293 lines
8.7 KiB
C
293 lines
8.7 KiB
C
/*******************************************************************************
|
|
This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
|
|
DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
|
|
developing this code.
|
|
|
|
This contains the functions to handle the dma.
|
|
|
|
Copyright (C) 2007-2009 STMicroelectronics Ltd
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*******************************************************************************/
|
|
|
|
#include <asm/io.h>
|
|
#include "dwmac1000.h"
|
|
#include "dwmac_dma.h"
|
|
|
|
static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
|
|
{
|
|
u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
|
|
int i;
|
|
|
|
pr_info("dwmac1000: Master AXI performs %s burst length\n",
|
|
!(value & DMA_AXI_UNDEF) ? "fixed" : "any");
|
|
|
|
if (axi->axi_lpi_en)
|
|
value |= DMA_AXI_EN_LPI;
|
|
if (axi->axi_xit_frm)
|
|
value |= DMA_AXI_LPI_XIT_FRM;
|
|
|
|
value &= ~DMA_AXI_WR_OSR_LMT;
|
|
value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
|
|
DMA_AXI_WR_OSR_LMT_SHIFT;
|
|
|
|
value &= ~DMA_AXI_RD_OSR_LMT;
|
|
value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
|
|
DMA_AXI_RD_OSR_LMT_SHIFT;
|
|
|
|
/* Depending on the UNDEF bit the Master AXI will perform any burst
|
|
* length according to the BLEN programmed (by default all BLEN are
|
|
* set).
|
|
*/
|
|
for (i = 0; i < AXI_BLEN; i++) {
|
|
switch (axi->axi_blen[i]) {
|
|
case 256:
|
|
value |= DMA_AXI_BLEN256;
|
|
break;
|
|
case 128:
|
|
value |= DMA_AXI_BLEN128;
|
|
break;
|
|
case 64:
|
|
value |= DMA_AXI_BLEN64;
|
|
break;
|
|
case 32:
|
|
value |= DMA_AXI_BLEN32;
|
|
break;
|
|
case 16:
|
|
value |= DMA_AXI_BLEN16;
|
|
break;
|
|
case 8:
|
|
value |= DMA_AXI_BLEN8;
|
|
break;
|
|
case 4:
|
|
value |= DMA_AXI_BLEN4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
writel(value, ioaddr + DMA_AXI_BUS_MODE);
|
|
}
|
|
|
|
static void dwmac1000_dma_init(void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg, int atds)
|
|
{
|
|
u32 value = readl(ioaddr + DMA_BUS_MODE);
|
|
int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
|
|
int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
|
|
|
|
/*
|
|
* Set the DMA PBL (Programmable Burst Length) mode.
|
|
*
|
|
* Note: before stmmac core 3.50 this mode bit was 4xPBL, and
|
|
* post 3.5 mode bit acts as 8*PBL.
|
|
*/
|
|
if (dma_cfg->pblx8)
|
|
value |= DMA_BUS_MODE_MAXPBL;
|
|
value |= DMA_BUS_MODE_USP;
|
|
value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
|
|
value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
|
|
value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
|
|
|
|
/* Set the Fixed burst mode */
|
|
if (dma_cfg->fixed_burst)
|
|
value |= DMA_BUS_MODE_FB;
|
|
|
|
/* Mixed Burst has no effect when fb is set */
|
|
if (dma_cfg->mixed_burst)
|
|
value |= DMA_BUS_MODE_MB;
|
|
|
|
if (atds)
|
|
value |= DMA_BUS_MODE_ATDS;
|
|
|
|
if (dma_cfg->aal)
|
|
value |= DMA_BUS_MODE_AAL;
|
|
|
|
writel(value, ioaddr + DMA_BUS_MODE);
|
|
|
|
/* Mask interrupts by writing to CSR7 */
|
|
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
|
|
}
|
|
|
|
static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg,
|
|
u32 dma_rx_phy, u32 chan)
|
|
{
|
|
/* RX descriptor base address list must be written into DMA CSR3 */
|
|
writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
|
|
}
|
|
|
|
static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg,
|
|
u32 dma_tx_phy, u32 chan)
|
|
{
|
|
/* TX descriptor base address list must be written into DMA CSR4 */
|
|
writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
|
|
}
|
|
|
|
static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
|
|
{
|
|
csr6 &= ~DMA_CONTROL_RFA_MASK;
|
|
csr6 &= ~DMA_CONTROL_RFD_MASK;
|
|
|
|
/* Leave flow control disabled if receive fifo size is less than
|
|
* 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
|
|
* and send XON when 2K less than full.
