- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
410 lines
10 KiB
C
410 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
|
|
// http://www.samsung.com/
|
|
//
|
|
// Exynos - CPU PMU(Power Management Unit) support
|
|
|
|
#include <linux/arm-smccc.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/soc/samsung/exynos-regs-pmu.h>
|
|
#include <linux/soc/samsung/exynos-pmu.h>
|
|
|
|
#include "exynos-pmu.h"
|
|
|
|
#define PMUALIVE_MASK GENMASK(13, 0)
|
|
#define TENSOR_SET_BITS (BIT(15) | BIT(14))
|
|
#define TENSOR_CLR_BITS BIT(15)
|
|
#define TENSOR_SMC_PMU_SEC_REG 0x82000504
|
|
#define TENSOR_PMUREG_READ 0
|
|
#define TENSOR_PMUREG_WRITE 1
|
|
#define TENSOR_PMUREG_RMW 2
|
|
|
|
struct exynos_pmu_context {
|
|
struct device *dev;
|
|
const struct exynos_pmu_data *pmu_data;
|
|
struct regmap *pmureg;
|
|
};
|
|
|
|
void __iomem *pmu_base_addr;
|
|
static struct exynos_pmu_context *pmu_context;
|
|
/* forward declaration */
|
|
static struct platform_driver exynos_pmu_driver;
|
|
|
|
/*
|
|
* Tensor SoCs are configured so that PMU_ALIVE registers can only be written
|
|
* from EL3, but are still read accessible. As Linux needs to write some of
|
|
* these registers, the following functions are provided and exposed via
|
|
* regmap.
|
|
*
|
|
* Note: This SMC interface is known to be implemented on gs101 and derivative
|
|
* SoCs.
|
|
*/
|
|
|
|
/* Write to a protected PMU register. */
|
|
static int tensor_sec_reg_write(void *context, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct arm_smccc_res res;
|
|
unsigned long pmu_base = (unsigned long)context;
|
|
|
|
arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
|
|
TENSOR_PMUREG_WRITE, val, 0, 0, 0, 0, &res);
|
|
|
|
/* returns -EINVAL if access isn't allowed or 0 */
|
|
if (res.a0)
|
|
pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);
|
|
|
|
return (int)res.a0;
|
|
}
|
|
|
|
/* Read/Modify/Write a protected PMU register. */
|
|
static int tensor_sec_reg_rmw(void *context, unsigned int reg,
|
|
unsigned int mask, unsigned int val)
|
|
{
|
|
struct arm_smccc_res res;
|
|
unsigned long pmu_base = (unsigned long)context;
|
|
|
|
arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
|
|
TENSOR_PMUREG_RMW, mask, val, 0, 0, 0, &res);
|
|
|
|
/* returns -EINVAL if access isn't allowed or 0 */
|
|
if (res.a0)
|
|
pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);
|
|
|
|
return (int)res.a0;
|
|
}
|
|
|
|
/*
|
|
* Read a protected PMU register. All PMU registers can be read by Linux.
|
|
* Note: The SMC read register is not used, as only registers that can be
|
|
* written are readable via SMC.
|
|
*/
|
|
static int tensor_sec_reg_read(void *context, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
*val = pmu_raw_readl(reg);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For SoCs that have set/clear bit hardware this function can be used when
|
|
* the PMU register will be accessed by multiple masters.
|
|
*
|
|
* For example, to set bits 13:8 in PMU reg offset 0x3e80
|
|
* tensor_set_bits_atomic(ctx, 0x3e80, 0x3f00, 0x3f00);
|
|
*
|
|
* Set bit 8, and clear bits 13:9 PMU reg offset 0x3e80
|
|
* tensor_set_bits_atomic(0x3e80, 0x100, 0x3f00);
|
|
*/
|
|
static int tensor_set_bits_atomic(void *ctx, unsigned int offset, u32 val,
|
|
u32 mask)
|
|
{
|
|
int ret;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
if (!(mask & BIT(i)))
|
|
continue;
|
|
|
|
offset &= ~TENSOR_SET_BITS;
|
|
|
|
if (val & BIT(i))
|
|
offset |= TENSOR_SET_BITS;
|
|
else
|
|
offset |= TENSOR_CLR_BITS;
|
|
|
|
ret = tensor_sec_reg_write(ctx, offset, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static bool tensor_is_atomic(unsigned int reg)
|
|
{
|
|
/*
|
|
* Use atomic operations for PMU_ALIVE registers (offset 0~0x3FFF)
|
|
* as the target registers can be accessed by multiple masters. SFRs
|
|
* that don't support atomic are added to the switch statement below.
