c05564c4d8
Android 13
2023 lines
50 KiB
C
Executable file
2023 lines
50 KiB
C
Executable file
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019 MediaTek Inc.
|
|
*/
|
|
|
|
/*
|
|
*
|
|
* Filename:
|
|
* ---------
|
|
* mtk_pe4.c
|
|
*
|
|
* Project:
|
|
* --------
|
|
* Android_Software
|
|
*
|
|
* Description:
|
|
* ------------
|
|
* This Module defines functions of Battery charging
|
|
*
|
|
* Author:
|
|
* -------
|
|
* Wy Chuang
|
|
*
|
|
*/
|
|
#include <linux/init.h> /* For init/exit macros */
|
|
#include <linux/module.h> /* For MODULE_ marcros */
|
|
#include <linux/fs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/pm_wakeup.h>
|
|
#include <linux/time.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/reboot.h>
|
|
|
|
#include "mtk_pe4.h"
|
|
#include "mtk_charger_algorithm_class.h"
|
|
|
|
#define PE40_VBUS_STEP 50
|
|
#define PE40_MIN_WATT 5000000
|
|
#define PE40_VBUS_IR_DROP_THRESHOLD 1200
|
|
|
|
static int pe4_dbg_level = PE4_DEBUG_LEVEL;
|
|
|
|
int pe4_get_debug_level(void)
|
|
{
|
|
return pe4_dbg_level;
|
|
}
|
|
|
|
void mtk_pe40_reset(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe40;
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
|
|
if (pe40->state == PE4_RUN || pe40->state == PE4_INIT ||
|
|
pe40->state == PE4_TUNING || pe40->state == PE4_POSTCC) {
|
|
pe4_hal_set_adapter_cap_end(alg, 5000, 2000);
|
|
|
|
pe4_hal_set_mivr(alg, CHG1, pe40->min_charger_voltage);
|
|
pe4_hal_enable_vbus_ovp(alg, true);
|
|
pe40->polling_interval = 10;
|
|
pe40->state = PE4_HW_READY;
|
|
pe4_err("set TD true\n");
|
|
pe4_hal_enable_termination(alg, CHG1, true);
|
|
if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
pe4_hal_enable_charger(alg, CHG2, false);
|
|
pe4_hal_charger_enable_chip(alg, CHG2, false);
|
|
}
|
|
}
|
|
|
|
pe40->cap.nr = 0;
|
|
pe40->pe4_input_current_limit = -1;
|
|
pe40->pe4_input_current_limit_setting = -1;
|
|
pe40->max_vbus = pe40->pe40_max_vbus;
|
|
pe40->max_ibus = pe40->pe40_max_ibus;
|
|
pe40->max_charger_ibus = pe40->pe40_max_ibus *
|
|
(100 - pe40->ibus_err) / 100;
|
|
}
|
|
|
|
|
|
static int _pe4_init_algo(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int cnt;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
pe4_dbg("%s\n", __func__);
|
|
|
|
mutex_lock(&pe4->access_lock);
|
|
if (pe4_hal_init_hardware(alg) != 0) {
|
|
pe4->state = PE4_HW_FAIL;
|
|
pe4_err("%s:init hw fail\n", __func__);
|
|
} else
|
|
pe4->state = PE4_HW_READY;
|
|
mtk_pe40_reset(alg);
|
|
|
|
if (alg->config == DUAL_CHARGERS_IN_PARALLEL) {
|
|
pe4_err("%s does not support DUAL_CHARGERS_IN_PARALLEL\n",
|
|
__func__);
|
|
alg->config = SINGLE_CHARGER;
|
|
} else if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
cnt = pe4_hal_get_charger_cnt(alg);
|
|
if (cnt == 2)
|
|
alg->config = DUAL_CHARGERS_IN_SERIES;
|
|
else
|
|
alg->config = SINGLE_CHARGER;
|
|
} else
|
|
alg->config = SINGLE_CHARGER;
|
|
mutex_unlock(&pe4->access_lock);
|
|
return 0;
|
|
}
|
|
|
|
static char *pe4_state_to_str(int state)
|
|
{
|
|
switch (state) {
|
|
case PE4_HW_UNINIT:
|
|
return "PE4_HW_UNINIT";
|
|
case PE4_HW_FAIL:
|
|
return "PE4_HW_FAIL";
|
|
case PE4_HW_READY:
|
|
return "PE4_HW_READY";
|
|
case PE4_TA_NOT_SUPPORT:
|
|
return "PE4_TA_NOT_SUPPORT";
|
|
case PE4_RUN:
|
|
return "PE4_RUN";
|
|
case PE4_TUNING:
|
|
return "PE4_TUNING";
|
|
case PE4_POSTCC:
|
|
return "PE4_POSTCC";
|
|
case PE4_INIT:
|
|
return "PE4_INIT";
|
|
default:
|
|
break;
|
|
}
|
|
pe4_err("%s unknown state:%d\n", __func__
|
|
, state);
|
|
return "PE4_UNKNOWN";
|
|
}
|
|
|
|
static int _pe4_is_algo_ready(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int ret_value, uisoc;
|
|
int ret, tmp;
|
|
int oldstate;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
mutex_lock(&pe4->access_lock);
|
|
__pm_stay_awake(pe4->suspend_lock);
|
|
oldstate = pe4->state;
|
|
|
|
switch (pe4->state) {
|
|
case PE4_HW_UNINIT:
|
|
case PE4_HW_FAIL:
|
|
ret_value = ALG_INIT_FAIL;
|
|
break;
|
|
case PE4_INIT:
|
|
case PE4_HW_READY:
|
|
uisoc = pe4_hal_get_uisoc(alg);
|
|
ret = pe4_hal_is_pd_adapter_ready(alg);
|
|
ret_value = ret;
|
|
if (ret == ALG_READY) {
|
|
uisoc = pe4_hal_get_uisoc(alg);
|
|
tmp = pe4_hal_get_battery_temperature(alg);
|
|
pe4_err("c:%d,%d uisoc:%d,%d tmp:%d,%d,%d\n",
|
|
pe4->input_current_limit1,
|
|
pe4->charging_current_limit1,
|
|
uisoc,
|
|
pe4->pe40_stop_battery_soc,
|
|
tmp,
|
|
pe4->high_temp_to_enter_pe40,
|
|
pe4->low_temp_to_enter_pe40);
|
|
if (pe4->input_current_limit1 != -1 ||
|
|
pe4->charging_current_limit1 != -1 ||
|
|
pe4->input_current_limit2 != -1 ||
|
|
pe4->charging_current_limit2 != -1 ||
|
|
uisoc > pe4->pe40_stop_battery_soc ||
|
|
uisoc == -1 ||
|
|
tmp > pe4->high_temp_to_enter_pe40 ||
|
|
tmp < pe4->low_temp_to_enter_pe40)
|
|
ret_value = ALG_NOT_READY;
|
|
} else if (ret == ALG_TA_NOT_SUPPORT)
|
|
pe4->state = PE4_TA_NOT_SUPPORT;
|
|
break;
|
|
case PE4_TA_NOT_SUPPORT:
|
|
ret_value = ALG_TA_NOT_SUPPORT;
|
|
break;
|
|
case PE4_RUN:
|
|
case PE4_TUNING:
|
|
case PE4_POSTCC:
|
|
ret_value = ALG_RUNNING;
|
|
break;
|
|
default:
|
|
ret_value = ALG_INIT_FAIL;
|
|
break;
|
|
}
|
|
|
|
pe4_dbg("%s state:%s=>%s ret:%d\n", __func__,
|
|
pe4_state_to_str(oldstate),
|
|
pe4_state_to_str(pe4->state),
|
|
ret_value);
|
|
|
|
|
|
__pm_relax(pe4->suspend_lock);
|
|
mutex_unlock(&pe4->access_lock);
|
|
|
|
return ret_value;
|
|
}
|
|
|
|
void mtk_pe40_init_cap(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
pe4_hal_get_adapter_cap(alg, &pe4->cap);
|
|
}
|
|
|
|
int mtk_pe40_get_setting_by_watt(struct chg_alg_device *alg, int *voltage,
|
|
int *adapter_ibus, int *actual_current, int watt,
|
|
int *ibus_current_setting)
|
|
{
|
|
int i = 0;
|
|
struct mtk_pe40 *pe40;
|
|
struct pe4_power_cap *pe40_cap;
|
|
int vbus = 0, ibus = 0, ibus_setting = 0;
|
|
int idx = 0, ta_ibus = 0;
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
|
|
pe40_cap = &pe40->cap;
|
|
|
|
pe4_dbg("%s cv:%d icl:%d:%d:%d:%d, watt:%d pdp:%d,%d\n",
|
|
__func__,
|
|
pe40->cv,
|
|
pe40->input_current_limit1,
|
|
pe40->input_current_limit2,
|
|
pe40->pe4_input_current_limit,
|
|
pe40->pe4_input_current_limit_setting,
|
|
watt,
|
|
pe40_cap->pwr_limit[i],
|
|
pe40_cap->pdp);
|
|
|
|
|
|
for (i = 0; i < pe40_cap->nr; i++) {
|
|
int max_ibus = 0;
|
|
int max_vbus = 0;
|
|
|
|
/* update upper bound */
|
|
if (pe40_cap->ma[i] > pe40->max_ibus)
|
|
max_ibus = pe40->max_ibus;
|
|
else
|
|
max_ibus = pe40_cap->ma[i];
|
|
pe4_err("1.%d %d %d %d\n",
|
|
pe40_cap->ma[i],
|
|
pe40->max_ibus,
|
|
max_ibus,
|
|
pe40->pe40_max_ibus);
|
|
|
|
if (pe40->input_current_limit1 != -1 &&
|
|
max_ibus > pe40->input_current_limit1 / 1000)
|
|
max_ibus = pe40->input_current_limit1 / 1000;
|
|
|
|
pe4_err("2.%d %d\n",
|
|
pe40->input_current_limit1,
|
|
max_ibus);
|
|
|
|