|
|
*/
|
|
if (rxfifosz < 4096) {
|
|
csr6 &= ~DMA_CONTROL_EFC;
|
|
pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
|
|
rxfifosz);
|
|
} else {
|
|
csr6 |= DMA_CONTROL_EFC;
|
|
csr6 |= RFA_FULL_MINUS_1K;
|
|
csr6 |= RFD_FULL_MINUS_2K;
|
|
}
|
|
return csr6;
|
|
}
|
|
|
|
static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
|
|
u32 channel, int fifosz, u8 qmode)
|
|
{
|
|
u32 csr6 = readl(ioaddr + DMA_CONTROL);
|
|
|
|
if (mode == SF_DMA_MODE) {
|
|
pr_debug("GMAC: enable RX store and forward mode\n");
|
|
csr6 |= DMA_CONTROL_RSF;
|
|
} else {
|
|
pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
|
|
csr6 &= ~DMA_CONTROL_RSF;
|
|
csr6 &= DMA_CONTROL_TC_RX_MASK;
|
|
if (mode <= 32)
|
|
csr6 |= DMA_CONTROL_RTC_32;
|
|
else if (mode <= 64)
|
|
csr6 |= DMA_CONTROL_RTC_64;
|
|
else if (mode <= 96)
|
|
csr6 |= DMA_CONTROL_RTC_96;
|
|
else
|
|
csr6 |= DMA_CONTROL_RTC_128;
|
|
}
|
|
|
|
/* Configure flow control based on rx fifo size */
|
|
csr6 = dwmac1000_configure_fc(csr6, fifosz);
|
|
|
|
writel(csr6, ioaddr + DMA_CONTROL);
|
|
}
|
|
|
|
static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
|
|
u32 channel, int fifosz, u8 qmode)
|
|
{
|
|
u32 csr6 = readl(ioaddr + DMA_CONTROL);
|
|
|
|
if (mode == SF_DMA_MODE) {
|
|
pr_debug("GMAC: enable TX store and forward mode\n");
|
|
/* Transmit COE type 2 cannot be done in cut-through mode. */
|
|
csr6 |= DMA_CONTROL_TSF;
|
|
/* Operating on second frame increase the performance
|
|
* especially when transmit store-and-forward is used.
|
|
*/
|
|
csr6 |= DMA_CONTROL_OSF;
|
|
} else {
|
|
pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
|
|
csr6 &= ~DMA_CONTROL_TSF;
|
|
csr6 &= DMA_CONTROL_TC_TX_MASK;
|
|
/* Set the transmit threshold */
|
|
if (mode <= 32)
|
|
csr6 |= DMA_CONTROL_TTC_32;
|
|
else if (mode <= 64)
|
|
csr6 |= DMA_CONTROL_TTC_64;
|
|
else if (mode <= 128)
|
|
csr6 |= DMA_CONTROL_TTC_128;
|
|
else if (mode <= 192)
|
|
csr6 |= DMA_CONTROL_TTC_192;
|
|
else
|
|
csr6 |= DMA_CONTROL_TTC_256;
|
|
}
|
|
|
|
writel(csr6, ioaddr + DMA_CONTROL);
|
|
}
|
|
|
|
static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
|
|
if ((i < 12) || (i > 17))
|
|
reg_space[DMA_BUS_MODE / 4 + i] =
|
|
readl(ioaddr + DMA_BUS_MODE + i * 4);
|
|
}
|
|
|
|
static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
|
|
struct dma_features *dma_cap)
|
|
{
|
|
u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
|
|
|
|
dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
|
|
dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
|
|
dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
|
|
dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
|
|
dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
|
|
dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
|
|
dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
|
|
dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
|
|
dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
|
|
/* MMC */
|
|
dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
|
|
/* IEEE 1588-2002 */
|
|
dma_cap->time_stamp =
|
|
(hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
|
|
/* IEEE 1588-2008 */
|
|
dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
|
|
/* 802.3az - Energy-Efficient Ethernet (EEE) */
|
|
dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
|
|
dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
|
|
/* TX and RX csum */
|
|
dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
|
|
dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
|
|
dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
|
|
dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
|
|
/* TX and RX number of channels */
|
|
dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
|
|
dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
|
|
/* Alternate (enhanced) DESC mode */
|
|
dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
|
|
}
|
|
|
|
static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
|
|
u32 number_chan)
|
|
{
|
|
writel(riwt, ioaddr + DMA_RX_WATCHDOG);
|
|
}
|
|
|
|
const struct stmmac_dma_ops dwmac1000_dma_ops = {
|
|
.reset = dwmac_dma_reset,
|
|
.init = dwmac1000_dma_init,
|
|
.init_rx_chan = dwmac1000_dma_init_rx,
|
|
.init_tx_chan = dwmac1000_dma_init_tx,
|
|
.axi = dwmac1000_dma_axi,
|
|
.dump_regs = dwmac1000_dump_dma_regs,
|
|
.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
|
|
.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
|
|
.enable_dma_transmission = dwmac_enable_dma_transmission,
|
|
.enable_dma_irq = dwmac_enable_dma_irq,
|
|
.disable_dma_irq = dwmac_disable_dma_irq,
|
|
.start_tx = dwmac_dma_start_tx,
|
|
.stop_tx = dwmac_dma_stop_tx,
|
|
.start_rx = dwmac_dma_start_rx,
|
|
.stop_rx = dwmac_dma_stop_rx,
|
|
.dma_interrupt = dwmac_dma_interrupt,
|
|
.get_hw_feature = dwmac1000_get_hw_feature,
|
|
.rx_watchdog = dwmac1000_rx_watchdog,
|
|
};
|