_ACK_BIT0)
|
|
ram_console_update();
|
|
/* Need hf_fmm_ck for SRAM PDN delay IP. */
|
|
INCREASE_STEPS;
|
|
#endif
|
|
/* TINFO="Finish to turn on VCODEC" */
|
|
}
|
|
|
|
ram_console_update();
|
|
return err;
|
|
}
|
|
|
|
/* auto-gen end*/
|
|
static int MD1_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_md1_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int MD1_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_md1_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int CONN_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_conn_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int CONN_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_conn_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int DPY_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dpy_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int DPY_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dpy_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int DIS_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dis_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int DIS_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dis_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int MFG_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int MFG_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int ISP_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_isp_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int ISP_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_isp_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int IFR_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_ifr_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int MFG_CORE0_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_core0_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int MFG_ASYNC_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_async_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int CAM_sys_prepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_cam_bus_prot(STA_POWER_ON);
|
|
}
|
|
|
|
static int CAM_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_cam_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int VCODEC_sys_enable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_vcodec_pwr(STA_POWER_ON);
|
|
}
|
|
|
|
static int MD1_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_md1_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int MD1_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_md1_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int CONN_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_conn_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int CONN_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_conn_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int DPY_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dpy_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int DPY_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dpy_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int DIS_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dis_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int DIS_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_dis_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int MFG_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int MFG_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int ISP_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_isp_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int ISP_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_isp_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int IFR_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_ifr_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int MFG_CORE0_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_core0_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int MFG_ASYNC_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_mfg_async_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int CAM_sys_unprepare_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_cam_bus_prot(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int CAM_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_cam_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int VCODEC_sys_disable_op(struct subsys *sys)