if (pe40->pe4_input_current_limit != -1 &&
|
|
max_ibus > (pe40->pe4_input_current_limit / 1000))
|
|
max_ibus = pe40->pe4_input_current_limit / 1000;
|
|
|
|
pe4_err("3.%d %d\n",
|
|
pe40->pe4_input_current_limit,
|
|
max_ibus);
|
|
|
|
|
|
pe40->max_charger_ibus = max_ibus *
|
|
(100 - pe40->ibus_err) / 100;
|
|
|
|
pe4_err("idx:%d nr:%d mV:%d:%d mA:%d\n",
|
|
i,
|
|
pe40_cap->nr,
|
|
pe40_cap->max_mv[i],
|
|
pe40_cap->min_mv[i],
|
|
pe40_cap->ma[i]);
|
|
|
|
pe4_err("ibus:%d %d err:%d\n",
|
|
pe40->max_charger_ibus,
|
|
max_ibus,
|
|
pe40->ibus_err);
|
|
|
|
|
|
if (pe40_cap->max_mv[i] > pe40->max_vbus)
|
|
max_vbus = pe40->max_vbus;
|
|
else
|
|
max_vbus = pe40_cap->max_mv[i];
|
|
|
|
if (*voltage != 0 && *voltage <= max_vbus &&
|
|
*voltage >= pe40_cap->min_mv[i]) {
|
|
ibus = watt / *voltage;
|
|
vbus = *voltage;
|
|
ibus_setting = max_ibus;
|
|
ta_ibus = pe40_cap->ma[i];
|
|
if (ibus <= max_ibus) {
|
|
idx = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* is 5v ok ? */
|
|
if (max_vbus >= 5000 &&
|
|
pe40_cap->min_mv[i] <= 5000 &&
|
|
5000 * pe40->max_charger_ibus >= watt) {
|
|
vbus = 5000;
|
|
ibus = watt / 5000;
|
|
ibus_setting = max_ibus;
|
|
ta_ibus = pe40_cap->ma[i];
|
|
idx = 2;
|
|
break;
|
|
}
|
|
|
|
/* is power limit set */
|
|
if (pe40_cap->pwr_limit[i] && pe40_cap->pdp > 0) {
|
|
if (watt > pe40_cap->pdp * 1000000)
|
|
watt = pe40_cap->pdp * 1000000;
|
|
|
|
if (max_vbus * (pe40->max_charger_ibus - 200) >= watt) {
|
|
ibus = pe40->max_charger_ibus - 200;
|
|
vbus = watt / ibus;
|
|
ibus_setting = max_ibus;
|
|
ta_ibus = pe40_cap->ma[i];
|
|
if (vbus > max_vbus)
|
|
vbus = max_vbus;
|
|
if (vbus < pe40_cap->min_mv[i])
|
|
vbus = pe40_cap->min_mv[i];
|
|
|
|
idx = 4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* is max watt ok */
|
|
if (max_vbus * (pe40->max_charger_ibus - 200) >= watt &&
|
|
!pe40_cap->pwr_limit[i]) {
|
|
ibus = pe40->max_charger_ibus - 200;
|
|
vbus = watt / ibus;
|
|
ibus_setting = max_ibus;
|
|
ta_ibus = pe40_cap->ma[i];
|
|
if (vbus < pe40_cap->min_mv[i])
|
|
vbus = pe40_cap->min_mv[i];
|
|
|
|
idx = 3;
|
|
break;
|
|
}
|
|
|
|
vbus = max_vbus;
|
|
ibus = pe40->max_charger_ibus;
|
|
ibus_setting = max_ibus;
|
|
ta_ibus = pe40_cap->ma[i];
|
|
idx = 5;
|
|
|
|
}
|
|
|
|
*voltage = vbus;
|
|
*ibus_current_setting = ibus_setting;
|
|
*actual_current = ibus;
|
|
*adapter_ibus = ta_ibus;
|
|
|
|
pe4_err("%s:[%d,%d]%d vbus:%d ibus:%d aicl:%d current:%d %d\n",
|
|
__func__,
|
|
idx, i,
|
|
watt, *voltage,
|
|
*adapter_ibus,
|
|
*ibus_current_setting,
|
|
ibus, pe40->max_charger_ibus);
|
|
|
|
return idx;
|
|
}
|
|
|
|
int mtk_pe40_pd_1st_request(struct chg_alg_device *alg,
|
|
int adapter_mv, int adapter_ma, int ma)
|
|
{
|
|
unsigned int oldmA = 3000000;
|
|
int ret;
|
|
int mivr;
|
|
// bool chg2_enable = false;
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (is_dual_charger_supported(pinfo))
|
|
charger_dev_is_enabled(pinfo->chg2_dev, &chg2_enable);
|
|
#endif
|
|
|
|
mivr = pe4->min_charger_voltage / 1000;
|
|
pe4_hal_set_mivr(alg, CHG1, pe4->min_charger_voltage);
|
|
pe4_hal_get_input_current(alg, CHG1, &oldmA);
|
|
oldmA = oldmA / 1000;
|
|
|
|
pe4_err("pe40_pd_req:vbus:%d ibus:%d input_current:%d %d\n",
|
|
adapter_mv, adapter_ma, ma, oldmA);
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus && (oldmA * 2 > ma)) {
|
|
if (chg2_enable) {
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000 / 2);
|
|
charger_dev_set_input_current(pinfo->chg2_dev,
|
|
ma * 1000 / 2);
|
|
} else
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000);
|
|
} else if (pinfo->data.parallel_vbus == false && (oldmA > ma))
|
|
charger_dev_set_input_current(pinfo->chg1_dev, ma * 1000);
|
|
#else
|
|
if (oldmA > ma)
|
|
pe4_hal_set_input_current(alg, CHG1, ma * 1000);
|
|
#endif
|
|
|
|
ret = pe4_hal_1st_set_adapter_cap(alg, adapter_mv, adapter_ma);
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus && (oldmA * 2 < ma)) {
|
|
if (chg2_enable) {
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000 / 2);
|
|
charger_dev_set_input_current(pinfo->chg2_dev,
|
|
ma * 1000 / 2);
|
|
} else
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000);
|
|
} else if (pinfo->data.parallel_vbus == false && (oldmA < ma))
|
|
charger_dev_set_input_current(pinfo->chg1_dev, ma * 1000);
|
|
#else
|
|
if (oldmA < ma)
|
|
pe4_hal_set_input_current(alg, CHG1, ma * 1000);
|
|
#endif
|
|
|
|
if ((adapter_mv - PE40_VBUS_IR_DROP_THRESHOLD) > mivr)
|
|
mivr = adapter_mv - PE40_VBUS_IR_DROP_THRESHOLD;
|
|
|
|
pe4_hal_set_mivr(alg, CHG1, mivr * 1000);
|
|
pe4->pe4_input_current_limit_setting = ma * 1000;
|
|
return ret;
|
|
}
|
|
|
|
int mtk_pe40_pd_request(struct chg_alg_device *alg,
|
|
int *adapter_vbus, int *adapter_ibus, int ma)
|
|
{
|
|
unsigned int oldmA = 3000000;
|
|
unsigned int oldmivr = 4600;
|
|
int ret;
|
|
int mivr;
|
|
int adapter_mv, adapter_ma;
|
|
struct mtk_pe40 *pe40;
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
bool chg2_enable = false;
|
|
|
|
if (is_dual_charger_supported(pinfo))
|
|
charger_dev_is_enabled(pinfo->chg2_dev, &chg2_enable);
|
|
#endif
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
adapter_mv = *adapter_vbus;
|
|
adapter_ma = *adapter_ibus;
|
|
|
|
pe4_hal_get_mivr(alg, CHG1, &oldmivr);
|
|
|
|
mivr = pe40->min_charger_voltage / 1000;
|
|
pe4_hal_set_mivr(alg, CHG1, pe40->min_charger_voltage);
|
|
|
|
pe4_hal_get_input_current(alg, CHG1, &oldmA);
|
|
oldmA = oldmA / 1000;
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus && (oldmA * 2 > ma)) {
|
|
if (chg2_enable) {
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000 / 2);
|
|
charger_dev_set_input_current(pinfo->chg2_dev,
|
|
ma * 1000 / 2);
|
|
} else
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000);
|
|
} else if (pinfo->data.parallel_vbus == false && (oldmA > ma))
|
|
charger_dev_set_input_current(pinfo->chg1_dev, ma * 1000);
|
|
#else
|
|
if (oldmA > ma)
|
|
pe4_hal_set_input_current(alg, CHG1, ma * 1000);
|
|
#endif
|
|
|
|
if (pe40->cap.pdp > 0 &&
|
|
adapter_mv * adapter_ma > pe40->cap.pdp * 1000000) {
|
|
*adapter_ibus = pe40->cap.pdp * 1000000 / adapter_mv;
|
|
pe4_hal_set_input_current(alg, CHG1, *adapter_ibus * 1000);
|
|
}
|
|
|
|
ret = pe4_hal_set_adapter_cap(alg, adapter_mv, *adapter_ibus);
|
|
|
|
pe4_err("%s: vbus:%d ibus:%d ibus2:%d input_current:%d pdp:%d ret:%d\n",
|
|
__func__, adapter_mv, adapter_ma, *adapter_ibus, ma,
|
|
pe40->cap.pdp, ret);
|
|
|
|
if (ret == MTK_ADAPTER_PE4_REJECT) {
|
|
pe4_err("pe40_pd_req: reject\n");
|
|
goto err;
|
|
}
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus && (oldmA * 2 < ma)) {
|
|
if (chg2_enable) {
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000 / 2);
|
|
charger_dev_set_input_current(pinfo->chg2_dev,
|
|
ma * 1000 / 2);
|
|
} else
