94 lines
3.2 KiB
ReStructuredText
94 lines
3.2 KiB
ReStructuredText
.. -*- coding: utf-8; mode: rst -*-
|
|
|
|
.. _CEC_ADAP_PHYS_ADDR:
|
|
.. _CEC_ADAP_G_PHYS_ADDR:
|
|
.. _CEC_ADAP_S_PHYS_ADDR:
|
|
|
|
****************************************************
|
|
ioctls CEC_ADAP_G_PHYS_ADDR and CEC_ADAP_S_PHYS_ADDR
|
|
****************************************************
|
|
|
|
Name
|
|
====
|
|
|
|
CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR - Get or set the physical address
|
|
|
|
|
|
Synopsis
|
|
========
|
|
|
|
.. c:function:: int ioctl( int fd, CEC_ADAP_G_PHYS_ADDR, __u16 *argp )
|
|
:name: CEC_ADAP_G_PHYS_ADDR
|
|
|
|
.. c:function:: int ioctl( int fd, CEC_ADAP_S_PHYS_ADDR, __u16 *argp )
|
|
:name: CEC_ADAP_S_PHYS_ADDR
|
|
|
|
Arguments
|
|
=========
|
|
|
|
``fd``
|
|
File descriptor returned by :c:func:`open() <cec-open>`.
|
|
|
|
``argp``
|
|
Pointer to the CEC address.
|
|
|
|
Description
|
|
===========
|
|
|
|
To query the current physical address applications call
|
|
:ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
|
|
driver stores the physical address.
|
|
|
|
To set a new physical address applications store the physical address in
|
|
a __u16 and call :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` with a pointer to
|
|
this integer. The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` is only available if
|
|
``CEC_CAP_PHYS_ADDR`` is set (the ``ENOTTY`` error code will be returned
|
|
otherwise). The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can only be called
|
|
by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
|
|
the ``EBUSY`` error code will be returned.
|
|
|
|
To clear an existing physical address use ``CEC_PHYS_ADDR_INVALID``.
|
|
The adapter will go to the unconfigured state.
|
|
|
|
If logical address types have been defined (see :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`),
|
|
then this ioctl will block until all
|
|
requested logical addresses have been claimed. If the file descriptor is in non-blocking mode
|
|
then it will not wait for the logical addresses to be claimed, instead it just returns 0.
|
|
|
|
A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the physical address
|
|
changes.
|
|
|
|
The physical address is a 16-bit number where each group of 4 bits
|
|
represent a digit of the physical address a.b.c.d where the most
|
|
significant 4 bits represent 'a'. The CEC root device (usually the TV)
|
|
has address 0.0.0.0. Every device that is hooked up to an input of the
|
|
TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
|
|
turn have addresses a.b.0.0, etc. So a topology of up to 5 devices deep
|
|
is supported. The physical address a device shall use is stored in the
|
|
EDID of the sink.
|
|
|
|
For example, the EDID for each HDMI input of the TV will have a
|
|
different physical address of the form a.0.0.0 that the sources will
|
|
read out and use as their physical address.
|
|
|
|
|
|
Return Value
|
|
============
|
|
|
|
On success 0 is returned, on error -1 and the ``errno`` variable is set
|
|
appropriately. The generic error codes are described at the
|
|
:ref:`Generic Error Codes <gen-errors>` chapter.
|
|
|
|
The :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>` can return the following
|
|
error codes:
|
|
|
|
ENOTTY
|
|
The ``CEC_CAP_PHYS_ADDR`` capability wasn't set, so this ioctl is not supported.
|
|
|
|
EBUSY
|
|
Another filehandle is in exclusive follower or initiator mode, or the filehandle
|
|
is in mode ``CEC_MODE_NO_INITIATOR``.
|
|
|
|
EINVAL
|
|
The physical address is malformed.
|