|
|
{
|
|
/*pr_debug("[CCF] %s\r\n", __func__); */
|
|
return spm_mtcmos_ctrl_vcodec_pwr(STA_POWER_DOWN);
|
|
}
|
|
|
|
static int sys_get_state_op(struct subsys *sys)
|
|
{
|
|
unsigned int sta = clk_readl(PWR_STATUS);
|
|
unsigned int sta_s = clk_readl(PWR_STATUS_2ND);
|
|
|
|
return (sta & sys->sta_mask) && (sta_s & sys->sta_mask);
|
|
}
|
|
|
|
static struct subsys_ops MD1_sys_ops = {
|
|
.prepare = MD1_sys_prepare_op,
|
|
.unprepare = MD1_sys_unprepare_op,
|
|
.enable = MD1_sys_enable_op,
|
|
.disable = MD1_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops CONN_sys_ops = {
|
|
.prepare = CONN_sys_prepare_op,
|
|
.unprepare = CONN_sys_unprepare_op,
|
|
.enable = CONN_sys_enable_op,
|
|
.disable = CONN_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops DPY_sys_ops = {
|
|
.prepare = DPY_sys_prepare_op,
|
|
.unprepare = DPY_sys_unprepare_op,
|
|
.enable = DPY_sys_enable_op,
|
|
.disable = DPY_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops DIS_sys_ops = {
|
|
.prepare = DIS_sys_prepare_op,
|
|
.unprepare = DIS_sys_unprepare_op,
|
|
.enable = DIS_sys_enable_op,
|
|
.disable = DIS_sys_disable_op,
|
|
/*.get_state = sys_get_state_op,*/
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops MFG_sys_ops = {
|
|
.prepare = MFG_sys_prepare_op,
|
|
.unprepare = MFG_sys_unprepare_op,
|
|
.enable = MFG_sys_enable_op,
|
|
.disable = MFG_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops ISP_sys_ops = {
|
|
.prepare = ISP_sys_prepare_op,
|
|
.unprepare = ISP_sys_unprepare_op,
|
|
.enable = ISP_sys_enable_op,
|
|
.disable = ISP_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops IFR_sys_ops = {
|
|
.prepare = NULL,
|
|
.unprepare = NULL,
|
|
.enable = IFR_sys_enable_op,
|
|
.disable = IFR_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops MFG_CORE0_sys_ops = {
|
|
.prepare = NULL,
|
|
.unprepare = NULL,
|
|
.enable = MFG_CORE0_sys_enable_op,
|
|
.disable = MFG_CORE0_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops MFG_ASYNC_sys_ops = {
|
|
.prepare = NULL,
|
|
.unprepare = NULL,
|
|
.enable = MFG_ASYNC_sys_enable_op,
|
|
.disable = MFG_ASYNC_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops CAM_sys_ops = {
|
|
.prepare = CAM_sys_prepare_op,
|
|
.unprepare = CAM_sys_unprepare_op,
|
|
.enable = CAM_sys_enable_op,
|
|
.disable = CAM_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static struct subsys_ops VCODEC_sys_ops = {
|
|
.prepare = NULL,
|
|
.unprepare = NULL,
|
|
.enable = VCODEC_sys_enable_op,
|
|
.disable = VCODEC_sys_disable_op,
|
|
.get_state = sys_get_state_op,
|
|
};
|
|
|
|
static int subsys_is_on(enum subsys_id id)
|
|
{
|
|
int r;
|
|
struct subsys *sys = id_to_sys(id);
|
|
|
|
if (!sys) {
|
|
WARN_ON(!sys);
|
|
return -EINVAL;
|
|
}
|
|
|
|
r = sys->ops->get_state(sys);
|
|
|
|
#if MT_CCF_DEBUG
|
|
pr_debug("[CCF] %s:%d, sys=%s, id=%d\n", __func__, r, sys->name, id);
|
|
#endif /* MT_CCF_DEBUG */
|
|
|
|
return r;
|
|
}
|
|
|
|
#if CONTROL_LIMIT
|
|
int allow[NR_SYSS] = {
|
|
1, /*SYS_MD1*/
|
|
1, /*SYS_CONN*/
|
|
1, /*SYS_DPY*/
|
|
1, /*SYS_DIS*/
|
|
1, /*SYS_MFG*/
|
|
1, /*SYS_ISP*/
|
|
1, /*SYS_IFR*/
|
|
1, /*SYS_MFG_CORE0*/
|
|
1, /*SYS_MFG_ASYNC*/
|
|
1, /*SYS_CAM*/
|
|
1, /*SYS_VCODEC*/
|
|
};
|
|
#endif
|
|
static int enable_subsys(enum subsys_id id, enum mtcmos_op action)
|
|
{
|
|
int r = 0;
|
|
unsigned long flags;
|
|
struct subsys *sys = id_to_sys(id);
|
|
struct pg_callbacks *pgcb;
|
|
|
|
if (!sys) {
|
|
WARN_ON(!sys);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!mtk_is_mtcmos_enable()) {
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] skip %s: sys=%s, id=%d\n",
|
|
__func__, sys->name, id);
|
|
#endif
|
|
switch (id) {
|
|
case SYS_MD1:
|
|
spm_mtcmos_ctrl_md1_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_md1_bus_prot(STA_POWER_ON);
|
|
break;
|
|
case SYS_CONN:
|
|
spm_mtcmos_ctrl_conn_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_conn_bus_prot(STA_POWER_ON);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if CONTROL_LIMIT