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000);
|
|
} else if (pinfo->data.parallel_vbus == false && (oldmA < ma))
|
|
charger_dev_set_input_current(pinfo->chg1_dev, ma * 1000);
|
|
#else
|
|
if (oldmA < ma)
|
|
pe4_hal_set_input_current(alg, CHG1, ma * 1000);
|
|
#endif
|
|
|
|
|
|
if ((adapter_mv - PE40_VBUS_IR_DROP_THRESHOLD) > mivr)
|
|
mivr = adapter_mv - PE40_VBUS_IR_DROP_THRESHOLD;
|
|
|
|
pe4_hal_set_mivr(alg, CHG1, mivr * 1000);
|
|
|
|
pe40->pe4_input_current_limit_setting = ma * 1000;
|
|
return ret;
|
|
|
|
err:
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus && (oldmA * 2 > ma)) {
|
|
if (chg2_enable) {
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000 / 2);
|
|
charger_dev_set_input_current(pinfo->chg2_dev,
|
|
ma * 1000 / 2);
|
|
} else
|
|
charger_dev_set_input_current(pinfo->chg1_dev,
|
|
ma * 1000);
|
|
} else if (pinfo->data.parallel_vbus == false && (oldmA > ma))
|
|
charger_dev_set_input_current(pinfo->chg1_dev, ma * 1000);
|
|
#else
|
|
pe4_hal_set_input_current(alg, CHG1, ma * 1000);
|
|
#endif
|
|
|
|
pe4_hal_set_mivr(alg, CHG1, oldmivr);
|
|
return ret;
|
|
}
|
|
|
|
int mtk_pe40_get_ibus(struct chg_alg_device *alg, u32 *ibus)
|
|
{
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
int ret = 0;
|
|
unsigned int chg1_ibus = 0;
|
|
unsigned int chg2_ibus = 0;
|
|
int ibat = 0;
|
|
int chg1_ibat = 0;
|
|
int chg2_ibat = 0;
|
|
int chg2_watt = 0;
|
|
bool is_enable = false;
|
|
|
|
if (is_dual_charger_supported(pinfo) == true)
|
|
charger_dev_is_enabled(pinfo->chg2_dev, &is_enable);
|
|
#endif
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus) {
|
|
ret = charger_dev_get_ibus(pinfo->chg1_dev, &chg1_ibus);
|
|
|
|
if (is_enable) {
|
|
ret = charger_dev_get_ibat(pinfo->chg1_dev, &chg1_ibat);
|
|
if (ret < 0)
|
|
pe4_err("[%s] get ibat fail\n", __func__);
|
|
|
|
ret = charger_dev_get_ibat(pinfo->chg2_dev, &chg2_ibat);
|
|
if (ret < 0) {
|
|
ibat = battery_get_bat_current();
|
|
chg2_ibat = ibat * 100 - chg1_ibat;
|
|
}
|
|
|
|
if (ibat < 0 || chg2_ibat < 0)
|
|
chg2_watt = 0;
|
|
else
|
|
chg2_watt = chg2_ibat / 1000 *
|
|
battery_get_bat_voltage();
|
|
|
|
chg2_ibus = chg2_watt / battery_get_vbus() * 1000;
|
|
}
|
|
*ibus = chg1_ibus + chg2_ibus;
|
|
|
|
pe4_err("[%s] chg2_watt:%d ibat2:%d ibat1:%d ibat:%d ibus1:%d ibus2:%d ibus:%d\n",
|
|
__func__, chg2_watt, chg2_ibat, chg1_ibat, ibat * 100,
|
|
chg1_ibus, chg2_ibus, *ibus);
|
|
} else {
|
|
ret = charger_dev_get_ibus(pinfo->chg1_dev, ibus);
|
|
}
|
|
#endif
|
|
pe4_hal_get_ibus(alg, ibus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pe40_get_init_watt(struct chg_alg_device *alg)
|
|
{
|
|
int ret;
|
|
struct mtk_pe40 *pe40;
|
|
int vbus1, ibus1;
|
|
int vbus2, ibus2;
|
|
int vbat1, vbat2;
|
|
int voltage = 0, input_current = 1000, actual_current = 0;
|
|
int voltage1 = 0, adapter_ibus;
|
|
bool is_enable = false, is_chip_enable = false;
|
|
int i;
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, 27000000, &input_current);
|
|
ret = mtk_pe40_pd_request(alg, &voltage, &adapter_ibus,
|
|
input_current);
|
|
|
|
if (ret != 0 && ret != MTK_ADAPTER_PE4_REJECT) {
|
|
pe4_err("[pe40_i1] err:1 %d\n", ret);
|
|
return -1;
|
|
}
|
|
|
|
for (i = 0; i < 3 ; i++) {
|
|
pe4_hal_dump_registers(alg);
|
|
msleep(100);
|
|
}
|
|
|
|
mtk_pe40_get_ibus(alg, &ibus1);
|
|
vbus1 = pe4_hal_get_vbus(alg);
|
|
ibus1 = ibus1 / 1000;
|
|
vbat1 = pe4_hal_get_vbat(alg);
|
|
voltage1 = voltage;
|
|
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, 15000000, &input_current);
|
|
|
|
|
|
for (i = 0; i < 6 ; i++) {
|
|
ret = mtk_pe40_pd_request(alg, &voltage, &adapter_ibus,
|
|
input_current);
|
|
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_i1] err:2 %d\n", ret);
|
|
return -1;
|
|
}
|
|
|
|
msleep(100);
|
|
mtk_pe40_get_ibus(alg, &ibus2);
|
|
vbus2 = pe4_hal_get_vbus(alg);
|
|
ibus2 = ibus2 / 1000;
|
|
vbat2 = pe4_hal_get_vbat(alg);
|
|
|
|
if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
pe4_hal_is_charger_enable(alg, CHG2, &is_enable);
|
|
is_chip_enable = pe4_hal_is_chip_enable(alg, CHG2);
|
|
}
|
|
|
|
pe4_err("[pe40_vbus] vbus1:%d ibus1:%d vbus2:%d ibus2:%d watt:%d en:%d %d vbat:%d %d\n",
|
|
vbus1, ibus1, vbus2, ibus2, voltage1 * ibus1, is_enable,
|
|
is_chip_enable, vbat1, vbat2);
|
|
}
|
|
|
|
return voltage1 * ibus1;
|
|
}
|
|
|
|
void mtk_pe40_end(struct chg_alg_device *alg, int type)
|
|
{
|
|
mtk_pe40_reset(alg);
|
|
pe4_err("%s: retry:%d\n", __func__, type);
|
|
}
|
|
|
|
int mtk_pe40_init_state(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int ret = 0;
|
|
int vbus1, vbat1, ibus1;
|
|
int vbus2, vbat2, ibus2;
|
|
struct pe4_pps_status cap, cap1, cap2;
|
|
int voltage, adapter_ibus = 1000, actual_current;
|
|
int watt = 0;
|
|
int i;
|
|
int input_current = 0;
|
|
bool chg2_chip_enabled = false;
|
|
int chg_cnt, is_chip_enabled;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
pe4_err("set TD false\n");
|
|
pe4_hal_enable_termination(alg, CHG1, false);
|
|
pe4_hal_enable_vbus_ovp(alg, false);
|
|
|
|
mtk_pe40_init_cap(alg);
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, 5000000, &input_current);
|
|
|
|
ret = mtk_pe40_pd_1st_request(alg, voltage, actual_current,
|
|
actual_current);
|
|
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_i0] err:1 %d\n", ret);
|
|
goto retry;
|
|
}
|
|
|
|
/* disable charger */
|
|
pe4_hal_enable_powerpath(alg, CHG1, false);
|
|
chg_cnt = pe4_hal_get_charger_cnt(alg);
|
|
if (chg_cnt > 1 && alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
for (i = CHG2; i < CHG_MAX; i++) {
|
|
is_chip_enabled = pe4_hal_is_chip_enable(alg, i);
|
|
if (is_chip_enabled) {
|
|
pe4_hal_enable_charger(alg, i, false);
|
|
pe4_hal_charger_enable_chip(alg, i, false);
|
|
}
|
|
}
|
|
}
|
|
msleep(500);
|
|
|
|
cap.output_ma = 0;
|
|
cap.output_mv = 0;
|
|
|
|
ret = pe40_hal_get_adapter_output(alg, &cap);
|
|
|
|
pe4->can_query = true;
|
|
if (ret == 0 && (cap.output_ma == -1 || cap.output_mv == -1))
|
|
pe4->can_query = false;
|
|
else if (ret == 1)
|
|
pe4->can_query = false;
|
|
else if (ret != 0) {
|
|
pe4_err("[pe40_i0] err:2 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pe4_err("[pe40_i0] can_query:%d ret:%d\n",
|
|
pe4->can_query,
|
|
ret);
|
|
|
|
pe4->pmic_vbus = pe4_hal_get_vbus(alg);
|
|
pe4->TA_vbus = cap.output_mv;
|
|
pe4->vbus_cali = pe4->TA_vbus - pe4->pmic_vbus;
|
|
|
|
pe4_err("[pe40_i0]pmic_vbus:%d TA_vbus:%d cali:%d ibus:%d chip2:%d\n",
|
|
pe4->pmic_vbus, pe4->TA_vbus, pe4->vbus_cali,
|
|
cap.output_ma, chg2_chip_enabled);
|
|
|
|
/*enable charger*/
|
|
pe4_hal_enable_powerpath(alg, CHG1, true);
|
|
if (alg->config == SINGLE_CHARGER) {
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->sc_charger_current);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG1, pe4->sc_input_current);
|
|