|
|
*/
|
|
if (reg > PMUALIVE_MASK)
|
|
return false;
|
|
|
|
switch (reg) {
|
|
case GS101_SYSIP_DAT0:
|
|
case GS101_SYSTEM_CONFIGURATION:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static int tensor_sec_update_bits(void *ctx, unsigned int reg,
|
|
unsigned int mask, unsigned int val)
|
|
{
|
|
|
|
if (!tensor_is_atomic(reg))
|
|
return tensor_sec_reg_rmw(ctx, reg, mask, val);
|
|
|
|
return tensor_set_bits_atomic(ctx, reg, val, mask);
|
|
}
|
|
|
|
void pmu_raw_writel(u32 val, u32 offset)
|
|
{
|
|
writel_relaxed(val, pmu_base_addr + offset);
|
|
}
|
|
|
|
u32 pmu_raw_readl(u32 offset)
|
|
{
|
|
return readl_relaxed(pmu_base_addr + offset);
|
|
}
|
|
|
|
void exynos_sys_powerdown_conf(enum sys_powerdown mode)
|
|
{
|
|
unsigned int i;
|
|
const struct exynos_pmu_data *pmu_data;
|
|
|
|
if (!pmu_context || !pmu_context->pmu_data)
|
|
return;
|
|
|
|
pmu_data = pmu_context->pmu_data;
|
|
|
|
if (pmu_data->powerdown_conf)
|
|
pmu_data->powerdown_conf(mode);
|
|
|
|
if (pmu_data->pmu_config) {
|
|
for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
|
|
pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
|
|
pmu_data->pmu_config[i].offset);
|
|
}
|
|
|
|
if (pmu_data->powerdown_conf_extra)
|
|
pmu_data->powerdown_conf_extra(mode);
|
|
|
|
if (pmu_data->pmu_config_extra) {
|
|
for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
|
|
pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
|
|
pmu_data->pmu_config_extra[i].offset);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Split the data between ARM architectures because it is relatively big
|
|
* and useless on other arch.
|
|
*/
|
|
#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
|
|
#define exynos_pmu_data_arm_ptr(data) (&data)
|
|
#else
|
|
#define exynos_pmu_data_arm_ptr(data) NULL
|
|
#endif
|
|
|
|
static const struct regmap_config regmap_smccfg = {
|
|
.name = "pmu_regs",
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.fast_io = true,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
.reg_read = tensor_sec_reg_read,
|
|
.reg_write = tensor_sec_reg_write,
|
|
.reg_update_bits = tensor_sec_update_bits,
|
|
};
|
|
|
|
static const struct exynos_pmu_data gs101_pmu_data = {
|
|
.pmu_secure = true
|
|
};
|
|
|
|
/*
|
|
* PMU platform driver and devicetree bindings.
|
|
*/
|
|
static const struct of_device_id exynos_pmu_of_device_ids[] = {
|
|
{
|
|
.compatible = "google,gs101-pmu",
|
|
.data = &gs101_pmu_data,
|
|
}, {
|
|
.compatible = "samsung,exynos3250-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos4210-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos4212-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos4412-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos5250-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos5410-pmu",
|
|
}, {
|
|
.compatible = "samsung,exynos5420-pmu",
|
|
.data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
|
|
}, {
|
|
.compatible = "samsung,exynos5433-pmu",
|
|
}, {
|
|
.compatible = "samsung,exynos7-pmu",
|
|
}, {
|
|
.compatible = "samsung,exynos850-pmu",
|
|
},
|
|
{ /*sentinel*/ },
|
|
};
|
|
|
|
static const struct mfd_cell exynos_pmu_devs[] = {
|
|
{ .name = "exynos-clkout", },
|
|
};
|
|
|
|
/**
|
|
* exynos_get_pmu_regmap() - Obtain pmureg regmap
|
|
*
|
|
* Find the pmureg regmap previously configured in probe() and return regmap
|
|
* pointer.