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s: sys=%s, id=%d, action = %s\n",
|
|
__func__, sys->name, id, action?"PWN":"BUS_PROT");
|
|
#endif
|
|
if (allow[id] == 0) {
|
|
#if MT_CCF_DEBUG
|
|
pr_debug("[CCF] %s: do nothing return\n", __func__);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
mtk_clk_lock(flags);
|
|
|
|
if (action == MTCMOS_BUS_PROT) {
|
|
if (sys->ops->prepare)
|
|
r = sys->ops->prepare(sys);
|
|
#if MT_CCF_DEBUG
|
|
else
|
|
pr_notice("%s: %s prepare function is NULL\n",
|
|
__func__, sys->name);
|
|
#endif
|
|
} else if (action == MTCMOS_PWR) {
|
|
if (sys->ops->enable)
|
|
r = sys->ops->enable(sys);
|
|
#if MT_CCF_DEBUG
|
|
else
|
|
pr_notice("%s: %s enable function is NULL\n",
|
|
__func__, sys->name);
|
|
#endif
|
|
}
|
|
|
|
WARN_ON(r);
|
|
|
|
mtk_clk_unlock(flags);
|
|
|
|
if (action == MTCMOS_BUS_PROT) {
|
|
list_for_each_entry(pgcb, &pgcb_list, list) {
|
|
if (pgcb->after_on)
|
|
pgcb->after_on(id);
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static int disable_subsys(enum subsys_id id, enum mtcmos_op action)
|
|
{
|
|
int r = 0;
|
|
unsigned long flags;
|
|
struct subsys *sys = id_to_sys(id);
|
|
struct pg_callbacks *pgcb;
|
|
|
|
if (!sys) {
|
|
WARN_ON(!sys);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!mtk_is_mtcmos_enable()) {
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] skip %s: sys=%s, id=%d\n",
|
|
__func__, sys->name, id);
|
|
#endif
|
|
switch (id) {
|
|
case SYS_MD1:
|
|
spm_mtcmos_ctrl_md1_bus_prot(STA_POWER_DOWN);
|
|
spm_mtcmos_ctrl_md1_pwr(STA_POWER_DOWN);
|
|
break;
|
|
case SYS_CONN:
|
|
spm_mtcmos_ctrl_conn_bus_prot(STA_POWER_DOWN);
|
|
spm_mtcmos_ctrl_conn_pwr(STA_POWER_DOWN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if CONTROL_LIMIT
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s: sys=%s, id=%d, action = %s\n",
|
|
__func__, sys->name, id, action?"PWN":"BUS_PROT");
|
|
#endif
|
|
if (allow[id] == 0) {
|
|
#if MT_CCF_DEBUG
|
|
pr_debug("[CCF] %s: do nothing return\n", __func__);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* TODO: check all clocks related to this subsys are off */
|
|
/* could be power off or not */
|
|
if (action == MTCMOS_BUS_PROT) {
|
|
list_for_each_entry_reverse(pgcb, &pgcb_list, list) {
|
|
if (pgcb->before_off)
|
|
pgcb->before_off(id);
|
|
}
|
|
}
|
|
|
|
mtk_clk_lock(flags);
|
|
|
|
if (action == MTCMOS_BUS_PROT) {
|
|
if (sys->ops->unprepare)
|
|
r = sys->ops->unprepare(sys);
|
|
#if MT_CCF_DEBUG
|
|
else
|
|
pr_notice("%s: %s unprepare function is NULL\n",
|
|
__func__, sys->name);
|
|
#endif
|
|
} else if (action == MTCMOS_PWR) {
|
|
if (sys->ops->disable)
|
|
r = sys->ops->disable(sys);
|
|
#if MT_CCF_DEBUG
|
|
else
|
|
pr_notice("%s: %s disable function is NULL\n",
|
|
__func__, sys->name);
|
|
#endif
|
|
}
|
|
|
|
WARN_ON(r);
|
|
|
|
mtk_clk_unlock(flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* power_gate
|
|
*/
|
|
|
|
#define CLK_NUM 10
|
|
struct mt_power_gate {
|
|
struct clk_hw hw;
|
|
struct cg_list *pre_clk1_list;
|
|
struct cg_list *pre_clk2_list;
|
|
enum subsys_id pd_id;
|
|
};
|
|
|
|
#define to_power_gate(_hw) container_of(_hw, struct mt_power_gate, hw)
|
|
|
|
struct cg_list {
|
|
const char *cg[CLK_NUM];
|
|
};
|
|
|
|
static int pg_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct mt_power_gate *pg = to_power_gate(hw);
|
|
|
|
if (!mtk_is_mtcmos_enable())
|
|
return 1;
|
|
else
|
|
return subsys_is_on(pg->pd_id);
|
|
}
|
|
|
|
static int pg_prepare(struct clk_hw *hw)
|
|
{
|
|
struct mt_power_gate *pg = to_power_gate(hw);
|
|
struct subsys *sys = id_to_sys(pg->pd_id);
|
|
unsigned long flags;
|
|
int skip_pg = 0;
|
|
struct clk *clk;
|
|
int ret = 0;
|
|
int i = 0;
|
|
|
|
if (!sys) {
|
|
WARN_ON(!sys);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtk_mtcmos_lock(flags);
|
|
#if CHECK_PWR_ST
|
|
if (sys->ops->get_state(sys) == SUBSYS_PWR_ON)
|
|
skip_pg = 1;
|
|
#endif /* CHECK_PWR_ST */
|
|
|
|
do {
|
|
if (pg->pre_clk1_list == NULL)
|
|
break;
|
|
|
|
clk = pg->pre_clk1_list->cg[i] ?
