55 lines
1.6 KiB
Plaintext
55 lines
1.6 KiB
Plaintext
TI Keystone Soc USB Controller
|
|
|
|
DWC3 GLUE
|
|
|
|
Required properties:
|
|
- compatible: should be "ti,keystone-dwc3".
|
|
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
|
|
with 'reg' property.
|
|
- reg : Address and length of the register set for the USB subsystem on
|
|
the SOC.
|
|
- interrupts : The irq number of this device that is used to interrupt the
|
|
MPU.
|
|
- ranges: allows valid 1:1 translation between child's address space and
|
|
parent's address space.
|
|
|
|
SoC-specific Required Properties:
|
|
The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
|
|
SoCs only:
|
|
|
|
- clocks: Clock ID for USB functional clock.
|
|
- clock-names: Must be "usb".
|
|
|
|
|
|
The following are mandatory properties for Keystone 2 66AK2G SoCs only:
|
|
|
|
- power-domains: Should contain a phandle to a PM domain provider node
|
|
and an args specifier containing the USB device id
|
|
value. This property is as per the binding,
|
|
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
|
|
|
|
Sub-nodes:
|
|
The dwc3 core should be added as subnode to Keystone DWC3 glue.
|
|
- dwc3 :
|
|
The binding details of dwc3 can be found in:
|
|
Documentation/devicetree/bindings/usb/dwc3.txt
|
|
|
|
Example:
|
|
usb: usb@2680000 {
|
|
compatible = "ti,keystone-dwc3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x2680000 0x10000>;
|
|
clocks = <&clkusb>;
|
|
clock-names = "usb";
|
|
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
|
|
ranges;
|
|
|
|
dwc3@2690000 {
|
|
compatible = "synopsys,dwc3";
|
|
reg = <0x2690000 0x70000>;
|
|
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
|
|
usb-phy = <&usb_phy>, <&usb_phy>;
|
|
};
|
|
};
|