} else if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->dcs_chg2_charger_current);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG1, pe4->dcs_input_current);
|
|
chg_cnt = pe4_hal_get_charger_cnt(alg);
|
|
if (chg_cnt > 1) {
|
|
for (i = CHG2; i < CHG_MAX; i++) {
|
|
is_chip_enabled =
|
|
pe4_hal_is_chip_enable(alg, i);
|
|
if (is_chip_enabled == false) {
|
|
pe4_hal_charger_enable_chip(
|
|
alg, i, true);
|
|
pe4_hal_enable_charger(alg, i, true);
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG2,
|
|
pe4->dcs_chg2_charger_current);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG2,
|
|
pe4->dcs_chg2_charger_current);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
pe4_hal_dump_registers(alg);
|
|
msleep(100);
|
|
|
|
if (cap.output_ma > 100) {
|
|
pe4_err("[pe40_i0] FOD fail :%d\n", cap.output_ma);
|
|
goto err;
|
|
}
|
|
|
|
if (pe4->can_query == true) {
|
|
/* measure 1 */
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, 5000000, &input_current);
|
|
ret = mtk_pe40_pd_request(alg, &voltage, &actual_current,
|
|
actual_current);
|
|
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_i0] err:3 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
msleep(250);
|
|
vbus1 = pe4_hal_get_vbus(alg);
|
|
vbat1 = pe4_hal_get_vbat(alg);
|
|
mtk_pe40_get_ibus(alg, &ibus1);
|
|
ibus1 = ibus1 / 1000;
|
|
ret = pe40_hal_get_adapter_output(alg, &cap1);
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_i0] err:4 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pe4_err("[pe40_i11]vbus:%d ibus:%d vbat:%d TA_vbus:%d TA_ibus:%d setting:%d %d\n",
|
|
vbus1, ibus1, vbat1,
|
|
cap1.output_mv, cap1.output_ma,
|
|
voltage, actual_current);
|
|
|
|
if (abs(cap1.output_ma - actual_current) < 200)
|
|
break;
|
|
}
|
|
|
|
|
|
/* measure 2 */
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, 7500000, &input_current);
|
|
ret = mtk_pe40_pd_request(alg, &voltage, &actual_current,
|
|
actual_current);
|
|
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_i0] err:5 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
msleep(250);
|
|
vbus2 = pe4_hal_get_vbus(alg);
|
|
vbat2 = pe4_hal_get_vbat(alg);
|
|
mtk_pe40_get_ibus(alg, &ibus2);
|
|
ibus2 = ibus2 / 1000;
|
|
ret = pe40_hal_get_adapter_output(alg, &cap2);
|
|
if (ret != 0)
|
|
goto err;
|
|
|
|
pe4_err("[pe40_i12]vbus:%d ibus:%d vbat:%d TA_vbus:%d TA_ibus:%d setting:%d %d\n",
|
|
vbus2, ibus2, vbat2,
|
|
cap2.output_mv, cap2.output_ma,
|
|
voltage, actual_current);
|
|
if (abs(cap2.output_ma - actual_current) < 200)
|
|
break;
|
|
}
|
|
|
|
pe4_err("[pe40_i1]vbus:%d,%d,%d,%d ibus:%d,%d,%d,%d vbat:%d,%d\n",
|
|
vbus1, vbus2, cap1.output_mv, cap2.output_mv,
|
|
ibus1, ibus2, cap1.output_ma, cap2.output_ma,
|
|
vbat1, vbat2);
|
|
|
|
pe4->r_sw = abs((vbus2 - vbus1) - (vbat2 - vbat1)) * 1000 /
|
|
abs(cap2.output_ma - cap1.output_ma);
|
|
pe4->r_cable = abs((cap2.output_mv - cap1.output_mv) -
|
|
(vbus2 - vbus1)) * 1000 /
|
|
abs(cap2.output_ma - cap1.output_ma);
|
|
pe4->r_cable_2 = abs(cap2.output_mv - pe4->vbus_cali - vbus2)
|
|
* 1000 / abs(cap2.output_ma);
|
|
pe4->r_cable_1 = abs(cap1.output_mv - pe4->vbus_cali - vbus1)
|
|
* 1000 / abs(cap1.output_ma);
|
|
|
|
if (pe4->r_cable_1 < pe4->pe40_r_cable_3a_lower)
|
|
pe4->pe4_input_current_limit = 5000000;
|
|
else if (pe4->r_cable_1 >= pe4->pe40_r_cable_3a_lower &&
|
|
pe4->r_cable_1 < pe4->pe40_r_cable_2a_lower)
|
|
pe4->pe4_input_current_limit = 3000000;
|
|
else if (pe4->r_cable_1 >= pe4->pe40_r_cable_2a_lower &&
|
|
pe4->r_cable_1 < pe4->pe40_r_cable_1a_lower)
|
|
pe4->pe4_input_current_limit = 2000000;
|
|
else if (pe4->r_cable_1 >= pe4->pe40_r_cable_1a_lower)
|
|
pe4->pe4_input_current_limit = 1000000;
|
|
|
|
pe4_err("[pe40_i2]r_sw:%d r_cable:%d r_cable_1:%d r_cable_2:%d pe4_icl:%d\n",
|
|
pe4->r_sw, pe4->r_cable, pe4->r_cable_1,
|
|
pe4->r_cable_2, pe4->pe4_input_current_limit);
|
|
} else
|
|
pe4_err("TA does not support query\n");
|
|
|
|
watt = mtk_pe40_get_init_watt(alg);
|
|
voltage = 0;
|
|
mtk_pe40_get_setting_by_watt(alg, &voltage, &adapter_ibus,
|
|
&actual_current, watt, &input_current);
|
|
pe4->avbus = voltage / 10 * 10;
|
|
ret = mtk_pe40_pd_request(alg, &pe4->avbus, &adapter_ibus,
|
|
input_current);
|
|
|
|
if (ret != 0 && ret != MTK_ADAPTER_PE4_REJECT) {
|
|
pe4_err("[pe40_i0] err:6 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pe4->avbus = voltage;
|
|
pe4->ibus = watt / voltage;
|
|
pe4->watt = watt;
|
|
|
|
pe4->state = PE4_RUN;
|
|
pe4->polling_interval = 10;
|
|
|
|
return 0;
|
|
|
|
retry:
|
|
mtk_pe40_end(alg, 0);
|
|
return 0;
|
|
err:
|
|
mtk_pe40_end(alg, 2);
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pe40_safety_check(struct chg_alg_device *alg)
|
|
{
|
|
int vbus;
|
|
struct mtk_pe40 *pe40;
|
|
struct pe4_pps_status cap;
|
|
//struct pd_status TAstatus = {0,};
|
|
struct pe4_adapter_status TAstatus;
|
|
int ret;
|
|
int tmp;
|
|
int i;
|
|
int high_tmp_cnt = 0;
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
|
|
TAstatus.ocp = 0;
|
|
TAstatus.otp = 0;
|
|
TAstatus.ovp = 0;
|
|
TAstatus.temperature = 0;
|
|
|
|
/* vbus ov */
|
|
vbus = pe4_hal_get_vbus(alg);
|
|
if (vbus - pe40->avbus >= 2000) {
|
|
pe4_err("[pe40_err]vbus ov :vbus:%d avbus:%d\n",
|
|
vbus, pe40->avbus);
|
|
goto err;
|
|
}
|
|
|
|
/* cable voltage drop check */
|
|
if (pe40->can_query == true) {
|
|
ret = pe40_hal_get_adapter_output(alg, &cap);
|
|
if (ret != 0) {
|
|
pe4_err("[pe40_err] err:1 %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
if (cap.output_mv != -1 &&
|
|
(cap.output_mv - vbus) > PE40_VBUS_IR_DROP_THRESHOLD) {
|
|
pe4_err("[pe40_err]vbus ov2 vbus:%d TAvbus:%d %d %d\n",
|
|
vbus, cap.output_mv,
|
|
PE40_VBUS_IR_DROP_THRESHOLD,
|
|
(cap.output_mv - vbus) >
|
|
PE40_VBUS_IR_DROP_THRESHOLD);
|
|
goto err;
|
|
}
|
|
|
|
/* TA V_BUS OVP */
|
|
if (cap.output_mv >= pe40->avbus * 12 / 10) {
|
|
pe4_err("[pe40_err]TA vbus ovp :vbus:%d avbus:%d\n",
|
|
cap.output_mv, pe40->avbus);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
/* TA Thermal */
|
|
for (i = 0; i < 3; i++) {
|
|
ret = pe40_hal_get_adapter_status(alg, &TAstatus);
|
|
if (TAstatus.temperature >= 100 &&
|
|
TAstatus.temperature != 0 &&
|
|
ret != MTK_ADAPTER_PE4_NOT_SUPPORT &&
|
|
ret != MTK_ADAPTER_PE4_TIMEOUT) {
|
|
high_tmp_cnt++;
|
|
pe4_err("[pe40]TA Thermal:%d cnt:%d\n",
|
|
TAstatus.temperature, high_tmp_cnt);
|
|
} else if (ret == MTK_ADAPTER_PE4_TIMEOUT) {
|
|
pe4_err("[pe40]TA adapter_dev_get_status timeout\n");
|
|
goto err;
|
|
} else
|
|
break;
|
|
|
|
if (high_tmp_cnt >= 3) {
|
|
pe4_err("[pe40_err]TA Thermal: %d thd:%d cnt:%d\n",
|
|
TAstatus.temperature, 100, high_tmp_cnt);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
if (ret == MTK_ADAPTER_PE4_NOT_SUPPORT)
|
|
pe4_err("[pe40]TA adapter_dev_get_status not support\n");