|
|
*
|
|
* Return: A pointer to regmap if found or ERR_PTR error value.
|
|
*/
|
|
struct regmap *exynos_get_pmu_regmap(void)
|
|
{
|
|
struct device_node *np = of_find_matching_node(NULL,
|
|
exynos_pmu_of_device_ids);
|
|
if (np)
|
|
return exynos_get_pmu_regmap_by_phandle(np, NULL);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap);
|
|
|
|
/**
|
|
* exynos_get_pmu_regmap_by_phandle() - Obtain pmureg regmap via phandle
|
|
* @np: Device node holding PMU phandle property
|
|
* @propname: Name of property holding phandle value
|
|
*
|
|
* Find the pmureg regmap previously configured in probe() and return regmap
|
|
* pointer.
|
|
*
|
|
* Return: A pointer to regmap if found or ERR_PTR error value.
|
|
*/
|
|
struct regmap *exynos_get_pmu_regmap_by_phandle(struct device_node *np,
|
|
const char *propname)
|
|
{
|
|
struct device_node *pmu_np;
|
|
struct device *dev;
|
|
|
|
if (propname)
|
|
pmu_np = of_parse_phandle(np, propname, 0);
|
|
else
|
|
pmu_np = np;
|
|
|
|
if (!pmu_np)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
/*
|
|
* Determine if exynos-pmu device has probed and therefore regmap
|
|
* has been created and can be returned to the caller. Otherwise we
|
|
* return -EPROBE_DEFER.
|
|
*/
|
|
dev = driver_find_device_by_of_node(&exynos_pmu_driver.driver,
|
|
(void *)pmu_np);
|
|
|
|
if (propname)
|
|
of_node_put(pmu_np);
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
return syscon_node_to_regmap(pmu_np);
|
|
}
|
|
EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap_by_phandle);
|
|
|
|
static int exynos_pmu_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct regmap_config pmu_regmcfg;
|
|
struct regmap *regmap;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
pmu_base_addr = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pmu_base_addr))
|
|
return PTR_ERR(pmu_base_addr);
|
|
|
|
pmu_context = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct exynos_pmu_context),
|
|
GFP_KERNEL);
|
|
if (!pmu_context)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
pmu_context->pmu_data = of_device_get_match_data(dev);
|
|
|
|
/* For SoCs that secure PMU register writes use custom regmap */
|
|
if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_secure) {
|
|
pmu_regmcfg = regmap_smccfg;
|
|
pmu_regmcfg.max_register = resource_size(res) -
|
|
pmu_regmcfg.reg_stride;
|
|
/* Need physical address for SMC call */
|
|
regmap = devm_regmap_init(dev, NULL,
|
|
(void *)(uintptr_t)res->start,
|
|
&pmu_regmcfg);
|
|
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
|
|
"regmap init failed\n");
|
|
|
|
ret = of_syscon_register_regmap(dev->of_node, regmap);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
/* let syscon create mmio regmap */
|
|
regmap = syscon_node_to_regmap(dev->of_node);
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
|
|
"syscon_node_to_regmap failed\n");
|
|
}
|
|
|
|
pmu_context->pmureg = regmap;
|
|
pmu_context->dev = dev;
|
|
|
|
if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_init)
|
|
pmu_context->pmu_data->pmu_init();
|
|
|
|
platform_set_drvdata(pdev, pmu_context);
|
|
|
|
ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, exynos_pmu_devs,
|
|
ARRAY_SIZE(exynos_pmu_devs), NULL, 0, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (devm_of_platform_populate(dev))
|
|
dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");
|
|
|
|
dev_dbg(dev, "Exynos PMU Driver probe done\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver exynos_pmu_driver = {
|
|
.driver = {
|
|
.name = "exynos-pmu",
|
|
.of_match_table = exynos_pmu_of_device_ids,
|
|
},
|
|
.probe = exynos_pmu_probe,
|
|
};
|
|
|
|
static int __init exynos_pmu_init(void)
|
|
{
|
|
return platform_driver_register(&exynos_pmu_driver);
|
|
|
|
}
|
|
postcore_initcall(exynos_pmu_init);
|