|
|
__clk_lookup(pg->pre_clk1_list->cg[i]) : NULL;
|
|
|
|
if (clk) {
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret)
|
|
goto fail;
|
|
} else
|
|
break;
|
|
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s 1: sys=%s, pre_clk=%s\n", __func__,
|
|
__clk_get_name(hw->clk),
|
|
pg->pre_clk1_list->cg[i] ?
|
|
pg->pre_clk1_list->cg[i]:NULL);
|
|
#endif /* MT_CCF_DEBUG */
|
|
i++;
|
|
} while (i < CLK_NUM);
|
|
|
|
if (!skip_pg) {
|
|
ret = enable_subsys(pg->pd_id, MTCMOS_PWR);
|
|
if (ret)
|
|
goto fail;
|
|
}
|
|
|
|
i = 0;
|
|
|
|
do {
|
|
if (pg->pre_clk2_list == NULL)
|
|
break;
|
|
|
|
clk = pg->pre_clk2_list->cg[i] ?
|
|
__clk_lookup(pg->pre_clk2_list->cg[i]) : NULL;
|
|
if (clk) {
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret)
|
|
goto fail;
|
|
} else
|
|
break;
|
|
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s 2: sys=%s, pre_clk=%s\n", __func__,
|
|
__clk_get_name(hw->clk),
|
|
pg->pre_clk2_list->cg[i] ?
|
|
pg->pre_clk2_list->cg[i]:NULL);
|
|
#endif /* MT_CCF_DEBUG */
|
|
i++;
|
|
} while (i < CLK_NUM);
|
|
|
|
if (!skip_pg) {
|
|
ret = enable_subsys(pg->pd_id, MTCMOS_BUS_PROT);
|
|
if (ret)
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
mtk_mtcmos_unlock(flags);
|
|
return ret;
|
|
}
|
|
|
|
static void pg_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct mt_power_gate *pg = to_power_gate(hw);
|
|
struct subsys *sys = id_to_sys(pg->pd_id);
|
|
struct clk *clk;
|
|
unsigned long flags;
|
|
int skip_pg = 0;
|
|
int ret = 0;
|
|
int i = 0;
|
|
|
|
if (!sys) {
|
|
WARN_ON(!sys);
|
|
return;
|
|
}
|
|
|
|
mtk_mtcmos_lock(flags);
|
|
#if CHECK_PWR_ST
|
|
if (sys->ops->get_state(sys) == SUBSYS_PWR_DOWN)
|
|
skip_pg = 1;
|
|
#endif /* CHECK_PWR_ST */
|
|
if (!skip_pg) {
|
|
ret = disable_subsys(pg->pd_id, MTCMOS_BUS_PROT);
|
|
if (ret)
|
|
return;
|
|
}
|
|
|
|
do {
|
|
if (pg->pre_clk2_list == NULL)
|
|
break;
|
|
|
|
clk = pg->pre_clk2_list->cg[i] ?
|
|
__clk_lookup(pg->pre_clk2_list->cg[i]) : NULL;
|
|
|
|
if (clk)
|
|
clk_disable_unprepare(clk);
|
|
else
|
|
break;
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s: sys=%s, pre_clk=%s\n", __func__,
|
|
__clk_get_name(hw->clk),
|
|
pg->pre_clk2_list->cg[i] ?