|
|
else {
|
|
if (TAstatus.ocp || TAstatus.otp || TAstatus.ovp) {
|
|
|
|
pe4_err("[pe40_err]TA protect: ocp:%d otp:%d ovp:%d\n",
|
|
TAstatus.ocp,
|
|
TAstatus.otp,
|
|
TAstatus.ovp);
|
|
goto err;
|
|
}
|
|
|
|
pe4_err("PD_TA:TA protect: ocp:%d otp:%d ovp:%d tmp:%d\n",
|
|
TAstatus.ocp,
|
|
TAstatus.otp,
|
|
TAstatus.ovp,
|
|
TAstatus.temperature);
|
|
}
|
|
|
|
tmp = pe4_hal_get_battery_temperature(alg);
|
|
|
|
if (tmp > pe40->high_temp_to_leave_pe40 ||
|
|
tmp < pe40->low_temp_to_leave_pe40) {
|
|
|
|
pe4_err("[pe40_err]tmp:%d threshold:%d %d\n",
|
|
tmp, pe40->high_temp_to_leave_pe40,
|
|
pe40->low_temp_to_leave_pe40);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return -1;
|
|
}
|
|
|
|
|
|
int mtk_pe40_cc_state(struct chg_alg_device *alg)
|
|
{
|
|
int ibus = 0, vbat, ibat, vbus, compare_ibus = 0;
|
|
int icl, ccl, ccl2, cv, max_icl;
|
|
struct mtk_pe40 *pe40;
|
|
int ret;
|
|
int oldavbus = 0;
|
|
int oldibus = 0;
|
|
int watt;
|
|
int max_watt;
|
|
// struct charger_data *pdata;
|
|
int actual_current;
|
|
int new_watt = 0;
|
|
int adapter_ibus = 0;
|
|
int input_current = 0;
|
|
int icl_threshold;
|
|
unsigned int mivr1 = 0;
|
|
unsigned int mivr2 = 0;
|
|
bool chg1_mivr = false;
|
|
bool chg2_mivr = false;
|
|
bool chg2_enable = false;
|
|
bool chg2_chip_enable = false;
|
|
bool thermal_skip = false;
|
|
|
|
pe40 = dev_get_drvdata(&alg->dev);
|
|
|
|
vbat = pe4_hal_get_vbat(alg);
|
|
ibat = pe4_hal_get_ibat(alg);
|
|
|
|
mtk_pe40_get_ibus(alg, &ibus);
|
|
ibus = ibus / 1000;
|
|
oldibus = ibus;
|
|
pe4_hal_get_mivr_state(alg, CHG1, &chg1_mivr);
|
|
pe4_hal_get_mivr(alg, CHG1, &mivr1);
|
|
|
|
if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
chg2_chip_enable = pe4_hal_is_chip_enable(alg, CHG2);
|
|
pe4_hal_is_charger_enable(alg, CHG2, &chg2_enable);
|
|
if (chg2_chip_enable) {
|
|
pe4_hal_get_mivr_state(alg, CHG2, &chg2_mivr);
|
|
pe4_hal_get_mivr(alg, CHG2, &mivr2);
|
|
}
|
|
}
|
|
|
|
|
|
vbus = pe4_hal_get_vbus(alg);
|
|
ccl = pe40->charger_current1 / 1000;
|
|
ccl2 = pe40->charger_current1 / 1000;
|
|
cv = pe40->cv / 1000;
|
|
watt = pe40->avbus * ibus;
|
|
|
|
icl = pe40->input_current1 / 1000 *
|
|
(100 - pe40->ibus_err) / 100;
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus) {
|
|
charger_dev_get_ibus(pinfo->chg1_dev, &compare_ibus);
|
|
compare_ibus = compare_ibus / 1000;
|
|
|
|
|
|
if (icl > pe40->max_charger_ibus / 2)
|
|
max_icl = pe40->max_charger_ibus / 2;
|
|
else
|
|
max_icl = icl;
|
|
} else {
|
|
compare_ibus = ibus;
|
|
|
|
if (icl > pe40->max_charger_ibus)
|
|
max_icl = pe40->max_charger_ibus;
|
|
else
|
|
max_icl = icl;
|
|
}
|
|
#else
|
|
compare_ibus = ibus;
|
|
|
|
if (icl > pe40->max_charger_ibus)
|
|
max_icl = pe40->max_charger_ibus;
|
|
else
|
|
max_icl = icl;
|
|
#endif
|
|
|
|
icl_threshold = 100;
|
|
max_watt = pe40->avbus * max_icl;
|
|
|
|
pe4_err("[pe40_cc]vbus:%d:%d,ibus:%d,cibus:%d,ibat:%d icl:%d:%d,ccl:%d,%d,vbat:%d,maxIbus:%d,mivr:%d,%d\n",
|
|
pe40->avbus, vbus,
|
|
ibus,
|
|
compare_ibus,
|
|
ibat,
|
|
icl, max_icl,
|
|
ccl, ccl2,
|
|
vbat, pe40->max_charger_ibus,
|
|
chg1_mivr, chg2_mivr);
|
|
|
|
if ((chg1_mivr && (vbus < mivr1 / 1000 - 500)) ||
|
|
(chg2_mivr && (vbus < mivr2 / 1000 - 500))) {
|
|
mtk_pe40_end(alg, 1);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus) {
|
|
if (pinfo->chg1_data.thermal_input_current_limit != -1 ||
|
|
pinfo->chg2_data.thermal_input_current_limit != -1)
|
|
thermal_skip = true;
|
|
}
|
|
#endif
|
|
|
|
if (((chg1_mivr || chg2_mivr) && !thermal_skip) ||
|
|
((compare_ibus >= (max_icl - icl_threshold)) && !thermal_skip) ||
|
|
(compare_ibus <= (max_icl - icl_threshold * 2))) {
|
|
|
|
oldavbus = pe40->avbus;
|
|
|
|
if (chg1_mivr || chg2_mivr) {
|
|
pe40->avbus = pe40->avbus + 50;
|
|
#ifdef PE4_DUAL_CHARGER_IN_PARALLEL
|
|
if (pinfo->data.parallel_vbus)
|
|
new_watt = (pe40->avbus + 50) * icl * 2;
|
|
else
|
|
new_watt = (pe40->avbus + 50) * icl;
|
|
#else
|
|
new_watt = (pe40->avbus + 50) * icl;
|
|
#endif
|
|
} else if (compare_ibus >= (max_icl - icl_threshold)) {
|
|
pe40->avbus = pe40->avbus + 50;
|
|
new_watt = (pe40->avbus + 50) * ibus;
|
|
} else if (compare_ibus <= (max_icl - icl_threshold * 2)) {
|
|
if (chg2_enable && (mivr2 / 1000 < 5000) &&
|
|
((vbus - 50) < (mivr2 / 1000 + 100)))
|
|
new_watt = watt;
|
|
else {
|
|
new_watt = pe40->avbus * pe40->ibus - 500000;
|
|
pe40->avbus = pe40->avbus - 50;
|
|
}
|
|
}
|
|
|
|
ret = mtk_pe40_get_setting_by_watt(alg, &pe40->avbus,
|
|
&adapter_ibus, &actual_current, new_watt,
|
|
&input_current);
|
|
|
|
if (ibus >= (max_icl - icl_threshold) && ret != 4)
|
|
pe40->polling_interval = 3;
|
|
|
|
|
|
if (pe40->avbus <= 5000)
|
|
pe40->avbus = 5000;
|
|
|
|
if (abs(pe40->avbus - oldavbus) >= 50) {
|
|
ret = mtk_pe40_pd_request(alg, &pe40->avbus,
|
|
&adapter_ibus, input_current);
|
|
if (ret != 0 && ret != MTK_ADAPTER_PE4_REJECT) {
|
|
pe4_err("pe4 end2 error1\n");
|
|
goto err;
|
|
}
|
|
}
|
|
msleep(100);
|
|
|
|
vbat = pe4_hal_get_vbat(alg);
|
|
ibat = pe4_hal_get_ibat(alg);
|
|
mtk_pe40_get_ibus(alg, &ibus);
|
|
vbus = pe4_hal_get_vbat(alg);
|
|
ibus = ibus / 1000;
|
|
icl = pe40->input_current_limit1 / 1000;
|
|
ccl = pe40->charger_current1 / 1000;
|
|
|
|
pe40->watt = pe40->avbus * ibus;
|
|
pe40->vbus = vbus;
|
|
pe40->ibus = ibus;
|
|
} else
|
|
pe40->polling_interval = 10;
|
|
|
|
ret = mtk_pe40_safety_check(alg);
|
|
if (ret == -1) {
|
|
pe4_err("pe4 end2 error2\n");
|
|
goto err;
|
|
}
|
|
if (ret == 1)
|
|
goto disable_hv;
|
|
|
|
if (pe40->avbus * oldibus <= PE40_MIN_WATT) {
|
|
if (pe40->charging_current_limit1 != -1 ||
|
|
pe40->input_current_limit1 != -1)
|
|
mtk_pe40_end(alg, 1);
|
|
|
|
else
|
|
mtk_pe40_end(alg, 1);
|
|
}
|
|
|
|
return 0;
|
|
|
|
disable_hv:
|
|
mtk_pe40_end(alg, 0);
|
|
return 0;
|
|
err:
|
|
mtk_pe40_end(alg, 2);
|
|
return 0;
|
|
}
|
|
|
|
static int pe4_sc_set_charger(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int ichg1_min = -1, aicr1_min = -1;
|
|
int ret;
|
|
int min_icl = 0;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
if (pe4->input_current_limit1 == 0 ||
|
|
pe4->charging_current_limit1 == 0) {
|
|
pe4_err("input/charging current is 0, end Pd\n");
|
|
return -1;
|
|
}
|
|
|
|
mutex_lock(&pe4->data_lock);
|
|
if (pe4->charging_current_limit1 != -1) {
|
|
if (pe4->charging_current_limit1 <
|
|
pe4->sc_charger_current)
|
|
pe4->charger_current1 =
|
|
pe4->charging_current_limit1;
|
|
ret = pe4_hal_get_min_charging_current(alg, CHG1, &ichg1_min);
|
|
if (ret != -ENOTSUPP &&
|
|
pe4->charging_current_limit1 < ichg1_min)
|
|
pe4->charger_current1 = 0;
|
|
} else
|
|
pe4->charger_current1 = pe4->sc_charger_current;
|
|
|
|
min_icl = pe4->sc_input_current;
|
|
if (pe4->pe4_input_current_limit != -1 &&
|
|
pe4->pe4_input_current_limit < min_icl)
