162 lines
3.8 KiB
C
Executable file
162 lines
3.8 KiB
C
Executable file
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Raspberry Pi voltage sensor driver
|
|
*
|
|
* Based on firmware/raspberrypi.c by Noralf Trønnes
|
|
*
|
|
* Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <soc/bcm2835/raspberrypi-firmware.h>
|
|
|
|
#define UNDERVOLTAGE_STICKY_BIT BIT(16)
|
|
|
|
struct rpi_hwmon_data {
|
|
struct device *hwmon_dev;
|
|
struct rpi_firmware *fw;
|
|
u32 last_throttled;
|
|
struct delayed_work get_values_poll_work;
|
|
};
|
|
|
|
static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data)
|
|
{
|
|
u32 new_uv, old_uv, value;
|
|
int ret;
|
|
|
|
/* Request firmware to clear sticky bits */
|
|
value = 0xffff;
|
|
|
|
ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
|
|
&value, sizeof(value));
|
|
if (ret) {
|
|
dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n",
|
|
ret);
|
|
return;
|
|
}
|
|
|
|
new_uv = value & UNDERVOLTAGE_STICKY_BIT;
|
|
old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT;
|
|
data->last_throttled = value;
|
|
|
|
if (new_uv == old_uv)
|
|
return;
|
|
|
|
if (new_uv)
|
|
dev_crit(data->hwmon_dev, "Undervoltage detected!\n");
|
|
else
|
|
dev_info(data->hwmon_dev, "Voltage normalised\n");
|
|
|
|
sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm");
|
|
}
|
|
|
|
static void get_values_poll(struct work_struct *work)
|
|
{
|
|
struct rpi_hwmon_data *data;
|
|
|
|
data = container_of(work, struct rpi_hwmon_data,
|
|
get_values_poll_work.work);
|
|
|
|
rpi_firmware_get_throttled(data);
|
|
|
|
/*
|
|
* We can't run faster than the sticky shift (100ms) since we get
|
|
* flipping in the sticky bits that are cleared.
|
|
*/
|
|
schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
|
|
}
|
|
|
|
static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct rpi_hwmon_data *data = dev_get_drvdata(dev);
|
|
|
|
*val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT);
|
|
return 0;
|
|
}
|
|
|
|
static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
return 0444;
|
|
}
|
|
|
|
static const u32 rpi_in_config[] = {
|
|
HWMON_I_LCRIT_ALARM,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info rpi_in = {
|
|
.type = hwmon_in,
|
|
.config = rpi_in_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *rpi_info[] = {
|
|
&rpi_in,
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops rpi_hwmon_ops = {
|
|
.is_visible = rpi_is_visible,
|
|
.read = rpi_read,
|
|
};
|
|
|
|
static const struct hwmon_chip_info rpi_chip_info = {
|
|
.ops = &rpi_hwmon_ops,
|
|
.info = rpi_info,
|
|
};
|
|
|
|
static int rpi_hwmon_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct rpi_hwmon_data *data;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
/* Parent driver assure that firmware is correct */
|
|
data->fw = dev_get_drvdata(dev->parent);
|
|
|
|
data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
|
|
data,
|
|
&rpi_chip_info,
|
|
NULL);
|
|
|
|
INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll);
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
if (!PTR_ERR_OR_ZERO(data->hwmon_dev))
|
|
schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
|
|
|
|
return PTR_ERR_OR_ZERO(data->hwmon_dev);
|
|
}
|
|
|
|
static int rpi_hwmon_remove(struct platform_device *pdev)
|
|
{
|
|
struct rpi_hwmon_data *data = platform_get_drvdata(pdev);
|
|
|
|
cancel_delayed_work_sync(&data->get_values_poll_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rpi_hwmon_driver = {
|
|
.probe = rpi_hwmon_probe,
|
|
.remove = rpi_hwmon_remove,
|
|
.driver = {
|
|
.name = "raspberrypi-hwmon",
|
|
},
|
|
};
|
|
module_platform_driver(rpi_hwmon_driver);
|
|
|
|
MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
|
|
MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:raspberrypi-hwmon");
|