|
|
pg->pre_clk2_list->cg[i]:NULL);
|
|
#endif /* MT_CCF_DEBUG */
|
|
i++;
|
|
} while (i < CLK_NUM);
|
|
|
|
if (!skip_pg)
|
|
disable_subsys(pg->pd_id, MTCMOS_PWR);
|
|
|
|
i = 0;
|
|
do {
|
|
if (pg->pre_clk1_list == NULL)
|
|
break;
|
|
|
|
clk = pg->pre_clk1_list->cg[i] ?
|
|
__clk_lookup(pg->pre_clk1_list->cg[i]) : NULL;
|
|
|
|
if (clk)
|
|
clk_disable_unprepare(clk);
|
|
else
|
|
break;
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s: sys=%s, pre_clk=%s\n", __func__,
|
|
__clk_get_name(hw->clk),
|
|
pg->pre_clk1_list->cg[i] ?
|
|
pg->pre_clk1_list->cg[i]:NULL);
|
|
#endif /* MT_CCF_DEBUG */
|
|
i++;
|
|
} while (i < CLK_NUM);
|
|
mtk_mtcmos_unlock(flags);
|
|
}
|
|
|
|
static const struct clk_ops mt_power_gate_ops = {
|
|
.prepare = pg_prepare,
|
|
.unprepare = pg_unprepare,
|
|
.is_enabled = pg_is_enabled,
|
|
};
|
|
|
|
struct clk *mt_clk_register_power_gate(const char *name,
|
|
const char *parent_name,
|
|
struct cg_list *pre_clk1_list,
|
|
struct cg_list *pre_clk2_list,
|
|
enum subsys_id pd_id)
|
|
{
|
|
struct mt_power_gate *pg;
|
|
struct clk *clk;
|
|
struct clk_init_data init = {};
|
|
|
|
pg = kzalloc(sizeof(*pg), GFP_KERNEL);
|
|
if (!pg)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.flags = CLK_IGNORE_UNUSED;
|
|
init.parent_names = parent_name ? &parent_name : NULL;
|
|
init.num_parents = parent_name ? 1 : 0;
|
|
init.ops = &mt_power_gate_ops;
|
|
|
|
pg->pre_clk1_list = pre_clk1_list;
|
|
pg->pre_clk2_list = pre_clk2_list;
|
|
pg->pd_id = pd_id;
|
|
pg->hw.init = &init;
|
|
|
|
clk = clk_register(NULL, &pg->hw);
|
|
if (IS_ERR(clk))
|
|
kfree(pg);
|
|
|
|
return clk;
|
|
}
|
|
|
|
#define pg_md1 "pg_md1"
|
|
#define pg_conn "pg_conn"
|
|
#define pg_dpy "pg_dpy"
|
|
#define pg_dis "pg_dis"
|
|
#define pg_mfg "pg_mfg"
|
|
#define pg_isp "pg_isp"
|
|
#define pg_ifr "pg_ifr"
|
|
#define pg_mfg_core0 "pg_mfg_core0"
|
|
#define pg_mfg_async "pg_mfg_async"
|
|
#define pg_cam "pg_cam"
|
|
#define pg_vcodec "pg_vcodec"
|
|
|
|
struct cg_list mm_cg1 = {.cg = {"mm_sel"},};
|
|
|
|
struct cg_list mm_cg2 = {
|
|
.cg = {
|
|
"mm_smi_common",
|
|
"mm_smi_comm0",
|
|
"mm_smi_comm1",
|
|
"mm_smi_larb0"
|
|
},
|
|
};
|
|
|
|
struct cg_list mfg_cg = {.cg = {"mfg_sel"},};
|
|
|
|
struct cg_list isp_cg = {
|
|
.cg = {
|
|
"img_larb2",
|
|
"mm_smi_img_ck"
|
|
},
|
|
};
|
|
|
|
struct cg_list cam_cg = {
|
|
.cg = {
|
|
"cam_larb3",
|
|
"cam_dfp_vad",
|
|
"cam",
|
|
"cam_ccu",
|
|
"mm_smi_cam_ck"
|
|
},
|
|
};
|
|
|
|
struct mtk_power_gate {
|
|
int id;
|
|
const char *name;
|
|
const char *parent_name;
|
|
enum subsys_id pd_id;
|
|
struct cg_list *pre_clk1_names;
|
|
struct cg_list *pre_clk2_names;
|
|
};
|
|
|
|
#define PGATE(_id, _name, _parent, _pre_clk, _pd_id) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.parent_name = _parent, \
|
|
.pre_clk_name = _pre_clk, \
|
|
.pd_id = _pd_id, \
|
|
}
|
|
|
|