|
|
min_icl = pe4->pe4_input_current_limit;
|
|
|
|
if (pe4->pe4_input_current_limit_setting != -1 &&
|
|
pe4->pe4_input_current_limit_setting < min_icl)
|
|
min_icl = pe4->pe4_input_current_limit_setting;
|
|
|
|
if (pe4->input_current_limit1 != -1 &&
|
|
pe4->input_current_limit1 < min_icl) {
|
|
pe4->input_current1 = pe4->input_current_limit1;
|
|
ret = pe4_hal_get_min_input_current(alg, CHG1, &aicr1_min);
|
|
if (ret != -ENOTSUPP && pe4->input_current_limit1 < aicr1_min)
|
|
pe4->input_current1 = 0;
|
|
} else
|
|
pe4->input_current1 = min_icl;
|
|
mutex_unlock(&pe4->data_lock);
|
|
|
|
if (pe4->input_current1 == 0 ||
|
|
pe4->charger_current1 == 0) {
|
|
pe4_err("current is zero %d %d\n",
|
|
pe4->input_current1,
|
|
pe4->charger_current1);
|
|
return -1;
|
|
}
|
|
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->charger_current1);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG1, pe4->input_current1);
|
|
pe4_hal_set_cv(alg,
|
|
CHG1, pe4->cv);
|
|
|
|
pe4_dbg("%s m:%d s:%d cv:%d chg1:%d,%d min:%d:%d\n", __func__,
|
|
alg->config,
|
|
pe4->state,
|
|
pe4->cv,
|
|
pe4->input_current1,
|
|
pe4->charger_current1,
|
|
ichg1_min,
|
|
aicr1_min);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pe4_dcs_set_charger(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
bool chg2_chip_enabled = false;
|
|
int ret;
|
|
int ichg1_min = -1, ichg2_min = -1;
|
|
int aicr1_min = -1;
|
|
int min_icl;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
if (pe4->input_current_limit1 == 0 ||
|
|
pe4->charging_current_limit1 == 0 ||
|
|
pe4->charging_current_limit2 == 0) {
|
|
pr_notice("input/charging current is 0, end PD\n");
|
|
return -1;
|
|
}
|
|
|
|
mutex_lock(&pe4->data_lock);
|
|
min_icl = pe4->dcs_input_current;
|
|
if (pe4->pe4_input_current_limit != -1 &&
|
|
pe4->pe4_input_current_limit < min_icl)
|
|
min_icl = pe4->pe4_input_current_limit;
|
|
|
|
if (pe4->pe4_input_current_limit_setting != -1 &&
|
|
pe4->pe4_input_current_limit_setting < min_icl)
|
|
min_icl = pe4->pe4_input_current_limit_setting;
|
|
|
|
if (pe4->input_current_limit1 != -1 &&
|
|
pe4->input_current_limit1 < min_icl) {
|
|
pe4->input_current1 = pe4->input_current_limit1;
|
|
ret = pe4_hal_get_min_input_current(alg, CHG1, &aicr1_min);
|
|
if (ret != -ENOTSUPP && pe4->input_current_limit1 < aicr1_min)
|
|
pe4->input_current1 = 0;
|
|
} else
|
|
pe4->input_current1 = min_icl;
|
|
|
|
if (pe4->charging_current_limit1 != -1 &&
|
|
pe4->charging_current_limit1 <
|
|
pe4->dcs_chg1_charger_current) {
|
|
pe4->charger_current1 = pe4->charging_current_limit1;
|
|
ret = pe4_hal_get_min_charging_current(alg, CHG1, &ichg1_min);
|
|
if (ret != -ENOTSUPP &&
|
|
pe4->charging_current_limit1 < ichg1_min)
|
|
pe4->charger_current1 = 0;
|
|
} else
|
|
pe4->charger_current1 = pe4->dcs_chg1_charger_current;
|
|
|
|
if (pe4->state == PE4_RUN)
|
|
pe4->charger_current2 = pe4->dcs_chg2_charger_current;
|
|
|
|
if (pe4->charging_current_limit2 != -1 &&
|
|
pe4->charging_current_limit2 <
|
|
pe4->charger_current2) {
|
|
pe4->charger_current2 = pe4->charging_current_limit2;
|
|
ret = pe4_hal_get_min_charging_current(alg, CHG2, &ichg1_min);
|
|
if (ret != -ENOTSUPP &&
|
|
pe4->charging_current_limit2 < ichg1_min)
|
|
pe4->charger_current2 = 0;
|
|
}
|
|
mutex_unlock(&pe4->data_lock);
|
|
|
|
if (pe4->input_current1 == 0 ||
|
|
pe4->charger_current1 == 0 ||
|
|
pe4->charger_current2 == 0) {
|
|
pe4_err("current is zero %d %d %d\n",
|
|
pe4->input_current1,
|
|
pe4->charger_current1,
|
|
pe4->charger_current2);
|
|
pe4_hal_enable_charger(alg, CHG2, false);
|
|
pe4_hal_charger_enable_chip(alg, CHG2, false);
|
|
return -1;
|
|
}
|
|
|
|
chg2_chip_enabled = pe4_hal_is_chip_enable(alg, CHG2);
|
|
pe4_err("chg2_en:%d pe4_state:%d\n",
|
|
chg2_chip_enabled, pe4->state);
|
|
if (pe4->state == PE4_RUN) {
|
|
if (!chg2_chip_enabled)
|
|
pe4_hal_charger_enable_chip(alg, CHG2, true);
|
|
pe4_hal_enable_charger(alg, CHG2, true);
|
|
pe4_hal_set_cv(alg, CHG2, pe4->cv + 200000);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG2, pe4->charger_current2);
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG2, pe4->charger_current2);
|
|
|
|
pe4_hal_set_eoc_current(alg, CHG1,
|
|
pe4->dual_polling_ieoc);
|
|
pe4_hal_enable_termination(alg, CHG1, false);
|
|
pe4_hal_safety_check(alg, pe4->dual_polling_ieoc);
|
|
} else if (pe4->state == PE4_TUNING) {
|
|
if (!chg2_chip_enabled)
|
|
pe4_hal_charger_enable_chip(alg, CHG2, true);
|
|
pe4_hal_enable_charger(alg, CHG2, true);
|
|
pe4_hal_set_eoc_current(alg, CHG1, pe4->dual_polling_ieoc);
|
|
pe4_hal_enable_termination(alg, CHG1, false);
|
|
pe4_hal_safety_check(alg, pe4->dual_polling_ieoc);
|
|
} else if (pe4->state == PE4_POSTCC) {
|
|
pe4_hal_set_eoc_current(alg, CHG1, 150000);
|
|
pe4_hal_reset_eoc_state(alg);
|
|
pe4_hal_enable_termination(alg, CHG1, true);
|
|
} else {
|
|
pe4_err("%s state error!", __func__);
|
|
return -1;
|
|
}
|
|
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->charger_current1);
|
|
pe4_hal_set_input_current(alg,
|
|
CHG1, pe4->input_current1);
|
|
pe4_hal_set_cv(alg,
|
|
CHG1, pe4->cv);
|
|
|
|
pe4_dbg("%s m:%d s:%d cv:%d chg1:%d,%d chg2:%d,%d chg2en:%d min:%d,%d,%d\n",
|
|
__func__,
|
|
alg->config,
|
|
pe4->state,
|
|
pe4->cv,
|
|
pe4->input_current1,
|
|
pe4->charger_current1,
|
|
pe4->input_current2,
|
|
pe4->charger_current2,
|
|
chg2_chip_enabled,
|
|
ichg1_min,
|
|
ichg2_min,
|
|
aicr1_min);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void _pe4_set_current(struct chg_alg_device *alg)
|
|
{
|
|
int ret_value;
|
|
|
|
if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
if (pe4_dcs_set_charger(alg) != 0) {
|
|
ret_value = ALG_DONE;
|
|
//goto out;
|
|
}
|
|
} else {
|
|
if (pe4_sc_set_charger(alg) != 0) {
|
|
ret_value = ALG_DONE;
|
|
//goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int _pe4_start_algo(struct chg_alg_device *alg)
|
|
{
|
|
int ret = 0, ret_value = 0;
|
|
struct mtk_pe40 *pe4;
|
|
bool again;
|
|
int uisoc, tmp;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
mutex_lock(&pe4->access_lock);
|
|
__pm_stay_awake(pe4->suspend_lock);
|
|
|
|
do {
|
|
pe4_info("%s state:%d %s %d\n", __func__,
|
|
pe4->state,
|
|
pe4_state_to_str(pe4->state),
|
|
again);
|
|
|
|
again = false;
|
|
switch (pe4->state) {
|
|
case PE4_HW_UNINIT:
|
|
case PE4_HW_FAIL:
|
|
ret_value = ALG_INIT_FAIL;
|
|
break;
|
|
case PE4_HW_READY:
|
|
uisoc = pe4_hal_get_uisoc(alg);
|
|
ret = pe4_hal_is_pd_adapter_ready(alg);
|
|
ret_value = ret;
|
|
if (ret == ALG_READY) {
|
|
uisoc = pe4_hal_get_uisoc(alg);
|
|
tmp = pe4_hal_get_battery_temperature(alg);
|
|
if (pe4->input_current_limit1 != -1 ||
|
|
pe4->charging_current_limit1 != -1 ||
|
|
pe4->input_current_limit2 != -1 ||
|
|
pe4->charging_current_limit2 != -1 ||
|
|
uisoc > pe4->pe40_stop_battery_soc ||
|
|
uisoc == -1 ||
|
|
tmp > pe4->high_temp_to_enter_pe40 ||
|
|
tmp < pe4->low_temp_to_enter_pe40) {
|
|
ret_value = ALG_NOT_READY;
|
|
pe4_info("%d %d %d %d %d\n",
|
|
pe4->input_current_limit1,
|
|
pe4->charging_current_limit1,
|
|
pe4->pe40_stop_battery_soc,
|
|
pe4->high_temp_to_enter_pe40,
|
|
pe4->low_temp_to_enter_pe40);
|
|
} else {
|
|
again = true;
|
|
pe4->state = PE4_INIT;
|
|
}
|
|
} else if (ret == ALG_TA_NOT_SUPPORT)
|
|
pe4->state = PE4_TA_NOT_SUPPORT;
|
|
break;
|
|
case PE4_TA_NOT_SUPPORT:
|
|
ret_value = ALG_TA_NOT_SUPPORT;
|
|
break;
|
|
case PE4_INIT:
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->charger_current1);
|
|
mtk_pe40_init_state(alg);
|
|
again = true;
|
|
break;
|
|
case PE4_RUN:
|
|
case PE4_TUNING:
|
|
case PE4_POSTCC:
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG1, pe4->charger_current1);
|
|
_pe4_set_current(alg);
|
|
mtk_pe40_cc_state(alg);
|
|
break;
|
|
default:
|
|
pe4_err("PE4 unknown state:%d\n", pe4->state);
|
|
ret_value = ALG_INIT_FAIL;
|
|
break;
|
|
}
|
|
} while (again == true);
|
|
__pm_relax(pe4->suspend_lock);
|
|
mutex_unlock(&pe4->access_lock);
|
|
|
|
return ret_value;
|
|
}
|
|
|
|
|
|
static bool _pe4_is_algo_running(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4_dbg("%s\n", __func__);
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
if (pe4->state == PE4_RUN || pe4->state == PE4_INIT ||
|
|
pe4->state == PE4_TUNING || pe4->state == PE4_POSTCC)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int _pe4_stop_algo(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
|
|
pe4_dbg("%s %d\n", __func__, pe4->state);
|
|
if (pe4->state == PE4_RUN || pe4->state == PE4_INIT ||
|
|
pe4->state == PE4_TUNING || pe4->state == PE4_POSTCC)
|
|
mtk_pe40_end(alg, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pe4_plugout_reset(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
switch (pe4->state) {
|
|
case PE4_HW_UNINIT:
|
|
case PE4_HW_FAIL:
|
|
case PE4_HW_READY:
|
|
break;
|
|
case PE4_TA_NOT_SUPPORT:
|
|
pe4->state = PE4_HW_READY;
|
|
break;
|
|
case PE4_INIT:
|
|
case PE4_RUN:
|
|
case PE4_TUNING:
|
|
case PE4_POSTCC:
|
|
mtk_pe40_end(alg, 3);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pe4_full_evt(struct chg_alg_device *alg)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int ret = 0;
|
|
bool chg_en, chg2_enabled = false;
|
|
int ichg2, ichg2_min;
|
|
int ret_value;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
switch (pe4->state) {
|
|
case PE4_HW_UNINIT:
|
|
case PE4_HW_FAIL:
|
|
case PE4_HW_READY:
|
|
case PE4_TA_NOT_SUPPORT:
|
|
case PE4_INIT:
|
|
break;
|
|
case PE4_RUN:
|
|
case PE4_TUNING:
|
|
case PE4_POSTCC:
|
|
if (alg->config == DUAL_CHARGERS_IN_SERIES) {
|
|
pe4_hal_is_charger_enable(
|
|
alg, CHG2, &chg_en);
|
|
chg2_enabled = pe4_hal_is_chip_enable(alg, CHG2);
|
|
|
|
if (!chg_en || !chg2_enabled) {
|
|
/* notify eoc , fix me */
|
|
pe4->state = PE4_HW_READY;
|
|
pe4_err("%s: charging done:%d %d\n",
|
|
__func__, chg_en, chg2_enabled);
|
|
if (alg->is_polling_mode == false)
|
|
ret_value = 1;
|
|
} else {
|
|
pe4_hal_get_charging_current(alg, CHG2, &ichg2);
|
|
ret = pe4_hal_get_min_charging_current(
|
|
alg, CHG2, &ichg2_min);
|
|
if (ret == -ENOTSUPP)
|
|
ichg2_min = 100000;
|
|
|
|
pe4_err("ichg2:%d, ichg2_min:%d state:%d\n",
|
|
ichg2, ichg2_min, pe4->state);
|
|
if (ichg2 - 500000 <= ichg2_min) {
|
|
pe4->state = PE4_POSTCC;
|
|
pe4_hal_enable_charger(alg,
|
|
CHG2, false);
|
|
pe4_hal_set_eoc_current(alg,
|
|
CHG1, 150000);
|
|
pe4_hal_reset_eoc_state(alg);
|
|
pe4_hal_enable_termination(alg,
|
|
CHG1, true);
|
|
} else {
|
|
pe4->state = PE4_TUNING;
|
|
mutex_lock(&pe4->data_lock);
|
|
if (pe4->charger_current2 >= 500000)
|
|
pe4->charger_current2 =
|
|
ichg2 - 500000;
|
|
pe4_hal_set_charging_current(alg,
|
|
CHG2, pe4->charger_current2);
|
|
mutex_unlock(&pe4->data_lock);
|
|
}
|
|
ret_value = 1;
|
|
}
|
|
|
|
} else {
|
|
if (pe4->state == PE4_RUN) {
|
|
pe4_err("%s evt full\n", __func__);
|
|
pe4->state = PE4_HW_READY;
|
|
}
|
|
}
|
|
|
|
break;
|
|
default:
|
|
ret_value = ALG_INIT_FAIL;
|
|
break;
|
|
}
|
|
return ret_value;
|
|
}
|
|
|
|
static int _pe4_notifier_call(struct chg_alg_device *alg,
|
|
struct chg_alg_notify *notify)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
int ret_value;
|
|
|
|
pe4 = dev_get_drvdata(&alg->dev);
|
|
pe4_err("%s evt:%d, state:%s\n", __func__, notify->evt,
|
|
pe4_state_to_str(pe4->state));
|
|
|
|
switch (notify->evt) {
|
|
case EVT_PLUG_OUT:
|
|
ret_value = pe4_plugout_reset(alg);
|
|
break;
|
|
case EVT_FULL:
|
|
ret_value = pe4_full_evt(alg);
|
|
break;
|
|
default:
|
|
ret_value = -EINVAL;
|
|
}
|
|
|
|
return ret_value;
|
|
}
|
|
|
|
static void mtk_pe4_parse_dt(struct mtk_pe40 *pe4,
|
|
struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
u32 val;
|
|
|
|
if (of_property_read_u32(np, "pe40_max_vbus", &val) >= 0)
|
|
pe4->pe40_max_vbus = val;
|
|
else {
|
|
pe4_err("use default pe40_max_vbus:%d\n", PE40_MAX_VBUS);
|
|
pe4->pe40_max_vbus = PE40_MAX_VBUS;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pe40_max_ibus", &val) >= 0)
|
|
pe4->pe40_max_ibus = val;
|
|
else {
|
|
pe4_err("use default pe40_max_ibus:%d\n", PE40_MAX_IBUS);
|
|
pe4->pe40_max_ibus = PE40_MAX_IBUS;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "min_charger_voltage", &val) >= 0)
|
|
pe4->min_charger_voltage = val;
|
|
else {
|
|
pe4_err("use default V_CHARGER_MIN:%d\n", V_CHARGER_MIN);
|
|
pe4->min_charger_voltage = V_CHARGER_MIN;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pe40_stop_battery_soc", &val) >= 0)
|
|
pe4->pe40_stop_battery_soc = val;
|
|
else {
|
|
pe4_err("use default pe40_stop_battery_soc:%d\n", 80);
|
|
pe4->pe40_stop_battery_soc = 80;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "high_temp_to_leave_pe40", &val) >= 0) {
|
|
pe4->high_temp_to_leave_pe40 = val;
|
|
} else {
|
|
pe4_err("use default high_temp_to_leave_pe40:%d\n",
|
|
HIGH_TEMP_TO_LEAVE_PE40);
|
|
pe4->high_temp_to_leave_pe40 = HIGH_TEMP_TO_LEAVE_PE40;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "high_temp_to_enter_pe40", &val) >= 0) {
|
|
pe4->high_temp_to_enter_pe40 = val;
|
|
} else {
|
|
pe4_err("use default high_temp_to_enter_pe40:%d\n",
|
|
HIGH_TEMP_TO_ENTER_PE40);
|
|
pe4->high_temp_to_enter_pe40 = HIGH_TEMP_TO_ENTER_PE40;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "low_temp_to_leave_pe40", &val) >= 0) {
|
|
pe4->low_temp_to_leave_pe40 = val;
|
|
} else {
|
|
pe4_err("use default low_temp_to_leave_pe40:%d\n",
|
|
LOW_TEMP_TO_LEAVE_PE40);
|
|
pe4->low_temp_to_leave_pe40 = LOW_TEMP_TO_LEAVE_PE40;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "low_temp_to_enter_pe40", &val) >= 0) {
|
|
pe4->low_temp_to_enter_pe40 = val;
|
|
} else {
|
|