#define PGATE2(_id, _name, _parent, _pre_clks1, _pre_clks2, _pd_id) { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.parent_name = _parent, \
|
|
.pd_id = _pd_id, \
|
|
.pre_clk1_names = _pre_clks1, \
|
|
.pre_clk2_names = _pre_clks2, \
|
|
}
|
|
|
|
/* FIXME: all values needed to be verified */
|
|
struct mtk_power_gate scp_clks[] __initdata = {
|
|
PGATE2(SCP_SYS_MD1, pg_md1, NULL, NULL, NULL, SYS_MD1),
|
|
PGATE2(SCP_SYS_CONN, pg_conn, NULL, NULL, NULL, SYS_CONN),
|
|
PGATE2(SCP_SYS_DPY, pg_dpy, NULL, NULL, NULL, SYS_DPY),
|
|
PGATE2(SCP_SYS_DIS, pg_dis, NULL, &mm_cg1, &mm_cg2, SYS_DIS),
|
|
PGATE2(SCP_SYS_MFG, pg_mfg, pg_mfg_async, NULL, NULL, SYS_MFG),
|
|
PGATE2(SCP_SYS_ISP, pg_isp, pg_dis, NULL, &isp_cg, SYS_ISP),
|
|
PGATE2(SCP_SYS_IFR, pg_ifr, NULL, NULL, NULL, SYS_IFR),
|
|
PGATE2(SCP_SYS_MFG_CORE0, pg_mfg_core0, pg_mfg,
|
|
NULL, NULL, SYS_MFG_CORE0),
|
|
PGATE2(SCP_SYS_MFG_ASYNC, pg_mfg_async, NULL,
|
|
&mfg_cg, NULL, SYS_MFG_ASYNC),
|
|
PGATE2(SCP_SYS_CAM, pg_cam, pg_dis, NULL, &cam_cg, SYS_CAM),
|
|
PGATE2(SCP_SYS_VCODEC, pg_vcodec, pg_dis, NULL, NULL, SYS_VCODEC),
|
|
};
|
|
|
|
static int init_clk_scpsys(struct clk_onecell_data *clk_data)
|
|
{
|
|
struct clk *clk;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(scp_clks); i++) {
|
|
struct mtk_power_gate *pg = &scp_clks[i];
|
|
|
|
if (mtk_is_mtcmos_enable())
|
|
clk = mt_clk_register_power_gate(pg->name,
|
|
pg->parent_name, pg->pre_clk1_names,
|
|
pg->pre_clk2_names, pg->pd_id);
|
|
else
|
|
clk = mt_clk_register_power_gate(pg->name,
|
|
pg->parent_name, NULL,
|
|
NULL, pg->pd_id);
|
|
|
|
if (IS_ERR(clk)) {
|
|
pr_err("[CCF] %s: Failed to register clk %s: %ld\n",
|
|
__func__, pg->name, PTR_ERR(clk));
|
|
continue;
|
|
}
|
|
|
|
if (clk_data)
|
|
clk_data->clks[pg->id] = clk;
|
|
|
|
#if MT_CCF_DEBUG
|
|
pr_notice("[CCF] %s: pgate %3d: %s\n", __func__, i, pg->name);
|
|
#endif /* MT_CCF_DEBUG */
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* device tree support
|
|
*/
|
|
|
|
/* TODO: remove this function */
|
|
static struct clk_onecell_data *alloc_clk_data(unsigned int clk_num)
|
|
{
|
|
int i;
|
|
struct clk_onecell_data *clk_data;
|
|
|
|
clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
|
|
if (!clk_data)
|
|
return NULL;
|
|
|
|
clk_data->clks = kcalloc(clk_num, sizeof(struct clk *), GFP_KERNEL);
|
|
if (!clk_data->clks) {
|
|
kfree(clk_data);
|
|
return NULL;
|
|
}
|
|
|
|
clk_data->clk_num = clk_num;
|
|
|
|
for (i = 0; i < clk_num; ++i)
|
|
clk_data->clks[i] = ERR_PTR(-ENOENT);
|
|
|
|
return clk_data;
|
|
}
|
|
|
|
/* TODO: remove this function */
|
|
static void __iomem *get_reg(struct device_node *np, int index)
|
|
{
|
|
#if DUMMY_REG_TEST
|
|
return kzalloc(PAGE_SIZE, GFP_KERNEL);
|
|
#else
|
|
return of_iomap(np, index);
|
|
#endif
|
|
}
|
|
|
|
static int clk_mt6765_scpsys_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct clk_onecell_data *clk_data;