pe4_err("use default low_temp_to_enter_pe40:%d\n",
|
|
LOW_TEMP_TO_ENTER_PE40);
|
|
pe4->low_temp_to_enter_pe40 = LOW_TEMP_TO_ENTER_PE40;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "ibus_err", &val) >= 0) {
|
|
pe4->ibus_err = val;
|
|
} else {
|
|
pe4_err("use default ibus_err:%d\n",
|
|
IBUS_ERR);
|
|
pe4->ibus_err = IBUS_ERR;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pe40_r_cable_1a_lower", &val) >= 0)
|
|
pe4->pe40_r_cable_1a_lower = val;
|
|
else {
|
|
pe4_err("use default pe40_r_cable_1a_lower:%d\n", 530);
|
|
pe4->pe40_r_cable_1a_lower = 530;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pe40_r_cable_2a_lower", &val) >= 0)
|
|
pe4->pe40_r_cable_2a_lower = val;
|
|
else {
|
|
pe4_err("use default pe40_r_cable_2a_lower:%d\n", 390);
|
|
pe4->pe40_r_cable_2a_lower = 390;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pe40_r_cable_3a_lower", &val) >= 0)
|
|
pe4->pe40_r_cable_3a_lower = val;
|
|
else {
|
|
pe4_err("use default pe40_r_cable_3a_lower:%d\n", 252);
|
|
pe4->pe40_r_cable_3a_lower = 252;
|
|
}
|
|
|
|
/* single charger */
|
|
if (of_property_read_u32(np, "sc_input_current", &val)
|
|
>= 0) {
|
|
pe4->sc_input_current = val;
|
|
} else {
|
|
pe4_err("use default sc_input_current:%d\n", 3000000);
|
|
pe4->sc_input_current = 3000000;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "sc_charger_current", &val)
|
|
>= 0) {
|
|
pe4->sc_charger_current = val;
|
|
} else {
|
|
pe4_err("use default sc_charger_current:%d\n", 3000000);
|
|
pe4->sc_charger_current = 3000000;
|
|
}
|
|
|
|
/* dual charger in series*/
|
|
if (of_property_read_u32(np, "dcs_input_current", &val)
|
|
>= 0) {
|
|
pe4->dcs_input_current = val;
|
|
} else {
|
|
pe4_err("use default dcs_input_current:%d\n", 3000000);
|
|
pe4->dcs_input_current = 3000000;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "dcs_chg1_charger_current", &val)
|
|
>= 0) {
|
|
pe4->dcs_chg1_charger_current = val;
|
|
} else {
|
|
pe4_err("use default dcs_chg1_charger_current:%d\n", 1500000);
|
|
pe4->dcs_chg1_charger_current = 1500000;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "dcs_chg2_charger_current", &val)
|
|
>= 0) {
|
|
pe4->dcs_chg2_charger_current = val;
|
|
} else {
|
|
pe4_err("use default dcs_chg2_charger_current:%d\n", 1500000);
|
|
pe4->dcs_chg2_charger_current = 1500000;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "dual_polling_ieoc", &val) >= 0)
|
|
pe4->dual_polling_ieoc = val;
|
|
else {
|
|
pr_notice("use default dual_polling_ieoc :%d\n", 750000);
|
|
pe4->dual_polling_ieoc = 750000;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "slave_mivr_diff", &val) >= 0)
|
|
pe4->slave_mivr_diff = val;
|
|
else {
|
|
pr_notice("use default slave_mivr_diff:%d\n",
|
|
PE4_SLAVE_MIVR_DIFF);
|
|
pe4->slave_mivr_diff = PE4_SLAVE_MIVR_DIFF;
|
|
}
|
|
|
|
}
|
|
|
|
int _pe4_get_status(struct chg_alg_device *alg,
|
|
enum chg_alg_props s, int *value)
|
|
{
|
|
|
|
pr_notice("%s\n", __func__);
|
|
if (s == ALG_MAX_VBUS)
|
|
*value = 10000;
|
|
else
|
|
pr_notice("%s does not support prop:%d\n", __func__, s);
|
|
return 0;
|
|
}
|
|
|
|
int _pe4_set_setting(struct chg_alg_device *alg_dev,
|
|
struct chg_limit_setting *setting)
|
|
{
|
|
struct mtk_pe40 *pe4;
|
|
|
|
pe4 = dev_get_drvdata(&alg_dev->dev);
|
|
|
|
pe4_dbg("%s cv:%d icl:%d,%d cc:%d,%d\n",
|
|
__func__,
|
|
setting->cv,
|
|
setting->input_current_limit1,
|
|
setting->input_current_limit2,
|
|
setting->charging_current_limit1,
|
|
setting->charging_current_limit2);
|
|
|
|
mutex_lock(&pe4->access_lock);
|
|
__pm_stay_awake(pe4->suspend_lock);
|
|
pe4->cv = setting->cv;
|
|
pe4->input_current_limit1 = setting->input_current_limit1;
|
|
pe4->input_current_limit2 = setting->input_current_limit2;
|
|
pe4->charging_current_limit1 = setting->charging_current_limit1;
|
|
pe4->charging_current_limit2 = setting->charging_current_limit2;
|
|
|
|
pe4_dbg("%s cv:%d icl1:%d:%d icl2:%d:%d icl:%d:%d cc:%d:%d\n",
|
|
__func__,
|
|
setting->cv,
|
|
pe4->input_current1,
|
|
pe4->input_current_limit2,
|
|
pe4->input_current2,
|
|
pe4->input_current_limit2,
|
|
pe4->pe4_input_current_limit,
|
|
pe4->pe4_input_current_limit_setting,
|
|
pe4->charger_current1,
|
|
pe4->charger_current2);
|
|
|
|
__pm_relax(pe4->suspend_lock);
|
|
mutex_unlock(&pe4->access_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int _pe4_set_prop(struct chg_alg_device *alg,
|
|
enum chg_alg_props s, int value)
|
|
{
|
|
pr_notice("%s %d %d\n", __func__, s, value);
|
|
return 0;
|
|
}
|
|
|
|
static struct chg_alg_ops pe4_alg_ops = {
|
|
.init_algo = _pe4_init_algo,
|
|
.is_algo_ready = _pe4_is_algo_ready,
|
|
.start_algo = _pe4_start_algo,
|
|
.is_algo_running = _pe4_is_algo_running,
|
|
.stop_algo = _pe4_stop_algo,
|
|
.notifier_call = _pe4_notifier_call,
|
|
.get_prop = _pe4_get_status,
|
|
.set_prop = _pe4_set_prop,
|
|
.set_current_limit = _pe4_set_setting,
|
|
};
|
|
|
|
static int mtk_pe4_probe(struct platform_device *pdev)
|
|
{
|
|
struct mtk_pe40 *pe4 = NULL;
|
|
|
|
pr_notice("%s: starts\n", __func__);
|
|
|
|
pe4 = devm_kzalloc(&pdev->dev, sizeof(*pe4), GFP_KERNEL);
|
|
if (!pe4)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, pe4);
|
|
pe4->pdev = pdev;
|
|
mutex_init(&pe4->access_lock);
|
|
mutex_init(&pe4->data_lock);
|
|
pe4->suspend_lock =
|
|
wakeup_source_register(NULL, "PE4.0 suspend wakelock");
|
|
|
|
mtk_pe4_parse_dt(pe4, &pdev->dev);
|
|
pe4->bat_psy = devm_power_supply_get_by_phandle(&pdev->dev, "gauge");
|
|
|
|
if (IS_ERR_OR_NULL(pe4->bat_psy))
|
|
pe4_err("%s: devm power fail to get pe4->bat_psy\n", __func__);
|
|
|
|
pe4->alg = chg_alg_device_register("pe4", &pdev->dev,
|
|
pe4, &pe4_alg_ops, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_pe4_remove(struct platform_device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_pe4_shutdown(struct platform_device *dev)
|
|
{
|
|
|
|
}
|
|
|
|
static const struct of_device_id mtk_pe4_of_match[] = {
|
|
{.compatible = "mediatek,charger,pe4",},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mtk_pe4_of_match);
|
|
|
|
struct platform_device pe4_device = {
|
|
.name = "pe4",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_driver pe4_driver = {
|
|
.probe = mtk_pe4_probe,
|
|
.remove = mtk_pe4_remove,
|
|
.shutdown = mtk_pe4_shutdown,
|
|
.driver = {
|
|
.name = "pe4",
|
|
.of_match_table = mtk_pe4_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init mtk_pe4_init(void)
|
|
{
|
|
return platform_driver_register(&pe4_driver);
|
|
}
|
|
late_initcall(mtk_pe4_init);
|
|
|
|
static void __exit mtk_pe4_exit(void)
|
|
{
|
|
platform_driver_unregister(&pe4_driver);
|
|
}
|
|
module_exit(mtk_pe4_exit);
|
|
|
|
|
|
MODULE_AUTHOR("wy.chuang <wy.chuang@mediatek.com>");
|
|
MODULE_DESCRIPTION("MTK Pump Express 4 algorithm Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|