|
|
int ret = 0;
|
|
|
|
pr_notice("%s: start\n", __func__);
|
|
|
|
infracfg_base = get_reg(node, 0);
|
|
spm_base = get_reg(node, 1);
|
|
smi_common_base = get_reg(node, 2);
|
|
infra_base = get_reg(node, 3);
|
|
conn_base = get_reg(node, 4);
|
|
conn_mcu_base = get_reg(node, 5);
|
|
|
|
if (!infracfg_base || !spm_base || !smi_common_base || !infra_base ||
|
|
!conn_base || !conn_mcu_base) {
|
|
pr_err("clk-mt6765-scpsys: missing reg\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk_data = alloc_clk_data(SCP_NR_SYSS);
|
|
if (!clk_data)
|
|
return -ENOMEM;
|
|
|
|
init_clk_scpsys(clk_data);
|
|
|
|
ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
|
|
if (ret) {
|
|
kfree(clk_data);
|
|
pr_err("[CCF] %s:could not register clock provide\n",
|
|
__func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
if (mtk_is_mtcmos_enable()) {
|
|
/* subsys init: per modem owner request,
|
|
*disable modem power first
|
|
*/
|
|
disable_subsys(SYS_MD1, MTCMOS_PWR);
|
|
} else { /*power on all subsys for bring up */
|
|
#ifndef CONFIG_FPGA_EARLY_PORTING
|
|
spm_mtcmos_ctrl_md1_bus_prot(STA_POWER_DOWN);/*do after ccif*/
|
|
spm_mtcmos_ctrl_md1_pwr(STA_POWER_DOWN);/*do after ccif*/
|
|
spm_mtcmos_ctrl_conn_bus_prot(STA_POWER_DOWN);
|
|
spm_mtcmos_ctrl_conn_pwr(STA_POWER_DOWN);
|
|
spm_mtcmos_ctrl_dpy_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_dpy_bus_prot(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_dis_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_dis_bus_prot(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_isp_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_isp_bus_prot(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_ifr_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_mfg_async_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_mfg_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_mfg_bus_prot(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_mfg_core0_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_cam_pwr(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_cam_bus_prot(STA_POWER_ON);
|
|
spm_mtcmos_ctrl_vcodec_pwr(STA_POWER_ON);
|
|
#endif
|
|
}
|
|
|
|
pr_notice("%s done(%d)\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id of_match_clk_mt6765_scpsys[] = {
|
|
{ .compatible = "mediatek,mt6765-scpsys", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver clk_mt6765_scpsys_drv = {
|
|
.probe = clk_mt6765_scpsys_probe,
|
|
.driver = {
|
|
.name = "clk-mt6765-scpsys",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_clk_mt6765_scpsys,
|
|
},
|
|
};
|
|
|
|
static int __init clk_mt6765_scpsys_init(void)
|
|
{
|
|
return platform_driver_register(&clk_mt6765_scpsys_drv);
|
|
}
|
|
|
|
static void __exit clk_mt6765_scpsys_exit(void)
|
|
{
|
|
}
|
|
|
|
arch_initcall(clk_mt6765_scpsys_init);
|
|
module_exit(clk_mt6765_scpsys_exit);
|
|
MODULE_LICENSE("GPL");
|